FS: Lumina wiper arms [message #47270] |
Mon, 22 June 2009 21:04 |
LarryInSanDiego
Messages: 336 Registered: September 2006
Karma: 0
|
Senior Member |
|
|
I was one of the folks that bought a pair of Lumina wiper arms from Keith V. Unfortunately, I had already tossed the originals before I was aware I was supposed to knock the knurled inserts out, so I had none to transfer over. I ended up buying the whole shebang from Jim K (with inserts), so I have an extra pair.
Same price I paid for from Keith V: $35 plus shipping. PayPal also accepted. Larry eight-five-eight 349-6472 or lengelbrecht at sandi.net
Larry Engelbrecht
San Diego, CA
'73 26' ex-Glacier
TZE063V100319 03/07/73
[Updated on: Mon, 22 June 2009 21:09] Report message to a moderator
|
|
|
|
|
|
|
|
Re: FS: Lumina wiper arms [message #47960 is a reply to message #47934] |
Mon, 29 June 2009 13:58 |
Wayne
Messages: 106 Registered: August 2004
Karma: 0
|
Senior Member |
|
|
Hi Larry,
Before we go any further on this deal I would like to confirm something.
Are these wipers the same ones that you bought from Keith? Is everything there except the rubber insert? Do they look just like the photo?
Here is the photo that Keith posted:
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29546
If these are the same ones shown in the photos and nothing that can be seen in the photo is missing I will still take them. If not, then you can go to paypal and give me a refund.
If you received paypal payment then you got my address as paypal always has that information on the email that informs you that you received payment.
However here it is again. I will post it here on the net and also send it to your email address.
Wayne Lawrence
15722 Faculty Ave.
Bellflower, Ca 90706
Wayne4@ca.rr.com
562-867-1462
Wayne Lawrence
76 Birchaven
Bellflower CA
w.lawrence@verizon.net
|
|
|
Re: FS: Lumina wiper arms [message #47982 is a reply to message #47960] |
Mon, 29 June 2009 17:10 |
LarryInSanDiego
Messages: 336 Registered: September 2006
Karma: 0
|
Senior Member |
|
|
Yes, they look just like those minus the wiper blade/insert and the knurled metal insert (which interfaces the wiper arm and the wiper spindle, which sticks out forward from the body and engages the arm itself via that knurled insert). I'll post a pic of that knurled insert as well as the arms when I get back later today.
I finally figured out where your e-mails ended up - they were sent to my wife's e-mail (same as our PayPal account so I can see why you sent them there), and not my own. She assumed the e-mails were also sent to me. If you had replied directly to my e-mails, I would have already received them. Hers is engelbrecht6@yahoo.com and mine is lengelbrecht@sandi.net - where I had been sending you e-mails from. I don't get notifications of her incoming e-mails like she does which explains why I assumed you weren't replying.
Larry Engelbrecht
San Diego, CA
'73 26' ex-Glacier
TZE063V100319 03/07/73
[Updated on: Mon, 29 June 2009 17:11] Report message to a moderator
|
|
|
Re: FS: Lumina wiper arms [message #48018 is a reply to message #47982] |
Mon, 29 June 2009 20:26 |
LarryInSanDiego
Messages: 336 Registered: September 2006
Karma: 0
|
Senior Member |
|
|
Wayne wrote on Mon, 29 June 2009 10:58 | Before we go any further on this deal I would like to confirm something.
Are these wipers the same ones that you bought from Keith? Is everything there except the rubber insert? Do they look just like the photo?
|
Arms on the box as received:
Knurled inserts that you need to change out from your existing ones. These are NOT included - I did not get them from Keith V. You need to transfer these from your existing arms as my ad clearly stated:
Check my e-mail address again that I sent from to you on June 23 and today before you posted the above. Also the post right above yours. Please notice it's NOT my PayPal address (my work often blocks/filters a variety of sites, such as craigslist and countless others including PayPal). Also, I included my cell phone number in every correspondence I sent to you (my records show no incoming calls from you either). If you don't want the wiper arms, I'll be more than happy to refund your money and sell them to someone else.
Larry Engelbrecht
San Diego, CA
'73 26' ex-Glacier
TZE063V100319 03/07/73
[Updated on: Mon, 29 June 2009 21:03] Report message to a moderator
|
|
|
Re: FS: Lumina wiper arms [message #48027 is a reply to message #48018] |
Mon, 29 June 2009 21:17 |
Wayne
Messages: 106 Registered: August 2004
Karma: 0
|
Senior Member |
|
|
Hi Larry,
I noticed that the metal pieces that hold the inserts are missing.
I do NOT want them. I am sorry for any trouble on my part.
Please issue me a paypal refund. There will be no paypal fees charged to either one of us (if you use the paypal issue refund option) and we are both back to the same as we were before we started to deal.
Do not use the send money option as we both will be charged a fee. Instead use the issue refund option.
Thanks
Wayne
Wayne Lawrence
76 Birchaven
Bellflower CA
w.lawrence@verizon.net
|
|
|
Re: FS: Lumina wiper arms [message #48193 is a reply to message #48027] |
Wed, 01 July 2009 00:58 |
LarryInSanDiego
Messages: 336 Registered: September 2006
Karma: 0
|
Senior Member |
|
|
I haven't a clue what "metal pieces that hold the inserts are missing" as all I need to do is press in the discussed knurled inserts and blades and it's a done deal, ready to bolt on with a couple of spacer washers as discussed in previous Lumina wiper arm threads.
Either way, full refund was issued this afternoon. See your PM/e-mail for details.
Larry Engelbrecht
San Diego, CA
'73 26' ex-Glacier
TZE063V100319 03/07/73
[Updated on: Wed, 01 July 2009 01:14] Report message to a moderator
|
|
|
|
Re: FS: Lumina wiper arms [message #48373 is a reply to message #47270] |
Fri, 03 July 2009 13:46 |
Firefly
Messages: 98 Registered: May 2008 Location: Augusta, Maine
Karma: 0
|
Member |
|
|
Please consider them sold awaiting payment/shipping details & confirmation.
Mark Scoble, Lunenburg, MA - 1973 23' Palm Beach Stretched to 32' and in residence at the GMC Co-Op in Orlando, FL
|
|
|
Re: FS: Lumina wiper arms [message #48559 is a reply to message #48027] |
Sun, 05 July 2009 16:46 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
I assume you are talking about the wiper blade refills?
It's near impossible to find refils to fit wiperblades unless you know what company made the current wiper blades.
I've spent hours trying different refills for blades and have given up. sometimes they work, often they don't.
It's easier to just buy the blade, they just snap on.
Next time I have a set of arms to sell they will come with good blades. More expensive, but it will save a bunch of hassle for everyone.
Wayne wrote on Mon, 29 June 2009 21:17 | Hi Larry,
I noticed that the metal pieces that hold the inserts are missing.
I do NOT want them. I am sorry for any trouble on my part.
Please issue me a paypal refund. There will be no paypal fees charged to either one of us (if you use the paypal issue refund option) and we are both back to the same as we were before we started to deal.
Do not use the send money option as we both will be charged a fee. Instead use the issue refund option.
Thanks
Wayne
|
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
|
Re: Alcoas [message #49040 is a reply to message #49013] |
Fri, 10 July 2009 10:19 |
steve n
Messages: 79 Registered: July 2007
Karma: 0
|
Member |
|
|
I like to buy them - any idea as to what the shipping to the Chicago suburban area would cost??
Steve Nowak
F26083
'78 Royale Center Kitchen
TZE368V101877
|
|
|
|
Re: Alcoas [message #50667 is a reply to message #49863] |
Tue, 28 July 2009 23:57 |
John Sharpe
Messages: 489 Registered: February 2006 Location: Texas
Karma: 1
|
Senior Member |
|
|
I have some of these used APV arms tapered for the GMC cones available for $35 pr. You do the cosmetics. If you want new 24" blades they will be $20 pr. Contact me by PM.
John Sharpe
Humble,TX
'78 Eleganza TBI
'89 Spectrum 2000 MPI V-10
'40 Ford Panel Delivery TPI
johnasharpe@gmail.com
|
|
|