GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Best laid plans, page six, epilog……….
[GMCnet] Best laid plans, page six, epilog………. [message #75474] Tue, 02 March 2010 23:23 Go to previous message
Terry Skinner is currently offline  Terry Skinner   United States
Messages: 379
Registered: January 2004
Karma:
Senior Member
Best laid plans, page six, epilog……….Funny how good hindsight is.
Normally when I go to retrieve a GMC I drive a towed and have room for
all my special GMC tools. This time I was flying in and with the
restrictions on baggage I had to cut way back on tools. A lot of time
was wasted looking for Home Depot, Harbor Freight, Walmart, Ace
Hardware and like that. Maybe I would have been better off to pay for
extra baggage. The other thing is I should have had a look for my
self. Round trip tickets are cheap purchased ahead of time. Go take a
real-time look at everything. As for the tires, they never gave me a
bit of trouble. I have a set of Alcoas and tires ready to go on this
coach once I got it back here. That was why I “ rolled the dice”.
Otherwise I would have had the new owner make arrangements to pick
some up along the way. As for this gas tank problem, this is getting
to be pretty common with the gas we have now and how old our coaches
are getting to be. I am going to start looking for a 20 gallon fuel
bladder that I can roll up and take along. The spark plugs were set at
0.065 which brings me to believe that it has been a long time between
tune-ups. Now to the sixty four thousand dollar question. Why??
Several times the owner tried to get me to put the GMC in storage and
fly home. Not a chance. I was already there and we might as well get
this job done. Just that simple. Besides, I have got some great
stories to tell at the next GMC rally…………Terry

--
Terry Skinner
253-686-2624
Roy. Washington
'76 GMC
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Aluminum wheel offset
Next Topic: [GMCnet] Swingaway Step Co.
Goto Forum:
  


Current Time: Sat Sep 21 09:18:48 CDT 2024

Total time taken to generate the page: 0.00779 seconds