GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMC Swap Meet » ride height control sensor
ride height control sensor [message #49342] Mon, 13 July 2009 14:13 Go to next message
burnetbulldog is currently offline  burnetbulldog   United States
Messages: 8
Registered: May 2009
Location: United States
Karma: 0
Junior Member
Need a ride height control sensor for a 1978 Eleganza 11 w/ electro level 11 system. This is the box that the control arm is connected to.

Report message to a moderator

Re: ride height control sensor [message #49864 is a reply to message #49342] Sun, 19 July 2009 09:54 Go to previous messageGo to next message
Tin Gerbil is currently offline  Tin Gerbil   United States
Messages: 236
Registered: October 2006
Location: Vancouver Island, B.C.
Karma: 0
Senior Member
Wrong part, not optical.

1974

Gordon '74 Canyon Lands "Tin Gerbil" Vancouver Island, B.C.

[Updated on: Sun, 09 August 2009 16:33]

Report message to a moderator

Re: ride height control sensor [message #49920 is a reply to message #49864] Sun, 19 July 2009 19:49 Go to previous messageGo to next message
JShot is currently offline  JShot   United States
Messages: 485
Registered: October 2006
Location: NW Ohio
Karma: 0
Senior Member
Tin Gerbil wrote on Sun, 19 July 2009 10:54

I have one. $45 plus shipping

Please make sure they are all the same. Mine are off of a 1974


Bubba, Gordon,

The EL II uses an optical sensor unit - I'm pretty sure it's totally different than any of the other years and systems.

John

John Shotwell
Ridgeville Corners, OH
78 Royale Center Kitchen

Report message to a moderator

Re: ride height control sensor [message #50115 is a reply to message #49920] Wed, 22 July 2009 00:14 Go to previous messageGo to next message
Tin Gerbil is currently offline  Tin Gerbil   Canada
Messages: 236
Registered: October 2006
Location: Vancouver Island, B.C.
Karma: 0
Senior Member
Thanks, John

Gordon '74 Canyon Lands "Tin Gerbil" Vancouver Island, B.C.

Report message to a moderator

Re: ride height control sensor [message #50567 is a reply to message #49342] Mon, 27 July 2009 23:03 Go to previous messageGo to next message
John Sharpe is currently offline  John Sharpe   United States
Messages: 489
Registered: February 2006
Location: Texas
Karma: 1
Senior Member
Burnetbulldog, I can supply the sensor. I do not have the arm & link? Will the sensor only work for you?

John Sharpe
Humble,TX
'78 Eleganza TBI
'89 Spectrum 2000 MPI V-10
'40 Ford Panel Delivery TPI
johnasharpe@gmail.com

Report message to a moderator

Re: ride height control sensor [message #50668 is a reply to message #50567] Wed, 29 July 2009 00:01 Go to previous message
John Sharpe is currently offline  John Sharpe   United States
Messages: 489
Registered: February 2006
Location: Texas
Karma: 1
Senior Member
I can usually supply these electronic height sensors for $40 plus shipping. They are used, tested and ready for your bracket and arm. Contact me by PM.

John Sharpe
Humble,TX
'78 Eleganza TBI
'89 Spectrum 2000 MPI V-10
'40 Ford Panel Delivery TPI
johnasharpe@gmail.com

Report message to a moderator

Previous Topic: FS: Lumina wiper arms
Next Topic: 78 Royale kitchen cabinet door
Goto Forum:
  


Current Time: Sat Sep 21 00:39:38 CDT 2024

Total time taken to generate the page: 0.00928 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software