[GMCnet] 455 Serpentine belt system. [message #78091 is a reply to message #78079] |
Fri, 26 March 2010 14:42 |
GMC_LES
Messages: 569 Registered: October 2009 Location: Montreal
Karma:
|
Senior Member |
|
|
I'm looking for feedback from those of you who have done a serpentine belt
conversion on their 455. Pros & cons. I've heard that some have taken the
serpentine setup off due to problems. What where the problems?
I want to upgrade to a CS130D alternator, Sanden type A/C compressor, and a
newer PS pump with a hydroboost return port. These accessories can easily be
found used in the men's malls and most come with serpentine pulleys
nowadays. Doing a serpentine conversion might reduce the overall difficulty
in finding suitable accessories. Custom brackets will no doubt be required,
but I'm good at that.
I am also curious if anyone has done a serpentine conversion that spins the
water pump & fan in the original direction? I'd prefer this simply so that
replacement waterpumps are easier to find. I don't want to have to look for
another fan or special water pump.
What Crank & water pump pulleys are being used? What tensioner? Knowing this
info would save me a bit of time in looking for suitable donor parts.
Thanks,
Les Burt
Montreal
'75 EL2
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Les Burt
Montreal
1975 Eleganza 26ft
A work in Progress
|
|
|