GMCforum: GMCnet » [GMCnet] Interesting Projects

Home » Public Forums » GMCnet » [GMCnet] Interesting Projects

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Interesting Projects [message #65428]

Mon, 23 November 2009 21:03

n6mon

Messages: 421
Registered: January 2004
Location: San Lorenzo, CA

Karma:

Senior Member

A couple of months ago, someone posted a link to a computer controlled
ignition system
from the magazine (e-zine) Everyday Practical Electronics. The magazine
interested me
enough to subscribe. In the December issuse, there are 2 projects
relevant to the greater
GMC community.

The first is for a circuit board to interface between a knock sensor and
the ignition module
(or fuel injection computer).

The other is for a 3D printer (like the one that Leno has) that we all
drooled over. The
difference is that this one is a kit and can be (alledgely) built for
about $1500-160.
It is called the Rapman (reprap.org). Kits and parts are available from:
http://store.makerbot.com/cupcake-cnc/cupcake-cnc-basic.html
http://www.bitsfrombytes.com/
The machines use rolls of wire-like plastic.

There is FREE software to use to create 3D items.
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Terry Taylor
'74 ex-Eleganza SE
San Lorenzo, CA
http://www.n6mon.org
http://dldesignstore.com

Report message to a moderator

[Message index]

[GMCnet] Interesting Projects

By: n6mon on Mon, 23 November 2009 21:03

Previous Topic:	HAD A GOOD DAY
Next Topic:	Texas Antique License

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Feb 28 08:59:15 CST 2025

Total time taken to generate the page: 0.01464 seconds