GMCforum: GMCnet » Blender

Home » Public Forums » GMCnet » Blender (were to find one)

Show: Today's Messages :: Polls :: Message Navigator

Blender [message #67676]

Thu, 17 December 2009 00:36

Russ

Messages: 26
Registered: December 2009
Location: calgary, Alberta, Canada

Karma: 0

Junior Member

OK I KNOW there not available anymore but some one out there has one ,and before I replace my counter top I need to find the stock blender to go right beside the stove # seven 'Jay' and I have been searching for the stock blender for over a year with no luck

Russ/ysr80/1973 canyonlands Calgary Alberta Canada http://www.gmcmhphotos.com/photos/showgallery.php?ppuser=2054&username=ysr80

[Updated on: Thu, 17 December 2009 00:39]

Report message to a moderator

Re: [GMCnet] Blender [message #67678 is a reply to message #67676]

Thu, 17 December 2009 04:20

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

Here are some old resources, have you been through all of these, and are
any of the contacts still good?
http://gmcmotorhome.info/living.html#blender

gene

> OK I KNOW there not available anymore but some one out there has one ,and
> before I replace my counter top I need to find the stock blender to go right
> beside the stove # seven 'Jay' and I have been searching for the stock
> blender for over a yearwith no luck
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Gene Fisher -- 74-23,77PB/ore/ca
�Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Blender [message #67685 is a reply to message #67678]

Thu, 17 December 2009 07:55

Russ

Messages: 26
Registered: December 2009
Location: calgary, Alberta, Canada

Karma: 0

Junior Member

thanks for the web sites but Iv looked throught most or all of them Theres got to be some one out there with one to give away or to sell thanks Russ

Russ/ysr80/1973 canyonlands Calgary Alberta Canada http://www.gmcmhphotos.com/photos/showgallery.php?ppuser=2054&username=ysr80

Report message to a moderator

Re: [GMCnet] Blender [message #67688 is a reply to message #67676]

Thu, 17 December 2009 09:26

powerjon

Messages: 2446
Registered: January 2004

Karma: 5

Senior Member

Russ,
You can still find the original Nutone in counter blender out there.
It has several attachments also. Check with Jeff Sirum or maybe the
Jim's or Michael. One of our club members found a complete older
model. Nutone stopped producing the counter top units in 1999 but
popular demand had brought it back. Although you can find the older
GMC units, a new modern would have less breakdown problems. A newer
version available at:

< http://www.centralvacuumstores.com/kitchen_center.phpsrc=google&kw=nutone+blender&ctt_id=19943534&ctt_adnw=Google&ctt_kw=nutone%20blen der&ctt_ch=ps&ctt_entity=kw&gclid=CJekq7bh3Z4CFQoeDQodXD2lNw
>
or
http://tinyurl.com/yaxjlkb

<http://www.amazon.com/Kitchen-Center-TCC-Built-Blender/dp/B000K9KCAE>
or
http://tinyurl.com/ycv2nsh

http://tinyurl.com/ydh6832

Just do a Google search for Nutone Blender and see what else you can
find.

J.R. Wright
>
>
> OK I KNOW there not available anymore but some one out there has
> one ,and before I replace my counter top I need to find the stock
> blender to go right beside the stove # seven 'Jay' and I have been
> searching for the stock blender for over a yearwith no luck

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan

Report message to a moderator

Re: Blender [message #67694 is a reply to message #67676]

Thu, 17 December 2009 11:13

Michael Bozardt

Messages: 367
Registered: January 2007
Location: College Station, Texas

Karma: 1

Senior Member

I have one from a GMC motorhome. Installs in the counter top, not on top of it. Do not have the glass carafe that goes on top.
Price $40+ shipping..........Michael at GEMRECS

Russ wrote on Thu, 17 December 2009 00:36

Report message to a moderator

Re: [GMCnet] Blender [message #67719 is a reply to message #67676]

Thu, 17 December 2009 16:11

ken

Messages: 19
Registered: March 2006
Location: Colorado

Karma: 0

Junior Member

http://www.amazon.com/dp/B000K9KCAE/ref=asc_df_B000K9KCAE984821?tag=the004-2
0&creative=380333&creativeASIN=B000K9KCAE&linkCode=asn

Ken Morris
Looks like a new age replacement roughly the same size, 56.00 not a bad
price.
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Russ
Sent: Wednesday, December 16, 2009 10:36 PM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Blender

OK I KNOW there not available anymore but some one out there has one ,and
before I replace my counter top I need to find the stock blender to go right
beside the stove # seven 'Jay' and I have been searching for the stock
blender for over a yearwith no luck
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

E-mail message checked by Spyware Doctor (6.1.0.447)
Database version: 6.13930
http://www.pctools.com/en/spyware-doctor-antivirus/

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Ken Ecton
74 23' X-CanyonLands/Duramax
64 Corvette Coupe
29 Ford Tudor/Corvette
Various other drivers Northern Colorado

Report message to a moderator

Re: [GMCnet] Blender [message #67725 is a reply to message #67719]

Thu, 17 December 2009 16:57

storm'n

Messages: 492
Registered: April 2007
Location: Ont. Can

Karma: 0

Senior Member

�� + $260.00 for the power base.

http://www.amazon.com/dp/B000K9KCAE/ref=asc_df_B000K9KCAE984821?tag=the004-2
0&creative=380333&creativeASIN=B000K9KCAE&linkCode=asn

Ken Morris
Looks like a new age replacement roughly the same size, 56.00 not a bad
price.
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Russ
Sent: Wednesday, December 16, 2009 10:36 PM
To: gmclist@temp.gmcnet.org
Subject: [GMCnet] Blender

OK I KNOW there not available anymore but some one out there has one ,and
before I replace my counter top I need to find the stock blender to go right
beside the stove # seven 'Jay' and I have been searching for the stock
blender for over a yearwith no luck
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

E-mail message checked by Spyware Doctor (6.1.0.447)
Database version: 6.13930
http://www.pctools.com/en/spyware-doctor-antivirus/

_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: Blender [message #67861 is a reply to message #67676]

Sun, 20 December 2009 13:59

rowing guy

Messages: 31
Registered: October 2009
Location: Outside Philly

Karma: 0

Member

Don't forget eBay. To save some money on "buy it now" on eBay, you can use Bing shopping cash back.

Check that out here.

http://www.bing.com/shopping/search?q=&mkt=en-US&FORM=BPFD

Scott

One of those Revcon owners...

Report message to a moderator

Previous Topic:	Trip Report
Next Topic:	Re: [GMCnet] Will It Go In Snow?

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 14:41:31 CST 2024

Total time taken to generate the page: 0.01797 seconds