Genset compartment dimensions [message #72431] |
Sun, 31 January 2010 21:57 |
Luvn737s
Messages: 1106 Registered: June 2007
Karma: 2
|
Senior Member |
|
|
Does anyone have the dimensions for the genset compartment at their fingertips? I have to drive a little while to get to mine and thought I'd try asking here first.
Any experience with an Onan Emerald unit?
Randy
1973 26' Painted Desert
Ahwatukee (Phoenix) AZ
|
|
|
|
Re: Genset compartment dimensions [message #72509 is a reply to message #72431] |
Mon, 01 February 2010 16:55 |
GeorgeRud
Messages: 1380 Registered: February 2007 Location: Chicago, IL
Karma: 0
|
Senior Member |
|
|
When I measured my 26ft Palm Beach, the generator compartment was about 17" tall, 28" deep, and 40" wide. You have to take into account the house batteries are also in that space, but the generator part is about 25" wide. Of course, if you decide to leave the slide-drawer in, that will affect all the above measurements, but all the current generators are made to be serviceable from the front (that I've seen) I fit a Prime-pact 50 in with very minor modifications (just had to make some brackets and grind the lip from the aluminum floor rails).
George Rudawsky
Chicago, IL
75 Palm Beach
|
|
|