GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] Engine Block Heater ?
Re: [GMCnet] Engine Block Heater ? [message #76235] Wed, 10 March 2010 09:30 Go to previous message
Terry Skinner is currently offline  Terry Skinner   United States
Messages: 379
Registered: January 2004
Karma:
Senior Member
Denny, have you tried a thicker phonic block between the carb and
manifold?? Or maybe doubling them??............Terry

On Wed, Mar 10, 2010 at 6:10 AM, Rick Denney <rick@rickdenney.com> wrote:
> Terry writes...
>>
>> Next time you run your GMC upon stopping and turning the
>> engine off
>> take the air cleaner off and look down the throat of the
>> carb. There
>> is a good chance you will see gas percolating. I can
>> understand you
>> wanting to add the fuel pump. That would be the
>> easiest/cheapest, but
>> if it doesn't fix the base problem why bother
>
> Terry, the hot crossover will certainly boil out the gasoline
> from the carb, but I find that the gasoline boils out to some
> extent even with a manifold that has no crossover. And the
> fuel can still evaporate out during winter storage. The fuel
> pump is palliative, to be sure--it only cures the symptoms of
> these problems. But it does do that pretty sensibly.
>
> Curing the problem beyond blocking the crossover might not be
> that easy.
>
> Rick "who still has to refill the float bowl on occasion"
> Denney
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Terry Skinner
253-686-2624
Roy. Washington
'76 GMC
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Charter Online - Once again
Next Topic: Extended Rear Bumper
Goto Forum:
  


Current Time: Tue Nov 19 04:28:55 CST 2024

Total time taken to generate the page: 0.01004 seconds