GMCforum: GMCnet » Porkchop Klocking

Home » Public Forums » GMCnet » Porkchop Klocking

Show: Today's Messages :: Polls :: Message Navigator

Porkchop Klocking [message #72288]

Sat, 30 January 2010 18:24

g.winger

Messages: 792
Registered: February 2008
Location: Warrenton,Missouri

Karma:

Senior Member

Its been awhile, got the torsion bars back in, but, after I put my tool on and started crankin ,I got it about half way and I still had a long,long way to go. So,,,before I crank on them at all the ends are about 2.25 or 2.5 inches down. OR looking from the rear of the drivers side about 3:30 or so. Put them in 1/6th of a turn higher but they are really high. I wrote down how I removed them and lost my notes. Left and Right marks go to the rear,,Yes?? Thanks,,,,PL.

Report message to a moderator

[Message index]

		Porkchop Klocking By: g.winger on Sat, 30 January 2010 18:24
		Re: [GMCnet] Porkchop Klocking By: USAussie on Sat, 30 January 2010 19:20
		Re: [GMCnet] Porkchop Klocking By: GMCWiperMan on Sat, 30 January 2010 19:55
		Re: [GMCnet] Porkchop Klocking By: Steven Ferguson on Sat, 30 January 2010 21:13
		Re: [GMCnet] Porkchop Klocking By: USAussie on Sun, 31 January 2010 04:26
		Re: [GMCnet] Porkchop Klocking By: Steven Ferguson on Sun, 31 January 2010 05:02
		Re: [GMCnet] Porkchop Klocking By: GMCWiperMan on Sun, 31 January 2010 08:54
		Re: [GMCnet] Porkchop Klocking By: Bob de Kruyff on Sat, 06 February 2010 21:12
		Re: [GMCnet] Porkchop Klocking By: GMCWiperMan on Sat, 06 February 2010 21:20
		Re: [GMCnet] Porkchop Klocking By: USAussie on Sat, 06 February 2010 21:24
		Re: [GMCnet] Porkchop Klocking By: Charles on Sat, 06 February 2010 21:26

Previous Topic:	Cad 500 and dash heater
Next Topic:	Re: [GMCnet] Porkchop Klocking

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 22 04:27:19 CDT 2024

Total time taken to generate the page: 0.03889 seconds