GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Frame Rails and other parts for sale
[GMCnet] Frame Rails and other parts for sale [message #71028] Sun, 17 January 2010 10:16 Go to next message
Marcus McGee is currently offline  Marcus McGee   United States
Messages: 112
Registered: March 2004
Karma: 0
Senior Member
Finally got the EBay Palm Beach torn down to the last bits.

I need to move some of the bits of the carcass out to make room in my shop.

Here is a quick list off the top of my head.

Frame Rails - the main ones both left and right - excellent shape with only some surface rust solid rails. $400 each?

Cross rails - Same condition $75 each

Gas tanks - Solid and very usable as is with senders etc intact condition of the senders unknown $100 each

Grey water tank - Looks solid to me but since I am a pure transmode guy this is the first I have ever seen close up - $50 no guarantee at all

Generator door - decent shape $100

Dash - Entire Dash assembly all out and in good to excellent shape $300 or will part out pieces

Side panels - Driver and passenger side panels. Excellent shape and only 3 small screw holes extra on the drivers one. $75 each

Windows - All windows - small kitchen, front slider, rear slider and small slider all fair condition $???

Entry Door - No window glass $150

Torsion bar pork chops - $75 pair

Torsion Bars = $100 each

Rear Boggies - $250 each

Complete engine dash wiring harness - $125

Rear exterior cap complete - $???

Front Interior cap - $100

Rear Interior cap and base panels $100

And lots of misc. parts - Heater/AC box, tie rods, engine brackets, AC compressor, alternator, rear wheel wells
full rear cap, and other bits and pieces.

I will try to put up picture someplace this week.

If my prices are out of line - either too high or too low let me know. Some of this can be shipped, but the larger parts are PU or arrange for a delivery to a rally or meeting via a GMCer.

Front clip, was sold to Scott Cowden a couple of years ago and rear kick up frame to Bill Farrass last week. I have the original interior that was recovered in a black speckle, but is in low fair condition. Also front suspension was sold.

Marcus McGee
Rochester NY
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Frame Rails and other parts for sale [message #71032 is a reply to message #71028] Sun, 17 January 2010 10:41 Go to previous messageGo to next message
mike miller   United States
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
Senior Member
Marcus McGee wrote on Sun, 17 January 2010 08:16

Finally got the EBay Palm Beach torn down to the last bits.

I need to move some of the bits of the carcass out to make room in my shop.

<< snipped>>

Marcus McGee
Rochester NY


Marcus,

What year was the coach?

While I probably will not be picking up parts from it, (shipping would be a killer!) others might want to know. Some of the parts are different over the years. (Like the dash.) As a Palm Beach, it must be at least a 1975.


Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo' http://m000035.blogspot.com
Re: [GMCnet] Frame Rails and other parts for sale 76 Palm Beach [message #71033 is a reply to message #71032] Sun, 17 January 2010 11:32 Go to previous messageGo to next message
Marcus McGee is currently offline  Marcus McGee   United States
Messages: 112
Registered: March 2004
Karma: 0
Senior Member
It is a 1976 Vin# TZE166V101691 76 was written on the ID label in
the dash, and that is what I am going by. I have not decoded the VIN

Marcus

Mike Miller wrote:
> Marcus McGee wrote on Sun, 17 January 2010 08&#58;16
>
>> Finally got the EBay Palm Beach torn down to the last bits.
>>
>> I need to move some of the bits of the carcass out to make room in my shop.
>>
>> << snipped>>
>>
>> Marcus McGee
>> Rochester NY
>>
>
>
> Marcus,
>
> What year was the coach?
>
> While I probably will not be picking up parts from it, (shipping would be a killer!) others might want to know. Some of the parts are different over the years. (Like the dash.) As a Palm Beach, it must be at least a 1975.
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Frame Rails and other parts for sale [message #71052 is a reply to message #71028] Sun, 17 January 2010 15:36 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
Marcus McGee wrote on Sun, 17 January 2010 10:16



Side panels - Driver and passenger side panels. Excellent shape and only 3 small screw holes extra on the drivers one. $75 each




I'd be interested in the side panels. What color are they? Are the controls for the Electro-level in the drivers side panel?
Problem is that I'm out of town and will not be home till about April 1st. If I send you check, can you hold them for me, or send to a friends home...I'd give you the address.

Is the coach you parted out a Royale? What floor plan was it. I need a door for the Propane compartment which is just in front of the entrance door. Any chance you have it?


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: [GMCnet] Frame Rails and other parts for sale [message #71057 is a reply to message #71052] Sun, 17 January 2010 16:31 Go to previous messageGo to next message
Marcus McGee is currently offline  Marcus McGee   United States
Messages: 112
Registered: March 2004
Karma: 0
Senior Member
Larry,

I will have to take a look at the panels. I am not sure if they had the
level controls mounted there or on the dash. As far as the propane door
I think the door was the same no matter where it was mounted, but let me
check.

Marcus


Larry wrote:
> Marcus McGee wrote on Sun, 17 January 2010 10&#58;16
>
>> Side panels - Driver and passenger side panels. Excellent shape and only 3 small screw holes extra on the drivers one. $75 each
>>
>
> I'd be interested in the side panels. What color are they? Are the controls for the Electro-level in the drivers side panel?
> Problem is that I'm out of town and will not be home till about April 1st. If I send you check, can you hold them for me, or send to a friends home...I'd give you the address.
>
> Is the coach you parted out a Royale? What floor plan was it. I need a door for the Propane compartment which is just in front of the entrance door. Any chance you have it?
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Frame Rails and other parts for sale [message #71067 is a reply to message #71057] Sun, 17 January 2010 18:36 Go to previous messageGo to next message
bukzin is currently offline  bukzin   United States
Messages: 840
Registered: April 2004
Location: North California
Karma: 0
Senior Member
I would like the 'dash panel'.

The fake wood looking plastic piece which
surrounds the instruments/gauges.



Thanks!


Bukzin
1977 Palm Beach
Re: [GMCnet] Frame Rails and other parts for sale [message #71069 is a reply to message #71067] Sun, 17 January 2010 18:42 Go to previous messageGo to next message
Chr$ is currently offline  Chr$   United States
Messages: 2690
Registered: January 2004
Location: Scottsdale, AZ
Karma: 1
Senior Member
I am interested in the Generator door, if it has no damage.

Also, is there a water tank fill door above the generator door? looks like a fuel door. Need one of those too. with or without a lock.

Also need a latch assy for the bathroom/closet door. Cannot find one anywhere.

Phone
six oh two - seven five one - two oh seven oh


-Chr$: Perpetual SmartAss
Scottsdale, AZ

77 Ex-Kingsley 455 SOLD!
2010 Nomad 24 Ft TT 390W PV W/MPPT, EV4010 and custom cargo door.
Photosite: Chrisc GMC:"It has Begun" TT: "The Other Woman"
Re: [GMCnet] Frame Rails and other parts for sale [message #71076 is a reply to message #71028] Sun, 17 January 2010 19:27 Go to previous messageGo to next message
Marcus McGee is currently offline  Marcus McGee   United States
Messages: 112
Registered: March 2004
Karma: 0
Senior Member
I also have some 455 engine parts.

1 set of J heads rebuilt 15K ago - $300

2 Sets of C heads for rebuilding - $200 per set

3 Toronado oil pans - $100 each?

2 Sets of rods. Cleaned and shot peened ready to use - make offer

Radiator assembly, but will probably need to be re-cored. $100

If you do not see it listed ask, I may have it and just to over loaded to list all the parts.

Most of the living interior parts like the bathroom latch are gone with the wind.

I will be adding parts as I come across them.


Like I said I am not sure about pricing so if I am off base do not be afraid to get in my face about it. Well be nice, I an sensitive you know.

Marcus

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Frame Rails and other parts for sale [message #71289 is a reply to message #71028] Wed, 20 January 2010 13:52 Go to previous messageGo to next message
Marcus McGee is currently offline  Marcus McGee   United States
Messages: 112
Registered: March 2004
Karma: 0
Senior Member
Got some pictures up of the 76 Palm Beach dash and of the heater/AC box
and seat bases. I will be posting some more of the interior front side
panels and other parts. i also have a full rear exterior cap without
rear window glass I will post some epics but it is up on a shelf so they
are not the best.

Marcus


crsalert@frontiernet.net wrote:
> Finally got the EBay Palm Beach torn down to the last bits.
>
> I need to move some of the bits of the carcass out to make room in my shop.
>
> Here is a quick list off the top of my head.
>
> Frame Rails - the main ones both left and right - excellent shape with only some surface rust solid rails. $400 each?
>
> Cross rails - Same condition $75 each
>
> Gas tanks - Solid and very usable as is with senders etc intact condition of the senders unknown $100 each
>
> Grey water tank - Looks solid to me but since I am a pure transmode guy this is the first I have ever seen close up - $50 no guarantee at all
>
> Generator door - decent shape $100
>
> Dash - Entire Dash assembly all out and in good to excellent shape $300 or will part out pieces
>
> Side panels - Driver and passenger side panels. Excellent shape and only 3 small screw holes extra on the drivers one. $75 each
>
> Windows - All windows - small kitchen, front slider, rear slider and small slider all fair condition $???
>
> Entry Door - No window glass $150
>
> Torsion bar pork chops - $75 pair
>
> Torsion Bars = $100 each
>
> Rear Boggies - $250 each
>
> Complete engine dash wiring harness - $125
>
> Rear exterior cap complete - $???
>
> Front Interior cap - $100
>
> Rear Interior cap and base panels $100
>
> And lots of misc. parts - Heater/AC box, tie rods, engine brackets, AC compressor, alternator, rear wheel wells
> full rear cap, and other bits and pieces.
>
> I will try to put up picture someplace this week.
>
> If my prices are out of line - either too high or too low let me know. Some of this can be shipped, but the larger parts are PU or arrange for a delivery to a rally or meeting via a GMCer.
>
> Front clip, was sold to Scott Cowden a couple of years ago and rear kick up frame to Bill Farrass last week. I have the original interior that was recovered in a black speckle, but is in low fair condition. Also front suspension was sold.
>
> Marcus McGee
> Rochester NY
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Frame Rails and other parts for sale [message #71293 is a reply to message #71289] Wed, 20 January 2010 14:25 Go to previous messageGo to next message
Marcus McGee is currently offline  Marcus McGee   United States
Messages: 112
Registered: March 2004
Karma: 0
Senior Member
Here are the pictures of some of the parts/goodies I have up for sale.
Added a Hess GMC training Van, the interior driver and passenger side
panels, Rear exterior cap, heater box, and seat bases.

http://www.gmcmhphotos.com/photos/showgallery.php?cat=4678

Prices are listed, but make me an offer if you think I am being
unreasonable.

Marcus

Marcus McGee wrote:
> Got some pictures up of the 76 Palm Beach dash and of the heater/AC box
> and seat bases. I will be posting some more of the interior front side
> panels and other parts. i also have a full rear exterior cap without
> rear window glass I will post some epics but it is up on a shelf so they
> are not the best.
>
> Marcus
>
>
> crsalert@frontiernet.net wrote:
>
>> Finally got the EBay Palm Beach torn down to the last bits.
>>
>> I need to move some of the bits of the carcass out to make room in my shop.
>>
>> Here is a quick list off the top of my head.
>>
>> Frame Rails - the main ones both left and right - excellent shape with only some surface rust solid rails. $400 each?
>>
>> Cross rails - Same condition $75 each
>>
>> Gas tanks - Solid and very usable as is with senders etc intact condition of the senders unknown $100 each
>>
>> Grey water tank - Looks solid to me but since I am a pure transmode guy this is the first I have ever seen close up - $50 no guarantee at all
>>
>> Generator door - decent shape $100
>>
>> Dash - Entire Dash assembly all out and in good to excellent shape $300 or will part out pieces
>>
>> Side panels - Driver and passenger side panels. Excellent shape and only 3 small screw holes extra on the drivers one. $75 each
>>
>> Windows - All windows - small kitchen, front slider, rear slider and small slider all fair condition $???
>>
>> Entry Door - No window glass $150
>>
>> Torsion bar pork chops - $75 pair
>>
>> Torsion Bars = $100 each
>>
>> Rear Boggies - $250 each
>>
>> Complete engine dash wiring harness - $125
>>
>> Rear exterior cap complete - $???
>>
>> Front Interior cap - $100
>>
>> Rear Interior cap and base panels $100
>>
>> And lots of misc. parts - Heater/AC box, tie rods, engine brackets, AC compressor, alternator, rear wheel wells
>> full rear cap, and other bits and pieces.
>>
>> I will try to put up picture someplace this week.
>>
>> If my prices are out of line - either too high or too low let me know. Some of this can be shipped, but the larger parts are PU or arrange for a delivery to a rally or meeting via a GMCer.
>>
>> Front clip, was sold to Scott Cowden a couple of years ago and rear kick up frame to Bill Farrass last week. I have the original interior that was recovered in a black speckle, but is in low fair condition. Also front suspension was sold.
>>
>> Marcus McGee
>> Rochester NY
>> _______________________________________________
>> GMCnet mailing list
>> List Information and Subscription Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>>
>>
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Frame Rails and other parts for sale [message #71394 is a reply to message #71028] Thu, 21 January 2010 09:45 Go to previous messageGo to next message
jwillard is currently offline  jwillard   United States
Messages: 118
Registered: May 2004
Location: Silver City, NM
Karma: 0
Senior Member
Hi Marcus,
Those interoir cockpit side panels are the ones I'm looking for. It they won't work for the other person that asked about where the level controls were, I'll take them right away. Let me know off-net and we can arrange shipping and payment etc


Jeff Willard
Silver City, NM
1973 ex-Glacier
Re: [GMCnet] Frame Rails and other parts for sale [message #71537 is a reply to message #71394] Fri, 22 January 2010 13:23 Go to previous message
Marcus McGee is currently offline  Marcus McGee   United States
Messages: 112
Registered: March 2004
Karma: 0
Senior Member
Jeff,

Do you still want the side panels? They are yours if so @140 plus the
shipping.

Marcus
585-271-1154

Jeff Willard wrote:
> Hi Marcus,
> Those interoir cockpit side panels are the ones I'm looking for. It they won't work for the other person that asked about where the level controls were, I'll take them right away. Let me know off-net and we can arrange shipping and payment etc
>
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Previous Topic: [GMCnet] Timken bearings
Next Topic: Weight of Onan 6K with power drawer?
Goto Forum:
  


Current Time: Wed Oct 02 09:19:22 CDT 2024

Total time taken to generate the page: 0.04612 seconds