Home » Public Forums » GMCnet » [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip and
[GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip and [message #55396] |
Thu, 03 September 2009 08:57 |
mlincoln
Messages: 107 Registered: August 2006 Location: Salt Lake City
Karma:
|
Senior Member |
|
|
Hello all,
Some quick advice is needed before ordering my weekly fix of parts
from Jim K later today. The Royale is now nicely painted and
mechanically just about done, thanks to agreed value insurance (take
note, Amanda). I need advice on three things:
1. LED clearance lights. I had the old ones removed before the re-
paint; they were leaky, faded, and cruddy. For new lights, is the $17/
per (x 10 lights) for the LED lights compared to $7/per for the
traditional lights worth it? I figure the first time I have to change
a burnt out incandescent light bulb it might be worth it. Is the LED
look pretty OEM and do they work well?
2. I removed the old, grungy rub strips and sealed all the
potentially leaky areas before the re-paint (but I realize it will
still leak somewhere). Jim sells two kinds of rub strips: OEM with
black rubber and plastic silver trim vs. solid black rubber. I like
the chrome 70's look, but I'm told that, on the OEM version, the
chrome sheds the covering clear plastic layer off of the silvery
strips in a year or two. Any experience with either the peeling disco
version or the solid black (in terms of look or durability)?
3. Body pads. I have to admit I haven't looked at these underneath
but have seen them discussed on this list. Should I order a set today
since the GMC is at a shop and it would be easy to have it done?
Mackinaw bridge, here we come (in 2 or 3 weeks I hope).
Best, Mike Lincoln
_______________________________________________
GMCnet mailing list
List Information and Subscription Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Mike
|
|
|
|
|
[GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip and
By: mlincoln on Thu, 03 September 2009 08:57
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: powerjon on Thu, 03 September 2009 14:26
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: comcast on Thu, 03 September 2009 12:44
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: ljdavick on Thu, 03 September 2009 14:58
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: WD0AFQ on Thu, 03 September 2009 15:07
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: tphipps on Fri, 04 September 2009 07:32
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: fred v on Fri, 04 September 2009 07:38
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: mlincoln on Fri, 04 September 2009 08:17
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: mlincoln on Fri, 04 September 2009 09:25
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
|
|
[GMCnet] Front Wheel Bearings
By: GMC_LES on Fri, 23 October 2009 10:04
|
|
|
Re: [GMCnet] Front wheel bearings
|
|
|
Re: [GMCnet] Front wheel bearings
By: USAussie on Thu, 15 April 2010 19:00
|
|
|
Re: [GMCnet] Front wheel bearings
By: jimk on Thu, 15 April 2010 22:16
|
|
|
Re: [GMCnet] Front wheel bearings
|
|
|
Re: [GMCnet] Front wheel bearings
By: USAussie on Fri, 16 April 2010 03:29
|
|
|
Re: [GMCnet] Front wheel bearings
|
|
|
Re: [GMCnet] Front Wheel Bearings
|
|
|
Re: [GMCnet] Front Wheel Bearings
|
|
|
Re: [GMCnet] Front Wheel Bearings
|
|
|
Re: [GMCnet] Front Wheel Bearings
|
|
|
Re: [GMCnet] Front Wheel Bearings
|
|
|
Re: [GMCnet] Front Wheel Bearings
|
|
|
Re: [GMCnet] Front Wheel Bearings
|
|
|
Re: [GMCnet] Front wheel bearings
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: Larry on Fri, 04 September 2009 10:01
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: spumo on Fri, 23 October 2009 14:16
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: spumo on Fri, 23 October 2009 14:19
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: Larry C on Thu, 15 April 2010 17:46
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: Don A on Thu, 15 April 2010 20:05
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
By: powerjon on Thu, 15 April 2010 20:57
|
|
|
Re: [GMCnet] Finishing up the paint/restoration, need advice on clearance lights and side rub strip
|
Goto Forum:
Current Time: Sat Nov 16 19:55:08 CST 2024
Total time taken to generate the page: 0.00982 seconds
|