| [GMCnet] Cad Not on the Road Yet [message #76649] |
Sun, 14 March 2010 19:06  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
|
Senior Member |
|
|
Well, I finally got everything cleaned up, the leaks stopped (even the oil
filter was leaking!), the engine hatch cover raised, and my courage up for
the test drive. Made it about 1 foot before I got scared out of my wits by
a big scraping noise -- only when moving forward. Out & under didn't help
any. Finally got to the end of the driveway but only to pull right back
down to the shop -- scraping with the slightest acceleration.
I knew I had more fan clearance from the shroud at the bottom than the top,
but thought the 3/8" or so at top would be OK -- Nope. Even a tiny bit of
acceleration let the fan touch the top of the Jenkins shroud. I don't
expect much trouble correcting the problem tomorrow. Then there will
probably be another Gotcha. :-(
Texas or Bust? (Bust what??? -- I'm beginning to wonder.)
Ken H.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
