GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] Gentron 3500 watt Pro-2 RV
Re: [GMCnet] Gentron 3500 watt Pro-2 RV [message #72728] Wed, 03 February 2010 14:41 Go to previous message
Gary Cottingame is currently offline  Gary Cottingame   United States
Messages: 85
Registered: January 2005
Karma:
Member
Ken

Do you have pictures of the Troybilt installation. Your post sounds very interesting.

Thanks

Gary
73 26 CL
TZE21
Denisonm Tx

Gary L. Cottingame
Independent Associate
Prepaid Legal Services
903-890-0102

 












 
 
 
 
 


--- On Tue, 2/2/10, Ken Henderson <ken0henderson@gmail.com> wrote:


From: Ken Henderson <ken0henderson@gmail.com>
Subject: Re: [GMCnet] Gentron 3500 watt Pro-2 RV
To: "gmclist" <gmclist@temp.gmcnet.org>
Date: Tuesday, February 2, 2010, 8:03 AM


Jim,

I sure sympathize with you about doing a new install of an unknown
generator.  As you may have caught here, I recently installed a TroyBilt
portable in the 23', replacing the 3+ year old, totally unsatisfactory
Generac 36G.  You would have lost your shirt on the installation of that
$700 unit:  First I had to convert it from 120/240 vac output to straight
120 with no documentation nor assistance from the factory, voiding the
warranty right off the bat.  Then a method for remote control had to be
devised, as well as adaptation to the existing control circuit in the coach.
Finally came design and fabrication of the mounting brackets and slide
mechanism (including a false start with undersized ball bearing slides).
Exhaust plumbing was something of a nightmare which required extensive
research to find a usable muffler -- and which still leaves me with a
non-Forest Service approved system.  I'm now happy with the installation,
but I still have a fuel supply problems, correction of which has been
interrupted by my 455 problem.  And I've done nothing about an automatic
choke, since the climate here doesn't seem to require one.  I can't give an
accurate estimate of the hours I've invested, but they're far more than you
could have economically devoted -- my labor rate would not come near keeping
food on your table, much less pay the rent & light bill. :-)

Ken H.
Americus, GA
'76 X-Birchaven
www.gmcwipersetc.com


On Tue, Feb 2, 2010 at 8:43 AM, Jim Bounds <gmccoop@yahoo.com> wrote:

> Bob,
>
> I am presently battling the industry trying to find an overseas (I'm using
> that expression kindly) generator to use in our application.  Specifications
> on these units and their capability seem to be a bit on the overrated side.
>
> Recently I bit and installed one of these portable self contained 3000 watt
> generators (not that one but one I felt better about than a $500 unit) and
> found it did not like a piston driven 13.5000 BTU roof AC unit.  it would
> run a rotary compressor unit fine but it barely adequite....
>


> Jim Bounds
> --------------------
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Broke down...................
Next Topic: [GMCnet] Just for Ken B!
Goto Forum:
  


Current Time: Fri Sep 27 06:27:48 CDT 2024

Total time taken to generate the page: 0.00921 seconds