GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Swingaway Step Co.
[GMCnet] Swingaway Step Co. [message #75440] Tue, 02 March 2010 18:38 Go to next message
UziYaH is currently offline  UziYaH   United States
Messages: 282
Registered: July 2007
Location: 10-O-C
Karma: 0
Senior Member
A friend of mine needs schematic information for the circuit board for his Swingaway Step made in San Antonio, TX.
 
Is there any information on this step?
 
Thanks,
 
Howard Nylander
Greeneville, TN.



_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Howard Nylander
Royale Class of "78" "Rocinate"
E-10-o-C

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75441 is a reply to message #75440] Tue, 02 March 2010 18:49 Go to previous messageGo to next message
John Sharpe is currently offline  John Sharpe   United States
Messages: 489
Registered: February 2006
Location: Texas
Karma: 1
Senior Member
Howard, Ken Rose should know Rolling Eyes . Send me an offline e-mail and I'll try to hook you up. Jim K may also know. Hope to see you in Bean Station.

John Sharpe
Humble,TX
'78 Eleganza TBI
'89 Spectrum 2000 MPI V-10
'40 Ford Panel Delivery TPI
johnasharpe@gmail.com

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75443 is a reply to message #75441] Tue, 02 March 2010 19:02 Go to previous messageGo to next message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
Ken Rose is the guy to get you the info.
I was going to purchase the rights to make the automatic step but
there was not enough intrest in them to do it.

On Tue, Mar 2, 2010 at 4:49 PM, John Sharpe <johnasharpe@earthlink.net> wrote:
>
>
> Howard,  Ken Rose should know  :roll: . Send me an offline e-mail and I'll try to hook you up.  Jim K may also know.  Hope to see you in Bean Station.
>
>
> --
> John Sharpe
> Humble,TX
> '40 Ford Deluxe TBI
> '78 Eleganza TBI
> '78 Royale TBI
> mailto:johnasharpe@earthlink.net
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75456 is a reply to message #75440] Tue, 02 March 2010 19:57 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
did you look here?

http://gmcmotorhome.info/projects.html#paper

gene


On Tue, Mar 2, 2010 at 4:38 PM, Howard Nylander <uziyah@yahoo.com> wrote:

> A friend of mine needs schematic information for the circuit board for his
> Swingaway Step made in San Antonio, TX.
>
> Is there any information on this step?
>
> Thanks,
>
> Howard Nylander
> Greeneville, TN.
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75457 is a reply to message #75443] Tue, 02 March 2010 19:59 Go to previous messageGo to next message
UziYaH is currently offline  UziYaH   United States
Messages: 282
Registered: July 2007
Location: 10-O-C
Karma: 0
Senior Member
Thanks John and Jim. Will post John privately.
 
Howard Nylander

--- On Tue, 3/2/10, Jim Kanomata <jimkanomata@gmail.com> wrote:


From: Jim Kanomata <jimkanomata@gmail.com>
Subject: Re: [GMCnet] Swingaway Step Co.
To: gmclist@temp.gmcnet.org
Date: Tuesday, March 2, 2010, 8:02 PM


Ken Rose is the guy to get you the info.
I was going to purchase the rights to make the automatic step but
there was not enough intrest in them to do it.

On Tue, Mar 2, 2010 at 4:49 PM, John Sharpe <johnasharpe@earthlink.net> wrote:
>
>
> Howard,  Ken Rose should know  :roll: . Send me an offline e-mail and I'll try to hook you up.  Jim K may also know.  Hope to see you in Bean Station.
>
>
> --
> John Sharpe
> Humble,TX
> '40 Ford Deluxe TBI
> '78 Eleganza TBI
> '78 Royale TBI
> mailto:johnasharpe@earthlink.net
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist




_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Howard Nylander
Royale Class of "78" "Rocinate"
E-10-o-C

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75458 is a reply to message #75457] Tue, 02 March 2010 20:02 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
did you get my post with the schematic ???

gene


On Tue, Mar 2, 2010 at 5:59 PM, Howard Nylander <uziyah@yahoo.com> wrote:

> Thanks John and Jim. Will post John privately.
>
> Howard Nylander
>
> --- On Tue, 3/2/10, Jim Kanomata <jimkanomata@gmail.com> wrote:
>
>
> From: Jim Kanomata <jimkanomata@gmail.com>
> Subject: Re: [GMCnet] Swingaway Step Co.
> To: gmclist@temp.gmcnet.org
> Date: Tuesday, March 2, 2010, 8:02 PM
>
>
> Ken Rose is the guy to get you the info.
> I was going to purchase the rights to make the automatic step but
> there was not enough intrest in them to do it.
>
> On Tue, Mar 2, 2010 at 4:49 PM, John Sharpe <johnasharpe@earthlink.net>
> wrote:
> >
> >
> > Howard, Ken Rose should know :roll: . Send me an offline e-mail and
> I'll try to hook you up. Jim K may also know. Hope to see you in Bean
> Station.
> >
> >
> > --
> > John Sharpe
> > Humble,TX
> > '40 Ford Deluxe TBI
> > '78 Eleganza TBI
> > '78 Royale TBI
> > mailto:johnasharpe@earthlink.net
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75460 is a reply to message #75440] Tue, 02 March 2010 20:17 Go to previous messageGo to next message
zhagrieb is currently offline  zhagrieb   United States
Messages: 676
Registered: August 2009
Location: Portland Oregon
Karma: 0
Senior Member
I have a step that swings away. Don't know the brand. It's inoperative at
the moment and the circuit board is in my "stuff" locker. I should be able
to dupe out the wiring if needed.

Glenn Giere

On Tue, Mar 2, 2010 at 4:38 PM, Howard Nylander <uziyah@yahoo.com> wrote:

> A friend of mine needs schematic information for the circuit board for his
> Swingaway Step made in San Antonio, TX.
>
> Is there any information on this step?
>
> Thanks,
>
> Howard Nylander
> Greeneville, TN.
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Glenn Giere, Portland OR, K7GAG '73 "Moby the Motorhome" 26'

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75461 is a reply to message #75460] Tue, 02 March 2010 20:40 Go to previous messageGo to next message
psakw is currently offline  psakw   United States
Messages: 61
Registered: February 2010
Karma: 0
Member
I need the gearing for the swing away step if anyone knows where to buy it.
My Electric works but I think the gears are stripped

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75464 is a reply to message #75460] Tue, 02 March 2010 21:27 Go to previous messageGo to next message
UziYaH is currently offline  UziYaH   United States
Messages: 282
Registered: July 2007
Location: 10-O-C
Karma: 0
Senior Member
Thanks Glenn. Much appreciated. Will pass this post on to my friend.
 
Howard N.

--- On Tue, 3/2/10, Glenn Giere <glenngiere@gmail.com> wrote:


From: Glenn Giere <glenngiere@gmail.com>
Subject: Re: [GMCnet] Swingaway Step Co.
To: gmclist@temp.gmcnet.org
Date: Tuesday, March 2, 2010, 9:17 PM


I have a step that swings away.  Don't know the brand.  It's inoperative at
the moment and the circuit board is in my "stuff" locker.  I should be able
to dupe out the wiring if needed.

Glenn Giere

On Tue, Mar 2, 2010 at 4:38 PM, Howard Nylander <uziyah@yahoo.com> wrote:

> A friend of mine needs schematic information for the circuit board for his
> Swingaway Step made in San Antonio, TX.
>
> Is there any information on this step?
>
> Thanks,
>
> Howard Nylander
> Greeneville, TN.
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist




_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Howard Nylander
Royale Class of "78" "Rocinate"
E-10-o-C

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75516 is a reply to message #75458] Wed, 03 March 2010 10:29 Go to previous messageGo to next message
UziYaH is currently offline  UziYaH   United States
Messages: 282
Registered: July 2007
Location: 10-O-C
Karma: 0
Senior Member
Hi Gene,  ...yes, I got the schematic along with other great pictures. Are you today's MVP? I think so. Thanks again on my behalf and the other requesting the info. Much appreciated.
 
Howard Nylander


--- On Tue, 3/2/10, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:


From: Mr.erf ERFisher <mr.erfisher@gmail.com>
Subject: Re: [GMCnet] Swingaway Step Co.
To: gmclist@temp.gmcnet.org
Date: Tuesday, March 2, 2010, 9:02 PM


did you get my post with the schematic ???

gene


On Tue, Mar 2, 2010 at 5:59 PM, Howard Nylander <uziyah@yahoo.com> wrote:

> Thanks John and Jim. Will post John privately.
>
> Howard Nylander
>
> --- On Tue, 3/2/10, Jim Kanomata <jimkanomata@gmail.com> wrote:
>
>
> From: Jim Kanomata <jimkanomata@gmail.com>
> Subject: Re: [GMCnet] Swingaway Step Co.
> To: gmclist@temp.gmcnet.org
> Date: Tuesday, March 2, 2010, 8:02 PM
>
>
> Ken Rose is the guy to get you the info.
> I was going to purchase the rights to make the automatic step but
> there was not enough intrest in them to do it.
>
> On Tue, Mar 2, 2010 at 4:49 PM, John Sharpe <johnasharpe@earthlink.net>
> wrote:
> >
> >
> > Howard,  Ken Rose should know  :roll: . Send me an offline e-mail and
> I'll try to hook you up.  Jim K may also know.  Hope to see you in Bean
> Station.
> >
> >
> > --
> > John Sharpe
> > Humble,TX
> > '40 Ford Deluxe TBI
> > '78 Eleganza TBI
> > '78 Royale TBI
> > mailto:johnasharpe@earthlink.net
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist




_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Howard Nylander
Royale Class of "78" "Rocinate"
E-10-o-C

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75518 is a reply to message #75516] Wed, 03 March 2010 10:31 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
yep , please note I did not post the pix, just pointed to them, want to
be sure folks get their credit ;>)

gene



On Wed, Mar 3, 2010 at 8:29 AM, Howard Nylander <uziyah@yahoo.com> wrote:

> Hi Gene, ...yes, I got the schematic along with other great pictures. Are
> you today's MVP? I think so. Thanks again on my behalf and the other
> requesting the info. Much appreciated.
>
> Howard Nylander
>
>
> --- On Tue, 3/2/10, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
>
>
> From: Mr.erf ERFisher <mr.erfisher@gmail.com>
> Subject: Re: [GMCnet] Swingaway Step Co.
> To: gmclist@temp.gmcnet.org
> Date: Tuesday, March 2, 2010, 9:02 PM
>
>
> did you get my post with the schematic ???
>
> gene
>
>
> On Tue, Mar 2, 2010 at 5:59 PM, Howard Nylander <uziyah@yahoo.com> wrote:
>
> > Thanks John and Jim. Will post John privately.
> >
> > Howard Nylander
> >
> > --- On Tue, 3/2/10, Jim Kanomata <jimkanomata@gmail.com> wrote:
> >
> >
> > From: Jim Kanomata <jimkanomata@gmail.com>
> > Subject: Re: [GMCnet] Swingaway Step Co.
> > To: gmclist@temp.gmcnet.org
> > Date: Tuesday, March 2, 2010, 8:02 PM
> >
> >
> > Ken Rose is the guy to get you the info.
> > I was going to purchase the rights to make the automatic step but
> > there was not enough intrest in them to do it.
> >
> > On Tue, Mar 2, 2010 at 4:49 PM, John Sharpe <johnasharpe@earthlink.net>
> > wrote:
> > >
> > >
> > > Howard, Ken Rose should know :roll: . Send me an offline e-mail and
> > I'll try to hook you up. Jim K may also know. Hope to see you in Bean
> > Station.
> > >
> > >
> > > --
> > > John Sharpe
> > > Humble,TX
> > > '40 Ford Deluxe TBI
> > > '78 Eleganza TBI
> > > '78 Royale TBI
> > > mailto:johnasharpe@earthlink.net
> > > _______________________________________________
> > > GMCnet mailing list
> > > List Information and Subscription Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Jim Kanomata
> > Applied/GMC, Fremont,CA
> > jimk@appliedairfilters.com
> > http://www.appliedgmc.com
> > 1-800-752-7502
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> >
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75521 is a reply to message #75461] Wed, 03 March 2010 10:38 Go to previous messageGo to next message
UziYaH is currently offline  UziYaH   United States
Messages: 282
Registered: July 2007
Location: 10-O-C
Karma: 0
Senior Member
I think the gear is gone on mine as well, and would like to know where one might be found. Anyone got a stockpile of old swing steps?
 
Thanks,
 
Howard Nylander
Greeneville, TN

--- On Tue, 3/2/10, paul array <pumppal1@aol.com> wrote:


From: paul array <pumppal1@aol.com>
Subject: Re: [GMCnet] Swingaway Step Co.
To: gmclist@temp.gmcnet.org
Date: Tuesday, March 2, 2010, 9:40 PM




I need the gearing for the swing away step if anyone knows where to buy it.
My Electric works but I think the gears are stripped
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist




_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Howard Nylander
Royale Class of "78" "Rocinate"
E-10-o-C

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75533 is a reply to message #75516] Wed, 03 March 2010 13:01 Go to previous messageGo to next message
zhagrieb is currently offline  zhagrieb   United States
Messages: 676
Registered: August 2009
Location: Portland Oregon
Karma: 0
Senior Member
I could use a copy too. Save me some diddling when I repair mine. Glenn
Giere

On Wed, Mar 3, 2010 at 8:29 AM, Howard Nylander <uziyah@yahoo.com> wrote:

> Hi Gene, ...yes, I got the schematic along with other great pictures. Are
> you today's MVP? I think so. Thanks again on my behalf and the other
> requesting the info. Much appreciated.
>
> Howard Nylander
>
>
> --- On Tue, 3/2/10, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
>
>
> From: Mr.erf ERFisher <mr.erfisher@gmail.com>
> Subject: Re: [GMCnet] Swingaway Step Co.
> To: gmclist@temp.gmcnet.org
> Date: Tuesday, March 2, 2010, 9:02 PM
>
>
> did you get my post with the schematic ???
>
> gene
>
>
> On Tue, Mar 2, 2010 at 5:59 PM, Howard Nylander <uziyah@yahoo.com> wrote:
>
> > Thanks John and Jim. Will post John privately.
> >
> > Howard Nylander
> >
> > --- On Tue, 3/2/10, Jim Kanomata <jimkanomata@gmail.com> wrote:
> >
> >
> > From: Jim Kanomata <jimkanomata@gmail.com>
> > Subject: Re: [GMCnet] Swingaway Step Co.
> > To: gmclist@temp.gmcnet.org
> > Date: Tuesday, March 2, 2010, 8:02 PM
> >
> >
> > Ken Rose is the guy to get you the info.
> > I was going to purchase the rights to make the automatic step but
> > there was not enough intrest in them to do it.
> >
> > On Tue, Mar 2, 2010 at 4:49 PM, John Sharpe <johnasharpe@earthlink.net>
> > wrote:
> > >
> > >
> > > Howard, Ken Rose should know :roll: . Send me an offline e-mail and
> > I'll try to hook you up. Jim K may also know. Hope to see you in Bean
> > Station.
> > >
> > >
> > > --
> > > John Sharpe
> > > Humble,TX
> > > '40 Ford Deluxe TBI
> > > '78 Eleganza TBI
> > > '78 Royale TBI
> > > mailto:johnasharpe@earthlink.net
> > > _______________________________________________
> > > GMCnet mailing list
> > > List Information and Subscription Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Jim Kanomata
> > Applied/GMC, Fremont,CA
> > jimk@appliedairfilters.com
> > http://www.appliedgmc.com
> > 1-800-752-7502
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> >
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Glenn Giere, Portland OR, K7GAG '73 "Moby the Motorhome" 26'

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75535 is a reply to message #75533] Wed, 03 March 2010 13:24 Go to previous messageGo to next message
UziYaH is currently offline  UziYaH   United States
Messages: 282
Registered: July 2007
Location: 10-O-C
Karma: 0
Senior Member
Hi Glenn,
 
The schematics are embedded in the pictures Gene sent me at:
 
http://gmcmotorhome.info/projects.html#paper
 
Happy Trails,
 
Howard Nylander
Greeneville, TN
 



--- On Wed, 3/3/10, Glenn Giere <glenngiere@gmail.com> wrote:


From: Glenn Giere <glenngiere@gmail.com>
Subject: Re: [GMCnet] Swingaway Step Co.
To: gmclist@temp.gmcnet.org
Date: Wednesday, March 3, 2010, 2:01 PM


I could use a copy too.  Save me some diddling when I repair mine.  Glenn
Giere

On Wed, Mar 3, 2010 at 8:29 AM, Howard Nylander <uziyah@yahoo.com> wrote:

> Hi Gene,  ...yes, I got the schematic along with other great pictures. Are
> you today's MVP? I think so. Thanks again on my behalf and the other
> requesting the info. Much appreciated.
>
> Howard Nylander
>
>
> --- On Tue, 3/2/10, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
>
>
> From: Mr.erf ERFisher <mr.erfisher@gmail.com>
> Subject: Re: [GMCnet] Swingaway Step Co.
> To: gmclist@temp.gmcnet.org
> Date: Tuesday, March 2, 2010, 9:02 PM
>
>
> did you get my post with the schematic ???
>
> gene
>
>
> On Tue, Mar 2, 2010 at 5:59 PM, Howard Nylander <uziyah@yahoo.com> wrote:
>
> > Thanks John and Jim. Will post John privately.
> >
> > Howard Nylander
> >
> > --- On Tue, 3/2/10, Jim Kanomata <jimkanomata@gmail.com> wrote:
> >
> >
> > From: Jim Kanomata <jimkanomata@gmail.com>
> > Subject: Re: [GMCnet] Swingaway Step Co.
> > To: gmclist@temp.gmcnet.org
> > Date: Tuesday, March 2, 2010, 8:02 PM
> >
> >
> > Ken Rose is the guy to get you the info.
> > I was going to purchase the rights to make the automatic step but
> > there was not enough intrest in them to do it.
> >
> > On Tue, Mar 2, 2010 at 4:49 PM, John Sharpe <johnasharpe@earthlink.net>
> > wrote:
> > >
> > >
> > > Howard,  Ken Rose should know  :roll: . Send me an offline e-mail and
> > I'll try to hook you up.  Jim K may also know.  Hope to see you in Bean
> > Station.
> > >
> > >
> > > --
> > > John Sharpe
> > > Humble,TX
> > > '40 Ford Deluxe TBI
> > > '78 Eleganza TBI
> > > '78 Royale TBI
> > > mailto:johnasharpe@earthlink.net
> > > _______________________________________________
> > > GMCnet mailing list
> > > List Information and Subscription Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Jim Kanomata
> > Applied/GMC, Fremont,CA
> > jimk@appliedairfilters.com
> > http://www.appliedgmc.com
> > 1-800-752-7502
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> >
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist




_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Howard Nylander
Royale Class of "78" "Rocinate"
E-10-o-C

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75546 is a reply to message #75535] Wed, 03 March 2010 15:48 Go to previous messageGo to next message
zhagrieb is currently offline  zhagrieb   United States
Messages: 676
Registered: August 2009
Location: Portland Oregon
Karma: 0
Senior Member
Got it. Many thanks, Glenn

On Wed, Mar 3, 2010 at 11:24 AM, Howard Nylander <uziyah@yahoo.com> wrote:

> Hi Glenn,
>
> The schematics are embedded in the pictures Gene sent me at:
>
> http://gmcmotorhome.info/projects.html#paper
>
> Happy Trails,
>
> Howard Nylander
> Greeneville, TN
>
>
>
>
> --- On Wed, 3/3/10, Glenn Giere <glenngiere@gmail.com> wrote:
>
>
> From: Glenn Giere <glenngiere@gmail.com>
> Subject: Re: [GMCnet] Swingaway Step Co.
> To: gmclist@temp.gmcnet.org
> Date: Wednesday, March 3, 2010, 2:01 PM
>
>
> I could use a copy too. Save me some diddling when I repair mine. Glenn
> Giere
>
> On Wed, Mar 3, 2010 at 8:29 AM, Howard Nylander <uziyah@yahoo.com> wrote:
>
> > Hi Gene, ...yes, I got the schematic along with other great pictures.
> Are
> > you today's MVP? I think so. Thanks again on my behalf and the other
> > requesting the info. Much appreciated.
> >
> > Howard Nylander
> >
> >
> > --- On Tue, 3/2/10, Mr.erf ERFisher <mr.erfisher@gmail.com> wrote:
> >
> >
> > From: Mr.erf ERFisher <mr.erfisher@gmail.com>
> > Subject: Re: [GMCnet] Swingaway Step Co.
> > To: gmclist@temp.gmcnet.org
> > Date: Tuesday, March 2, 2010, 9:02 PM
> >
> >
> > did you get my post with the schematic ???
> >
> > gene
> >
> >
> > On Tue, Mar 2, 2010 at 5:59 PM, Howard Nylander <uziyah@yahoo.com>
> wrote:
> >
> > > Thanks John and Jim. Will post John privately.
> > >
> > > Howard Nylander
> > >
> > > --- On Tue, 3/2/10, Jim Kanomata <jimkanomata@gmail.com> wrote:
> > >
> > >
> > > From: Jim Kanomata <jimkanomata@gmail.com>
> > > Subject: Re: [GMCnet] Swingaway Step Co.
> > > To: gmclist@temp.gmcnet.org
> > > Date: Tuesday, March 2, 2010, 8:02 PM
> > >
> > >
> > > Ken Rose is the guy to get you the info.
> > > I was going to purchase the rights to make the automatic step but
> > > there was not enough intrest in them to do it.
> > >
> > > On Tue, Mar 2, 2010 at 4:49 PM, John Sharpe <johnasharpe@earthlink.net
> >
> > > wrote:
> > > >
> > > >
> > > > Howard, Ken Rose should know :roll: . Send me an offline e-mail and
> > > I'll try to hook you up. Jim K may also know. Hope to see you in Bean
> > > Station.
> > > >
> > > >
> > > > --
> > > > John Sharpe
> > > > Humble,TX
> > > > '40 Ford Deluxe TBI
> > > > '78 Eleganza TBI
> > > > '78 Royale TBI
> > > > mailto:johnasharpe@earthlink.net
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > List Information and Subscription Options:
> > > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > > >
> > >
> > >
> > >
> > > --
> > > Jim Kanomata
> > > Applied/GMC, Fremont,CA
> > > jimk@appliedairfilters.com
> > > http://www.appliedgmc.com
> > > 1-800-752-7502
> > > _______________________________________________
> > > GMCnet mailing list
> > > List Information and Subscription Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > List Information and Subscription Options:
> > > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> > >
> >
> >
> >
> > --
> > Gene Fisher -- 74-23,77PB/ore/ca
> > “Give a man a fish; you have fed him for today --- give him a URL and
> > -------
> > http://gmcmotorhome.info/
> > Alternator Protection Cable
> > http://gmcmotorhome.info/APC.html
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> >
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > List Information and Subscription Options:
> > http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
> >
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Glenn Giere, Portland OR, K7GAG '73 "Moby the Motorhome" 26'

Report message to a moderator

Re: [GMCnet] Swingaway Step Co. [message #75566 is a reply to message #75546] Wed, 03 March 2010 18:17 Go to previous message
GMCWiperMan is currently offline  GMCWiperMan   United States
Messages: 1248
Registered: December 2007
Karma: 1
Senior Member
I don't know whether that's the Ken Rose design, but if it is, don't be
surprised if your wiring does not match the diagram. He told me several
years ago that he'd had someone design a microprocessor control to replace
the micro switches. I think it was just working on time rather than actual
step position, as with the switches.

Ken H.

On Wed, Mar 3, 2010 at 11:24 AM, Howard Nylander <uziyah@yahoo.com> wrote:

>
> > Hi Glenn,
> >
> > The schematics are embedded in the pictures Gene sent me at:
> >
> > http://gmcmotorhome.info/projects.html#paper
> >
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic: [GMCnet] Best laid plans, page six, epilog……….
Next Topic: [GMCnet] Pig at Montgomery
Goto Forum:
  


Current Time: Sat Sep 21 08:45:28 CDT 2024

Total time taken to generate the page: 0.01123 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software