GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » stubborn Lower ball joint
stubborn Lower ball joint [message #76249] Wed, 10 March 2010 11:09 Go to next message
seven is currently offline  seven   Canada
Messages: 322
Registered: July 2008
Location: Calgary Canada
Karma: 0
Senior Member
I am doing my front bearings "one is so bad" and have one lower ball joint that will not release, Have the necessary forks but do not want to keep beeting till a break the lower control arm,
Any suggestions?



Jay Fox Calgary AB
73 Painted Desert (Turtle)
78 Transmode (Trailer Donor)

[Updated on: Wed, 10 March 2010 11:09]

Report message to a moderator

Re: stubborn Lower ball joint [message #76261 is a reply to message #76249] Wed, 10 March 2010 12:59 Go to previous messageGo to next message
seven is currently offline  seven   Canada
Messages: 322
Registered: July 2008
Location: Calgary Canada
Karma: 0
Senior Member
Got it!

Jay Fox Calgary AB
73 Painted Desert (Turtle)
78 Transmode (Trailer Donor)
Re: stubborn Lower ball joint [message #76264 is a reply to message #76249] Wed, 10 March 2010 14:05 Go to previous messageGo to next message
Duce Apocalypse is currently offline  Duce Apocalypse   United States
Messages: 824
Registered: May 2009
Location: Los angeles
Karma: 0
Senior Member

when using the fork make sure you use a 2 kilo hammer, the normal 16 ouncers wont cut the mustard....

73 Canyon Lands, (a.k.a. The Yellow Submarine) West Los Angeles CA
Re: [GMCnet] stubborn Lower ball joint [message #76280 is a reply to message #76249] Wed, 10 March 2010 16:08 Go to previous messageGo to next message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
I have urethane replacement dust covers if you plan on reusing the old
ball joint. You must have destroyed the original rubber dust cover
unless your reeeeeely good swinging that hammer.

On Wed, Mar 10, 2010 at 10:09 AM, Jay Fox <amra@shaw.ca> wrote:
>
>
> I am doing my front bearings "one is so bad" and have one lower ball joint that will not release, Have the necessary forks but do not want to keep baeting till a break the lower control arm,
> Any suggestions?
>
>
> --
> Jay Fox
> Calgary AB Canada
>
>
> 73 Painted Desert (Turtle)
> Wifes 75 Transmode (Unutter1)
> 78 Transmode (Donor)
>
> Official Club Haulers
>
> http://www.amra.ca
> http://www.amra.ca/Club%20Hauler.htm
> http://www.amra.ca/Pictures/Club%20Haulers%202/
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] stubborn Lower ball joint [message #76313 is a reply to message #76280] Wed, 10 March 2010 22:13 Go to previous messageGo to next message
seven is currently offline  seven   Canada
Messages: 322
Registered: July 2008
Location: Calgary Canada
Karma: 0
Senior Member
Thanks Steve but while I,m in there it will all be new.


Jay Fox Calgary AB
73 Painted Desert (Turtle)
78 Transmode (Trailer Donor)
Re: [GMCnet] stubborn Lower ball joint [message #76398 is a reply to message #76280] Fri, 12 March 2010 06:08 Go to previous messageGo to next message
Carleton Douglas[1] is currently offline  Carleton Douglas[1]   United States
Messages: 174
Registered: March 2006
Karma: 0
Senior Member
Steve, just a short time and the rubber is gone on the new front end
parts, like less than a year, all must be made in China.

I need a set for my coach, when you get time send me a set all are
gone just sitting there.

I will send check, let me know how much and you addy.

On Wed, Mar 10, 2010 at 3:08 PM, Steven Ferguson <botiemad11@gmail.com> wrote:
> I have urethane replacement dust covers if you plan on reusing the old
> ball joint.  You must have destroyed the original rubber dust cover
> unless your reeeeeely good swinging that hammer.
>
> On Wed, Mar 10, 2010 at 10:09 AM, Jay Fox <amra@shaw.ca> wrote:
>>
>>
>> I am doing my front bearings "one is so bad" and have one lower ball joint that will not release, Have the necessary forks but do not want to keep baeting till a break the lower control arm,
>> Any suggestions?
>>
>>
>> --
>> Jay Fox
>> Calgary AB Canada
>>
>>
>> 73 Painted Desert (Turtle)
>> Wifes 75 Transmode (Unutter1)
>> 78 Transmode (Donor)
>>
>> Official Club Haulers
>>
>> http://www.amra.ca
>> http://www.amra.ca/Club%20Hauler.htm
>> http://www.amra.ca/Pictures/Club%20Haulers%202/
>> _______________________________________________
>> GMCnet mailing list
>> List Information and Subscription Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Steve Ferguson
> '76 EII
> Sierra Vista, AZ
> Urethane bushing source
> www.bdub.net/ferguson/
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Carleton Douglas
73 custom, by myself
Prescott, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] stubborn Lower ball joint [message #76406 is a reply to message #76398] Fri, 12 March 2010 06:27 Go to previous messageGo to next message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
Carlton,
Which rubber is gone? Bushngs or dust covers?
I only sell urethane dust covers and urethane lower bushings.
Steve Ferguson
PO Box 1777
Sierra Vista, AZ 85636

How many of which do you want Carlton?

On Fri, Mar 12, 2010 at 5:08 AM, Carleton Douglas <aecsdouglas@gmail.com> wrote:
I need a set for my coach, when you get time send me a set all are
gone just sitting there.
I will send check, let me know how much and you addy.


--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] stubborn Lower ball joint [message #76407 is a reply to message #76406] Fri, 12 March 2010 06:28 Go to previous messageGo to next message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
I should have added that I might be making a jaunt to Mesa and if I
do, I can save you some shipping.

On Fri, Mar 12, 2010 at 5:27 AM, Steven Ferguson <botiemad11@gmail.com> wrote:
> Carlton,
>  Which rubber is gone?  Bushngs or dust covers?
> I only sell urethane dust covers and urethane lower bushings.
> Steve Ferguson
> PO Box 1777
> Sierra Vista, AZ 85636
>
> How many of which do you want Carlton?
>
> On Fri, Mar 12, 2010 at 5:08 AM, Carleton Douglas <aecsdouglas@gmail.com> wrote:
>  I need a set for my coach, when you get time send me a set all are
>  gone just sitting there.
>  I will send check, let me know how much and you addy.
>
>
> --
> Steve Ferguson
> '76 EII
> Sierra Vista, AZ
> Urethane bushing source
> www.bdub.net/ferguson/
>



--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] stubborn Lower ball joint [message #76408 is a reply to message #76406] Fri, 12 March 2010 06:46 Go to previous messageGo to next message
Carleton Douglas[1] is currently offline  Carleton Douglas[1]   United States
Messages: 174
Registered: March 2006
Karma: 0
Senior Member
Steve it is the dust covers, for now.

Thanks, Carleton
Carleton Douglas
5656 Thistle Drive
Prescott, AZ 86305

On Fri, Mar 12, 2010 at 5:27 AM, Steven Ferguson <botiemad11@gmail.com> wrote:
> Carlton,
>  Which rubber is gone?  Bushngs or dust covers?
> I only sell urethane dust covers and urethane lower bushings.
> Steve Ferguson
> PO Box 1777
> Sierra Vista, AZ 85636
>
> How many of which do you want Carlton?
>
> On Fri, Mar 12, 2010 at 5:08 AM, Carleton Douglas <aecsdouglas@gmail.com> wrote:
>  I need a set for my coach, when you get time send me a set all are
>  gone just sitting there.
>  I will send check, let me know how much and you addy.
>
>
> --
> Steve Ferguson
> '76 EII
> Sierra Vista, AZ
> Urethane bushing source
> www.bdub.net/ferguson/
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Carleton Douglas
73 custom, by myself
Prescott, AZ
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] stubborn Lower ball joint [message #76518 is a reply to message #76408] Sat, 13 March 2010 06:26 Go to previous message
Steven Ferguson is currently offline  Steven Ferguson   United States
Messages: 3447
Registered: May 2006
Karma: 0
Senior Member
Carlton,
Haven't heard back from you yet. I sen't an off-net post two days
ago re dust boots.

On Fri, Mar 12, 2010 at 5:46 AM, Carleton Douglas <aecsdouglas@gmail.com> wrote:
> Steve it is the dust covers, for now.
>
> Thanks, Carleton
> Carleton Douglas
> 5656 Thistle Drive
> Prescott, AZ 86305
>
> On Fri, Mar 12, 2010 at 5:27 AM, Steven Ferguson <botiemad11@gmail.com> wrote:
>> Carlton,
>>  Which rubber is gone?  Bushngs or dust covers?
>> I only sell urethane dust covers and urethane lower bushings.
>> Steve Ferguson
>> PO Box 1777
>> Sierra Vista, AZ 85636
>>
>> How many of which do you want Carlton?
>>
>> On Fri, Mar 12, 2010 at 5:08 AM, Carleton Douglas <aecsdouglas@gmail.com> wrote:
>>  I need a set for my coach, when you get time send me a set all are
>>  gone just sitting there.
>>  I will send check, let me know how much and you addy.
>>
>>
>> --
>> Steve Ferguson
>> '76 EII
>> Sierra Vista, AZ
>> Urethane bushing source
>> www.bdub.net/ferguson/
>> _______________________________________________
>> GMCnet mailing list
>> List Information and Subscription Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Carleton Douglas
> 73 custom, by myself
> Prescott, AZ
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Previous Topic: The Vendor Question
Next Topic: Check your front bearings!
Goto Forum:
  


Current Time: Sat Nov 16 14:26:36 CST 2024

Total time taken to generate the page: 0.02507 seconds