Home » Public Forums » GMCnet » [GMCnet] degree symbols on the keyboard
[GMCnet] degree symbols on the keyboard [message #65933] |
Sun, 29 November 2009 12:29 |
rallymaster
Messages: 662 Registered: February 2004 Location: North Plains, ORYGUN
Karma: -4
|
Senior Member |
|
|
That works well on desktops and the BIG laptops with the numeric keypad.
It's a little more difficult on a smaller laptop. Many of them have a
"Function" key operated keypad. Look closely at the keys near the center
of the keyboard for faint light colored numbers on the edge of the keys.
If you find them, hold down the "Function" key (Usually labeled "Fn") and
the "Alt" key, then type 0162 on the "keypad" for the ¢, or Fn + Alt +
248 for degrees °.
My Toshibas, the emachines, and the old Compaq have the Fn key setup, but
my thinkpads don't.
Some are marked more visibly than the Toshiba, the emachines has the
keypad numbers inside a square, right there on the face of the key.
Have fun ° ¢ ± ø on a Toshiba Tecra laptop
ronc
On Sun, 29 Nov 2009 09:32:40 -0800 "Al Scott" <1buckeye2@wavecable.com>
writes:
> . . wish I knew how to make degree symbols on my keyboard).
>
>
>
> Craig Lechowicz
> '77 Kingsley, Waterford, MI
>
>
-------------------------------------------------------------------------
-------------------
> Here's some info sent in the past by Art Sulenski
> ..........................
>
> If you want a "cent" mark hold down the Alt key and type 0162 on the
> number keypad - then let the Alt key go.
>
> Just my 2¢.
>
> Degrees? Type 248. It's only 58° out here today.
> Plus/minus? Type 241. 3.00 ±.050
>
> There are dozens of others. I find those three the most useful.
>
>
>
> 2¢
>
> Degrees 75°
>
>
>
>
>
Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
On Sun, 29 Nov 2009 09:32:40 -0800 "Al Scott" <1buckeye2@wavecable.com>
writes:
> . . wish I knew how to make degree symbols on my keyboard).
>
>
>
> Craig Lechowicz
> '77 Kingsley, Waterford, MI
>
>
-------------------------------------------------------------------------
-------------------
> Here's some info sent in the past by Art Sulenski
> ..........................
>
> If you want a "cent" mark hold down the Alt key and type 0162 on the
> number keypad - then let the Alt key go.
>
> Just my 2¢.
>
> Degrees? Type 248. It's only 58° out here today.
> Plus/minus? Type 241. 3.00 ±.050
>
> There are dozens of others. I find those three the most useful.
>
>
>
> 2¢
>
> Degrees 75°
>
>
>
>
Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ron & Linda Clark
North Plains, ORYGUN
78 Eleganza II
|
|
|
Re: [GMCnet] degree symbols on the keyboard [message #65939 is a reply to message #65933] |
Sun, 29 November 2009 13:18 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Thank you for the info. I'm learning a lot and als forgetting a lot.
If I do not use it , it's gone.
On Sun, Nov 29, 2009 at 10:29 AM, rallymaster <rallymaster@juno.com> wrote:
>
> That works well on desktops and the BIG laptops with the numeric keypad.
> It's a little more difficult on a smaller laptop. Â Many of them have a
> "Function" key operated keypad. Look closely at the keys near the center
> of the keyboard for faint light colored numbers on the edge of the keys.
> If you find them, hold down the "Function" key (Usually labeled "Fn") and
> the "Alt" key, then type 0162 on the "keypad" for the ¢, or Fn + Alt +
> 248 for degrees °.
>
> My Toshibas, the emachines, and the old Compaq have the Fn key setup, but
> my thinkpads don't.
> Some are marked more visibly than the Toshiba, the emachines has the
> keypad numbers inside a square, right there on the face of the key.
>
> Have fun  °  ¢  ±  ø  on a Toshiba Tecra laptop
>
> ronc
>
>
> On Sun, 29 Nov 2009 09:32:40 -0800 "Al Scott" <1buckeye2@wavecable.com>
> writes:
>> . . wish I knew how to make degree symbols on my keyboard).
>>
>>
>>
>> Craig Lechowicz
>> '77 Kingsley, Waterford, MI
>>
>>
> -------------------------------------------------------------------------
> -------------------
>> Here's some info sent in the past by Art Sulenski
>> ..........................
>>
>> If you want a "cent" mark hold down the Alt key and type 0162 on the
>> number keypad - then let the Alt key go.
>>
>> Just my 2¢.
>>
>> Degrees?  Type 248.   It's only 58° out here today.
>> Plus/minus?  Type 241.   3.00 ±.050
>>
>> There are dozens of others. Â I find those three the most useful.
>>
>>
>>
>> 2¢
>>
>> Degrees  75°
>>
>>
>>
>>
>>
> Ron & Linda Clark
> 1978 Eleganza II
> North Plains, ORYGUN
>
> On Sun, 29 Nov 2009 09:32:40 -0800 "Al Scott" <1buckeye2@wavecable.com>
> writes:
>> . . wish I knew how to make degree symbols on my keyboard).
>>
>>
>>
>> Craig Lechowicz
>> '77 Kingsley, Waterford, MI
>>
>>
> -------------------------------------------------------------------------
> -------------------
>> Here's some info sent in the past by Art Sulenski
>> ..........................
>>
>> If you want a "cent" mark hold down the Alt key and type 0162 on the
>> number keypad - then let the Alt key go.
>>
>> Just my 2¢.
>>
>> Degrees?  Type 248.   It's only 58° out here today.
>> Plus/minus?  Type 241.   3.00 ±.050
>>
>> There are dozens of others. Â I find those three the most useful.
>>
>>
>>
>> 2¢
>>
>> Degrees  75°
>>
>>
>>
>>
>
>
> Ron & Linda Clark
> 1978 Eleganza II
> North Plains, ORYGUN
> _______________________________________________
> GMCnet mailing list
> List Information and Subscription Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] degree symbols on the keyboard [message #65990 is a reply to message #65933] |
Sun, 29 November 2009 18:36 |
|
rallymaster wrote on Sun, 29 November 2009 12:29 |
That works well on desktops and the BIG laptops with the numeric keypad.
It's a little more difficult on a smaller laptop. Many of them have a
"Function" key operated keypad. Look closely at the keys near the center
of the keyboard for faint light colored numbers on the edge of the keys.
If you find them, hold down the "Function" key (Usually labeled "Fn") and
the "Alt" key, then type 0162 on the "keypad" for the ¢, or Fn + Alt +
248 for degrees °.
|
As long as you use the "key pad" numbers, most of these will work. The numbers along the top of the standard key board WILL NOT work. Hold down the Alt key eand enter the numbers using the key pad. On note books and some laptops the key pad is near the middle of the keyboard using special function keys to access them as noted above. Here of some of the special characters available and there codes.
Alt 0162 = ¢
Alt 0169 = ©
Alt 0174 = ®
Alt 0176 = °
Alt 0177 = ±
Alt 0216 = Ø
Actually, there are roughly 127 special symbols available using this coding scheme between 0128 and 0255.
Little Yimmy - W9VUA
75 PB - F260206
Twin Cities, MN
|
|
|
Re: [GMCnet] degree symbols on the keyboard [message #66131 is a reply to message #65990] |
Mon, 30 November 2009 15:56 |
Rick Denney
Messages: 430 Registered: January 2004
Karma: 0
|
Senior Member |
|
|
Jim Melberg writes...
> Actually, there are roughly 127 special symbols available using
> this coding scheme between 0128 and 0255.
Don't assume that these special characters are the same for all fonts
used on the reader's computer. They are not. I get many GMClist
messages with font encoding errors, and I have to guess at their
special characters. Or, some software between their computer and mine
translates it as an HTML special character code and I have all kinds
of weird little numerical codes in the text. Apple computers are bad
about this--their open and close quote symbols are not standard. And
the apostrophe symbols are often not standard.
When I want to say degrees, I use this symbol: "degrees". Works every
time, and with the ASCII-encoded characters below 128 where all fonts
are the same.
Rick "no stranger to low-level font encoding" Denney
'73 230 Ex-Glacier "Jaws"
Northern Virginia
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
'73 Glacier 230 "Jaws"
|
|
|
Goto Forum:
Current Time: Fri Feb 07 04:20:38 CST 2025
Total time taken to generate the page: 0.01149 seconds
|