Home » Public Forums » GMCnet » [GMCnet] Birch Screen Door Needs a SERIOUS owner
| [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78411] |
Mon, 29 March 2010 09:01  |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
Good Morning
Sorry if I'm coming across nasty in this email, I'm just disgusted and ticked off about this subject.
I bought a used Birch Screen door last fall and I cannot install it until I can get some parts.
I have contacted Bob B several times and have had a friend of Bob's contact him. NOTHING ! It is apparent that Bob has no intention of doing anything productive or useful with this product in the near future, so why doesn't he sell it or pass it on to someone that will actually provide a product and service that many of us really need ??? What a shame to have a product like this available but basically LOCKED off the market.
I need the plastic that gets put on the coach frame around the door that supports the door when it's closed. People have said you can get this at Home Depot, etc. NO WAY, I have searched the internet to death for anything close and I've personally visited every home center and paneling store that exists in our area, trust me, if someone can find it they're a better person than I am!
Does anyone know where I can get some of this stuff ?? I'm dead in the water until I do, so there sits my Birch Screen Door in the basement.
And Bob, not to be disrespectful, but either do something with this product or give it up so someone else can !
Thanks
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78414 is a reply to message #78411] |
Mon, 29 March 2010 09:30  |
Terry Skinner
Messages: 379
Registered: January 2004
Karma: 0
|
Senior Member |
|
|
have you looked at some of the aluminum extrusions that are avalable??
If you Google "aluminum extrusions profiles" you can get some idea of
what is avalable and might fit your needs,,,,,,,,,,,Terry
On Mon, Mar 29, 2010 at 7:01 AM, Ray Erspamer <78gmc-royale@att.net> wrote:
> Good Morning
>
> Sorry if I'm coming across nasty in this email, I'm just disgusted and ticked off about this subject.
>
> I bought a used Birch Screen door last fall and I cannot install it until I can get some parts.
>
> I have contacted Bob B several times and have had a friend of Bob's contact him. NOTHING ! It is apparent that Bob has no intention of doing anything productive or useful with this product in the near future, so why doesn't he sell it or pass it on to someone that will actually provide a product and service that many of us really need ??? What a shame to have a product like this available but basically LOCKED off the market.
>
> I need the plastic that gets put on the coach frame around the door that supports the door when it's closed. People have said you can get this at Home Depot, etc. NO WAY, I have searched the internet to death for anything close and I've personally visited every home center and paneling store that exists in our area, trust me, if someone can find it they're a better person than I am!
>
> Does anyone know where I can get some of this stuff ?? I'm dead in the water until I do, so there sits my Birch Screen Door in the basement.
>
> And Bob, not to be disrespectful, but either do something with this product or give it up so someone else can !
>
> Thanks
>
>
>
>
>
> Have a great day !!!
> Ray
>
>
> Ray & Lisa Erspamer
> 78 Royale Center Kitchen
> TZE368V101144
> Wauwatosa, Wisconsin 53226
> Email: 78GMC-Royale@att.net
> 414-745-3188
> Web Site: http://ray-lisa.page.tl/
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Terry Skinner
253-686-2624
Roy. Washington
'76 GMC
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78416 is a reply to message #78414] |
Mon, 29 March 2010 09:38 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
Hi Terry....yes, I have also searched for alum extrusion profiles......not much luck without having to jury rig something to work. The plastic that Alex Birch designed would be so simple to install and the profile is perfect.
I do some add'l searching just to make sure I haven't missed anything.
Thanks
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
________________________________
From: Terry Skinner <gmcnut@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Mon, March 29, 2010 9:30:56 AM
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
have you looked at some of the aluminum extrusions that are avalable??
If you Google "aluminum extrusions profiles" you can get some idea of
what is avalable and might fit your needs,,,,,,,,,,,Terry
On Mon, Mar 29, 2010 at 7:01 AM, Ray Erspamer <78gmc-royale@att.net> wrote:
> Good Morning
>
> Sorry if I'm coming across nasty in this email, I'm just disgusted and ticked off about this subject.
>
> I bought a used Birch Screen door last fall and I cannot install it until I can get some parts.
>
> I have contacted Bob B several times and have had a friend of Bob's contact him. NOTHING ! It is apparent that Bob has no intention of doing anything productive or useful with this product in the near future, so why doesn't he sell it or pass it on to someone that will actually provide a product and service that many of us really need ??? What a shame to have a product like this available but basically LOCKED off the market.
>
> I need the plastic that gets put on the coach frame around the door that supports the door when it's closed. People have said you can get this at Home Depot, etc. NO WAY, I have searched the internet to death for anything close and I've personally visited every home center and paneling store that exists in our area, trust me, if someone can find it they're a better person than I am!
>
> Does anyone know where I can get some of this stuff ?? I'm dead in the water until I do, so there sits my Birch Screen Door in the basement.
>
> And Bob, not to be disrespectful, but either do something with this product or give it up so someone else can !
>
> Thanks
>
>
>
>
>
> Have a great day !!!
> Ray
>
>
> Ray & Lisa Erspamer
> 78 Royale Center Kitchen
> TZE368V101144
> Wauwatosa, Wisconsin 53226
> Email: 78GMC-Royale@att.net
> 414-745-3188
> Web Site: http://ray-lisa.page.tl/
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Terry Skinner
253-686-2624
Roy. Washington
'76 GMC
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78429 is a reply to message #78416] |
Mon, 29 March 2010 11:36 |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Ray,
If you will post a photo or point to a previous post of the plastic part and profile you need I will look at our local stores.
Bob B has always been very reponsive and helpful to me on a number of GMC projects. Perhaps something is going on in his life at the moment that prevents him from helping you.
Dennis Sexton
73 GMC 230
Germantown, TN
USA
-----Original Message-----
From: Ray Erspamer <78gmc-royale@att.net>
To: gmclist@temp.gmcnet.org
Sent: Mon, Mar 29, 2010 9:38 am
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
Hi Terry....yes, I have also searched for alum extrusion profiles......not much
uck without having to jury rig something to work. The plastic that Alex
irch designed would be so simple to install and the profile is perfect.
I do some add'l searching just to make sure I haven't missed anything.
Thanks
Have a great day !!!
ay
ay & Lisa Erspamer
8 Royale Center Kitchen
ZE368V101144
auwatosa, Wisconsin 53226
mail: 78GMC-Royale@att.net
14-745-3188
eb Site: http://ray-lisa.page.tl/
_______________________________
rom: Terry Skinner <gmcnut@gmail.com>
o: gmclist@temp.gmcnet.org
ent: Mon, March 29, 2010 9:30:56 AM
ubject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
have you looked at some of the aluminum extrusions that are avalable??
f you Google "aluminum extrusions profiles" you can get some idea of
hat is avalable and might fit your needs,,,,,,,,,,,Terry
On Mon, Mar 29, 2010 at 7:01 AM, Ray Erspamer <78gmc-royale@att.net> wrote:
Good Morning
Sorry if I'm coming across nasty in this email, I'm just disgusted and ticked
ff about this subject.
I bought a used Birch Screen door last fall and I cannot install it until I
an get some parts.
I have contacted Bob B several times and have had a friend of Bob's contact
im. NOTHING ! It is apparent that Bob has no intention of doing anything
roductive or useful with this product in the near future, so why doesn't he
ell it or pass it on to someone that will actually provide a product and
ervice that many of us really need ??? What a shame to have a product like
his available but basically LOCKED off the market.
I need the plastic that gets put on the coach frame around the door that
upports the door when it's closed. People have said you can get this at Home
epot, etc. NO WAY, I have searched the internet to death for anything close
nd I've personally visited every home center and paneling store that exists in
ur area, trust me, if someone can find it they're a better person than I am!
Does anyone know where I can get some of this stuff ?? I'm dead in the water
ntil I do, so there sits my Birch Screen Door in the basement.
And Bob, not to be disrespectful, but either do something with this product or
ive it up so someone else can !
Thanks
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
erry Skinner
53-686-2624
oy. Washington
76 GMC
______________________________________________
MCnet mailing list
ist Information and Subscription Options:
ttp://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
______________________________________________
MCnet mailing list
ist Information and Subscription Options:
ttp://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78444 is a reply to message #78429] |
Mon, 29 March 2010 13:40 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
Hi
Here is a sketch of the Birch Screen Door Molding that I am looking for. It connects to the coach door frame on the top and two sides. Kind of a Frost Beige color that matches the 78 Royale exterior color.
Link is: http://www.gmcmhphotos.com/photos/showphoto.php?photo=32945&title=birch-screen-doorco&cat=5422
If anyone can find any of this, I would greatly appreciate knowing of a source that I could buy it from.
THANKS !
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
________________________________
From: "dennisfsexton@aol.com" <dennisfsexton@aol.com>
To: gmclist@temp.gmcnet.org
Sent: Mon, March 29, 2010 11:36:59 AM
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
Ray,
If you will post a photo or point to a previous post of the plastic part and profile you need I will look at our local stores.
Bob B has always been very reponsive and helpful to me on a number of GMC projects. Perhaps something is going on in his life at the moment that prevents him from helping you.
Dennis Sexton
73 GMC 230
Germantown, TN
USA
-----Original Message-----
From: Ray Erspamer <78gmc-royale@att.net>
To: gmclist@temp.gmcnet.org
Sent: Mon, Mar 29, 2010 9:38 am
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
Hi Terry....yes, I have also searched for alum extrusion profiles......not much
uck without having to jury rig something to work. The plastic that Alex
irch designed would be so simple to install and the profile is perfect.
I do some add'l searching just to make sure I haven't missed anything.
Thanks
Have a great day !!!
ay
ay & Lisa Erspamer
8 Royale Center Kitchen
ZE368V101144
auwatosa, Wisconsin 53226
mail: 78GMC-Royale@att.net
14-745-3188
eb Site: http://ray-lisa.page.tl/
_______________________________
rom: Terry Skinner <gmcnut@gmail.com>
o: gmclist@temp.gmcnet.org
ent: Mon, March 29, 2010 9:30:56 AM
ubject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
have you looked at some of the aluminum extrusions that are avalable??
f you Google "aluminum extrusions profiles" you can get some idea of
hat is avalable and might fit your needs,,,,,,,,,,,Terry
On Mon, Mar 29, 2010 at 7:01 AM, Ray Erspamer <78gmc-royale@att.net> wrote:
Good Morning
Sorry if I'm coming across nasty in this email, I'm just disgusted and ticked
ff about this subject.
I bought a used Birch Screen door last fall and I cannot install it until I
an get some parts.
I have contacted Bob B several times and have had a friend of Bob's contact
im. NOTHING ! It is apparent that Bob has no intention of doing anything
roductive or useful with this product in the near future, so why doesn't he
ell it or pass it on to someone that will actually provide a product and
ervice that many of us really need ??? What a shame to have a product like
his available but basically LOCKED off the market.
I need the plastic that gets put on the coach frame around the door that
upports the door when it's closed. People have said you can get this at Home
epot, etc. NO WAY, I have searched the internet to death for anything close
nd I've personally visited every home center and paneling store that exists in
ur area, trust me, if someone can find it they're a better person than I am!
Does anyone know where I can get some of this stuff ?? I'm dead in the water
ntil I do, so there sits my Birch Screen Door in the basement.
And Bob, not to be disrespectful, but either do something with this product or
ive it up so someone else can !
Thanks
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
erry Skinner
53-686-2624
oy. Washington
76 GMC
______________________________________________
MCnet mailing list
ist Information and Subscription Options:
ttp://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
______________________________________________
MCnet mailing list
ist Information and Subscription Options:
ttp://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78447 is a reply to message #78444] |
Mon, 29 March 2010 14:13 |
Larry C
Messages: 1168
Registered: July 2004
Location: NE Illinois by the Illino...
Karma: 0
|
Senior Member |
|
|
Hey Ray
If this can be made out of wood, I am pretty good with wood and such.
Though not a professional cabinet maker, I have been known to creat some amazing things.
LarC ( Learning new things all the time )
Gatsbys' CRUISER  08-18-04
74 GLACIER X, 260/455-APC-4 Bagg'r
Remflex Manifold gaskets
CampGrounds needed, Add yours to "PLACES" />
http://www.gmceast.com/travel
_
|
|
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78451 is a reply to message #78447] |
Mon, 29 March 2010 14:25 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
Hi Larry
Not a bad idea, sitting here thinking if wood would be strong enough. The thickness of the material is only 1/16". Maybe I make what I need out of Delrin or UHMW. Might be kind of pricey !
Let me think about that one.
SO WHEN ARE WE HAVING STEAKS? Then I'll deliver the seats !
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
________________________________
From: Larry <slawrence111@yahoo.com>
To: gmclist@temp.gmcnet.org
Sent: Mon, March 29, 2010 2:13:03 PM
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
Hey Ray
If this can be made out of wood, I am pretty good with wood and such.
Though not a professional cabinet maker, I have been known to creat some amazing things.
LarC ( Learning new things all the time )
--
Gatsbys' CRUISER :d
74 GLACIER X, 260
455/APC/4 bagg'r(ver3)
Remflex Manifold gaskets
_______________________________________________
Purchased 08-18-04
_
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78452 is a reply to message #78449] |
Mon, 29 March 2010 14:28 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
That is correct Tom, the 3/16" dimension which is actually a 1/8" opening slides over the door frame. then you can see how the rest is recessed into the coach and allows the screen door to fit into the door frame so the outer door can still close.
Not sure if I understand what you mean by the joining thing.
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
________________________________
From: Tom Lins <tlins@optonline.net>
To: gmclist@temp.gmcnet.org
Sent: Mon, March 29, 2010 2:17:21 PM
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
Ray Erspamer wrote on Mon, 29 March 2010 14:40
> Hi
>
> Here is a sketch of the Birch Screen Door Molding that I am looking for. It connects to the coach door frame on the top and two sides. Kind of a Frost Beige color that matches the 78 Royale exterior color.
>
> Link is: http://www.gmcmhphotos.com/photos/showphoto.php?photo=32945&title=birch-screen-doorco&cat=5422
>
> If anyone can find any of this, I would greatly appreciate knowing of a source that I could buy it from.
>
> THANKS !
>
> Have a great day !!!
> Ray
>
>
> Ray & Lisa Erspamer
> 78 Royale Center Kitchen
Ray
Am I correct that the small channel holds onto the metal lip around the door frame?
It looks like a joiner that you would use join two different thicknesses of masonite together modified by removing one of the lips altogether and shortening one of the other lips.
--
Tom Lins
Milltown, NJ
78 xPB
GMC Dealer Training Tapes on CD
GMC Maintenance Manuals on CD
www.bdub.net/tomlins/
http://www.escapees.com
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78455 is a reply to message #78454] |
Mon, 29 March 2010 14:47 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
You bet Tom. Some people out here said you can find this stuff at paneling shops or at Lowes or Home Depot, I've looked at every shop I could find, nothing even close.
Thanks for mentioning it.
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
________________________________
From: Tom Lins <tlins@optonline.net>
To: gmclist@temp.gmcnet.org
Sent: Mon, March 29, 2010 2:42:09 PM
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
Ray Erspamer wrote on Mon, 29 March 2010 15:28
> Not sure if I understand what you mean by the joining thing.
Did you ever look at how two of those off white waterproof panels are joined together in cheesy gas station bathroom remodels? They use a h channel to join the two 1/8 inch panels together.
Well there are other h channels to join the edges of 1/2 inch waterproof panes flush with 1/8 inch waterproof panels. Just find some of that and modify it to fit.
Google plastic extrusion companies and see fir they have online catalogs. I am sure I have seen extrusions that look like they could be modified for your use. I doubt Alex had that stuff made just for him but there are also compnies that will extrude anything you are willing to pay for.
--
Tom Lins
Milltown, NJ
78 xPB
GMC Dealer Training Tapes on CD
GMC Maintenance Manuals on CD
www.bdub.net/tomlins/
http://www.escapees.com
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78462 is a reply to message #78411] |
Mon, 29 March 2010 17:11 |
GeorgeRud
Messages: 1380
Registered: February 2007
Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
There's a company called Outwater Plastics (1-800-631-8375) that seems to carry a lot of that sort of stuff in plastic and metal.
I have their catalog, and if I can find anything, I'll try to get you a part number.
Good luck with your project. I know how frustrating it can be when you're this close and can't finish a project!
George Rudawsky
Chicago, IL
75 Palm Beach
[Updated on: Mon, 29 March 2010 17:11] Report message to a moderator |
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78469 is a reply to message #78462] |
Mon, 29 March 2010 18:39 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
Thanks George, I appreciate your help.
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
________________________________
From: George Rudawsky <GeorgeRud@aol.com>
To: gmclist@temp.gmcnet.org
Sent: Mon, March 29, 2010 3:11:28 PM
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
There's a company called Outwater Plastics (1-800-631-8375)that seems to carry a lot of that sort of stuff in plastic and metal.
I have their catalog, and if I can find anything, I'll try to get you a part number.
Good luck with your project. I know how frustrating it can be when you're this close and can't finish a project!
--
George Rudawsky
Chicago, IL
75 Palm Beach
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78474 is a reply to message #78471] |
Mon, 29 March 2010 19:10 |
GMCWiperMan
Messages: 1248
Registered: December 2007
Karma: 1
|
Senior Member |
|
|
Ray,
I hope you have better luck with your Birch door installation than I had.
In early 2000, while completing the coach renovation in preparation for our
May departure for Alaska, I installed one. I met Pete Pappas in Marianna,
FL, on I-10, to get the door because I KNEW from previous visits about their
state bird -- the mosquito. He was on the way to GMCMI Rayne, LA and had an
extra Birch door.
I spent the next week of my life trying to get that darned thing to fit the
way I thought it should, including allowing me to close and latch the entry
door with the help of a neighbor and his little kid! Never did get the
darned thing to fit really properly; the door was always a little too
difficult to latch. To top it off, for some reason we had no significant
mosquito problem: the few we saw were so big and clumsy you could knock
them off before they had a chance to start drilling.
First thing I did when I got home was remove the thing. Then I sold it to
someone I didn't expect to ever see again. :-)
In the unlikely event I ever get the urge again, it will be satisfied with a
folding door, similar to the Phantom.
Ken H.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78481 is a reply to message #78474] |
Mon, 29 March 2010 19:34 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Ken,
IIRC someone noted in an email to the GMC net that Alex used to spend HOURS
getting these doors to fit and close correctly when he installed them.
Guess I'm lucky the one on Double Trouble fits great and closes easily!
Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Ken Henderson
Sent: Tuesday, 30 March 2010 11:10 AM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
Ray,
I spent the next week of my life trying to get that darned thing to fit the
way I thought it should, including allowing me to close and latch the entry
door with the help of a neighbor and his little kid! Never did get the
darned thing to fit really properly; the door was always a little too
difficult to latch. To top it off, for some reason we had no significant
mosquito problem: the few we saw were so big and clumsy you could knock
them off before they had a chance to start drilling.
First thing I did when I got home was remove the thing. Then I sold it to
someone I didn't expect to ever see again. :-)
In the unlikely event I ever get the urge again, it will be satisfied with a
folding door, similar to the Phantom.
Ken H.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78529 is a reply to message #78481] |
Mon, 29 March 2010 22:52 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I'm glad to see that we are having the problem and addressing it in some way.
Extrusions are the main stopper in cost of this kit.
We spend several thousand dollars on new aluminum extrusions for our
filter housings and have heard that the plastic ones are just as
pricey.
On Mon, Mar 29, 2010 at 5:34 PM, Rob Mueller <robmueller@iinet.net.au> wrote:
> Ken,
>
> IIRC someone noted in an email to the GMC net that Alex used to spend HOURS
> getting these doors to fit and close correctly when he installed them.
>
> Guess I'm lucky the one on Double Trouble fits great and closes easily!
>
> Regards,
> Rob Mueller
> Sydney, Australia
> AUS '75 Avion-The Blue Streak TZE365V100428
> USA '75 Avion-Double Trouble TZE365V100426
>
> -----Original Message-----
> From: gmclist-bounces@temp.gmcnet.org
> [mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Ken Henderson
> Sent: Tuesday, 30 March 2010 11:10 AM
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
>
> Ray,
>
> I spent the next week of my life trying to get that darned thing to fit the
> way I thought it should, including allowing me to close and latch the entry
> door with the help of a neighbor and his little kid! Â Never did get the
> darned thing to fit really properly; the door was always a  little too
> difficult to latch. Â To top it off, for some reason we had no significant
> mosquito problem: Â the few we saw were so big and clumsy you could knock
> them off before they had a chance to start drilling.
>
> First thing I did when I got home was remove the thing. Â Then I sold it to
> someone I didn't expect to ever see again. :-)
>
> In the unlikely event I ever get the urge again, it will be satisfied with a
> folding door, similar to the Phantom.
>
> Ken H.
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner [message #78550 is a reply to message #78458] |
Tue, 30 March 2010 07:49 |
Ray Erspamer
Messages: 1707
Registered: May 2007
Location: Milwaukee Wisconsin
Karma: -3
|
Senior Member |
|
|
Interesting that you posted this Jim, I was at Lowes on Saturday and I was looking at this EXACT material, I thought, WOW, I wonder if this would work! I then thought that the door needed something more solid and firm to seal against. But this has an excellent profile and the one edge would lock into the space between the wall paneling and the coach door frame. I may just give this a shot!
Thanks so much for sending the info !!
For the others, here is a link to the site showing it's profile....
http://www.mdteam.com/products.php?category=213
Have a great day !!!
Ray
Ray & Lisa Erspamer
78 Royale Center Kitchen
TZE368V101144
Wauwatosa, Wisconsin 53226
Email: 78GMC-Royale@att.net
414-745-3188
Web Site: http://ray-lisa.page.tl/
________________________________
From: Jim Wagner <slwjmw@sbcglobal.net>
To: gmclist@temp.gmcnet.org
Sent: Mon, March 29, 2010 3:37:46 PM
Subject: Re: [GMCnet] Birch Screen Door Needs a SERIOUS owner
Ray,
I used weathersrip on our door. Works well. Seals tight. The label reads
"MD white vinyl clad replacement weatherstrip"
Jim Wagner
Brook Park, oh
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ray Erspamer
78 GMC Royale Center Kitchen
403, 3.70 Final Drive
Holley Sniper Quadrajet EFI System,
Holley Hyperspark Ignition System
414-484-9431
|
|
|
|
Goto Forum:
Current Time: Mon Nov 18 23:24:56 CST 2024
Total time taken to generate the page: 0.01060 seconds
|
GMCforum
Search
Help
Register
Login
Home
