Home » Public Forums » GMCnet » [GMCnet] 1156 LEDs
|
|
|
|
| Re: [GMCnet] 1156 LEDs [message #66362 is a reply to message #66348] |
Wed, 02 December 2009 13:05   |
 |
mike miller
Messages: 3576
Registered: February 2004
Location: Hillsboro, Oregon
Karma: 0
|
Senior Member |
|
|
$1.98 for 1. (shipping)
BUT... any extra are .99 each. (up to 10 total.)
I have never been that impressed with this type of bulb. Compared to the ones I tried, the normal bulbs look brighter. The normal bulbs use the reflectors in the housings... these LED's do not. But they did "work."
Mike Miller -- Hillsboro, OR -- on the Black list
(#2)`78 23' Birchaven Rear Bath -- (#3)`77 23' Birchaven Side Bath
More Sidekicks than GMC's and a late model Malibu called 'Boo'
http://m000035.blogspot.com
|
|
|
|
|
|
| Re: [GMCnet] 1156 LEDs [message #66479 is a reply to message #66351] |
Thu, 03 December 2009 10:14 |
Larry C
Messages: 1168
Registered: July 2004
Location: NE Illinois by the Illino...
Karma: 0
|
Senior Member |
|
|
don't want RED
gene
__________________________________________________
Please explain...
I read that you don't want to mix colors with the lenses. This is because of the color differences and the lens will negate any brightness the led can produce.
in the case of white led, the blue hue will diminish and dull the performance. They said red led for red lense....
NOT SO???
Gatsbys' CRUISER  08-18-04
74 GLACIER X, 260/455-APC-4 Bagg'r
Remflex Manifold gaskets
CampGrounds needed, Add yours to "PLACES" />
http://www.gmceast.com/travel
_
|
|
|
|
|
|
|
|
| Re: [GMCnet] 1156 LEDs [message #66532 is a reply to message #66526] |
Thu, 03 December 2009 19:24 |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
| Robert Mueller wrote on Thu, 03 December 2009 15:20 |
G'day,
There are only 7 LED's in the 1156's pictured; do an eBay search for 1156
(or 1157) and you'll find them with up to 63 LED's!
Obviously the more LED's the higher the cost.
Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
Good day Rob: Maybe not, some of the newer LEDs I have been seeing on big trucks have less # of LEDs but are bigger and put out way more light?? I found a LED flashlight in the road last week, it was small,about 3" long with one LED. It is much brighter than the same size one I have with 21 LEDs?? I showed it to Wally and He seems to think a law officer probably lost it and thinks it cost about $100??
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: [GMCnet] 1156 LEDs [message #66543 is a reply to message #66532] |
Thu, 03 December 2009 19:48 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Chuck,
Good info, it looks like one should ask how many lumens the LED bulbs
produce before you buy them!!!
Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
-----Original Message-----
From: gmclist-bounces@temp.gmcnet.org
[mailto:gmclist-bounces@temp.gmcnet.org] On Behalf Of Charles Boyd
Sent: Friday, 4 December 2009 12:24 PM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] 1156 LEDs
Good day Rob: Maybe not, some of the newer LEDs I have been seeing on big
trucks have less # of LEDs but are bigger and put out way more light?? I
found a LED flashlight in the road last week, it was small,about 3" long
with one LED. It is much brighter than the same size one I have with 21
LEDs?? I showed it to Wally and He seems to think a law officer probably
lost it and thinks it cost about $100??
--
C. Boyd
76 Crestmont by Midas
East Tennessee
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] 1156 LEDs [message #67612 is a reply to message #67588] |
Wed, 16 December 2009 08:15 |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
| jase386 wrote on Wed, 16 December 2009 04:24 |
cboyd,
How did you deal with the difference in the elements for the brake and tail light functions?
|
I`m trying to understand the ?. The truck 4" LED has brake and tail lite function. There is a pigtail that goes with the lite. I soldered the pigtail ground to the 1157 housing, brake and tail lite wires to each contact. Very simple.
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: [GMCnet] 1156 LEDs [message #67618 is a reply to message #67588] |
Wed, 16 December 2009 09:16 |
Steven Ferguson
Messages: 3447
Registered: May 2006
Karma: 0
|
Senior Member |
|
|
I also have all LED clearance lights and they indeed are brighter than
what they replaced. Less hassle too. when it comes to tail and turn
lights, LEDs substitutes still fall short and create a different set
of problems with flasher operation and raise havoc in some computer
controlled autos. Certain Honda Civics (2002?) had halogen type
taillight bulbs and I put them in the GMC behind the late model lenses
and they are brighter and have no effect on the flasher performance.
On Wed, Dec 16, 2009 at 1:24 AM, jase386 <jase386@aol.com> wrote:
>
>
> cboyd, i was thinking of doing the exact same thing.
>
> ive installed LED clearance lights, and my original 1156's in the tail lights are just as bright and the light fills up the Lense. I bought some Red LED 1156's and its a beautiful deep red. The lense does a great job of spreading the light produced, but it appears as a red ball in the center.
>
> I was going to try to find a square or rectangle truck LED that would fit inside, under my factory Lense, and do just what you did with soldering the 1156 base.
>
> How did you deal with the difference in the elements for the brake and tail light functions?
> --
> Donovan
> 1975 Eleganza II (Ellie)
> 72,500 miles
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
| Re: [GMCnet] 1156 LEDs [message #67638 is a reply to message #67627] |
Wed, 16 December 2009 12:44 |
shawnee
Messages: 422
Registered: February 2004
Location: NC
Karma: 0
|
Senior Member |
|
|
| WD0AFQ wrote on Wed, 16 December 2009 12:54 |
I am with you Steve. I love the clearance lights but am still waiting for the tail lights. I do like Gene Dotson's way of installing tail lights though. I also have them in the side marker lights and they look pretty neat. They are little clusters of 5. I will have to monkey with my electronic cruise when I add tail lights. Inside the coach we are fixed up real nice for Quartzsite this winter. Hope to see John's new stuff out there. Was not much there last year that I would spend my money on, and over priced.
Dan
wishing I was in Az. this morning
|
Dan,
When I installed the 4 inch LED tail lights with the pig tails, I just hooked the wires up to the tail lights, direction signals and brake lights and they all have worked for the last 5 years.
Gene Dotson
74 Canyonlands
www.bdub.net/Motorhome_Enhancements New Windows and Aluminum Radiators
|
|
|
|
|
|
| Re: [GMCnet] 1156 LEDs [message #67660 is a reply to message #67639] |
Wed, 16 December 2009 20:36 |
shawnee
Messages: 422
Registered: February 2004
Location: NC
Karma: 0
|
Senior Member |
|
|
| WD0AFQ wrote on Wed, 16 December 2009 13:50 |
Dan,
When I installed the 4 inch LED tail lights with the pig tails, I just hooked the wires up to the tail lights, direction signals and brake lights and they all have worked for the last 5 years.
|
Gene, do you have the Rostra cruise? The book tells how to rewire it for the led lights. Emery also explained it to me. I just hate to mess with it because it works so well as is. It worked the first time I tired it, after I installed it 5 years ago. I don't want to monkey with a working cruise, if that make sense. This was discussed last month but I don't recall whether you have the Rostra or not.
Your's look really nice and I have wanted to do mine since the first time you showed them to me in Evansville. Did not help that you parked right in front of me at Pueblo.
Dan[/quote]
Dan,
I do have the Rostra cruise. I had trouble with it cutting off my first trip but found I had it tied into the wrong switch on the brake. Every time I used the turn signals it cut off. Has worked well ever since. That's the only problem I have had with it.
Gene Dotson
74 Canyonlands
www.bdub.net/Motorhome_Enhancements New Windows and Aluminum Radiators
|
|
|
|
Goto Forum:
Current Time: Sun Nov 17 04:56:57 CST 2024
Total time taken to generate the page: 0.01334 seconds
|
GMCforum
Search
Help
Register
Login
Home
I broke a 1157 bulb and soldered the pigtail for the light to it, plugged it up, put some dum-dum under it and held it on with the stock lens. They probably are not as brite as some, but are much briter than origional. Took about an hour to do both.
