| [GMCnet] Control Arm Removal [message #65878] |
Sat, 28 November 2009 17:43  |
George Zhookoff
Messages: 398
Registered: December 2004
Location: Snellville, GA
Karma: 6
|
Senior Member |
|
|
Well I've got the coach on jackstands in the drive way. Trying to pull off the control arms to retrun to Jim K via Steve F.
Everything is loose. I guess I need to pull back axels towards FD indorder to get clearance for the lower ball joint removal?
George Zhookoff
78 EL II
Atlanta, GA
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Control Arm Removal [message #65888 is a reply to message #65878] |
Sat, 28 November 2009 20:08  |
John Sharpe
Messages: 489
Registered: February 2006
Location: Texas
Karma: 1
|
Senior Member |
|
|
| Quote: |
George Zhookoff wrote:
Well I've got the coach on jackstands in the drive way. Trying to pull off the control arms to retrun to Jim K via Steve F.
Everything is loose. I guess I need to pull back axels towards FD indorder to get clearance for the lower ball joint removal?
|
That's right, George. I was actually able to remove the axles from the knuckles while the other end was left attached to the FD. Took a lot of finessing. In the end it may have been just as easy to remove them from the FD. Your mileage may vary. 
John Sharpe
Humble,TX
'78 Eleganza TBI
'89 Spectrum 2000 MPI V-10
'40 Ford Panel Delivery TPI
johnasharpe@gmail.com
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
