[GMCnet] Alcoa Wheels [message #37632] |
Wed, 11 March 2009 07:54 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
G’day,
As I understand it the correct part number Alcoa wheels for the GMC is
160231. They also make a part number 160232 which are rear dually wheels.
Differences:
1) 160231 convex side polished - 160232 concave side polished
2) 160231 valve stem faces convex side - 160232 valve stem faces concave
side
Questions:
Does anybody know if the 160231 and 160232 are dimensionally the same?
Are the 160232 dually wheels hub centered and is the bore the same as the
160231?
You're wondering why I'm asking, well here Downunder the chances of finding
an Alcoa for a GMC is slim to none; whereas we might stumble on some dually
wheels!
Regards,
Rob Mueller
Sydney, Australia
AUS '75 Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
_______________________________________________
GMCnet mailing list
Gmclist@temp.gmcnet.org
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
Re: [GMCnet] Alcoa Wheels [message #37635 is a reply to message #37632] |
Wed, 11 March 2009 08:34 |
Jim Bounds
Messages: 842 Registered: January 2004
Karma: 0
|
Senior Member |
|
|
Rob,
The 1602-31 rim is a "front" dually rim. The 232 is a rear rim. Ask them for 6 front Alcoa rims and they might have it, the number for the classics (the only one they still make) is the 1602-31. You will also need to buy the special lug nuts (139987), the lug covers (SP03) and the center cap (1602). I don't run the center caps, I have seem them rattle and come off, they do look nice thought.
Jim Bounds
----------------------
----- Original Message ----
From: Rob Mueller <robmueller@iinet.net.au>
To: gmclist@temp.gmcnet.org
Sent: Wednesday, March 11, 2009 8:54:29 AM
Subject: [GMCnet] Alcoa Wheels
G’day,
As I understand it the correct part number Alcoa wheels for the GMC is
160231. They also make a part number 160232 which are rear dually wheels.
Differences:
1) 160231 convex side polished - 160232 concave side polished
2) 160231 valve stem faces convex side - 160232 valve stem faces concave
side
Questions:
Does anybody know if the 160231 and 160232 are dimensionally the same?
Are the 160232 dually wheels hub centered and is the bore the same as the
160231?
You're wondering why I'm asking, well here Downunder the chances of finding
an Alcoa for a GMC is slim to none; whereas we might stumble on some dually
wheels!
Regards,
Rob Mueller
Sydney, Australia
AUS '75Â Avion-The Blue Streak TZE365V100428
USA '75 Avion-Double Trouble TZE365V100426
_______________________________________________
GMCnet mailing list
Gmclist@temp.gmcnet.org
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Gmclist@temp.gmcnet.org
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
Re: [GMCnet] Alcoa Wheels [message #64985 is a reply to message #37632] |
Thu, 19 November 2009 21:12 |
Bob de Kruyff
Messages: 4260 Registered: January 2004 Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
""Are the 160232 dually wheels hub centered and is the bore the same as the
160231?""
Yes and Yes
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
|
|
Re: [GMCnet] Alcoa Wheels [message #158236 is a reply to message #158234] |
Fri, 27 January 2012 20:44 |
peter bailey
Messages: 367 Registered: March 2009 Location: Gawler, South Australia
Karma: 0
|
Senior Member |
|
|
Dan,
How did you work out that those numbers were the ones that Keith Lee was
trying to compare as they are not the numbers he entered?
His numbers had me confused.
Peter Bailey
from Ozy (Aussie)
----- Original Message -----
From: <enate98690@mypacks.net>
To: <gmclist@temp.gmcnet.org>
Sent: Saturday, January 28, 2012 12:44 PM
Subject: Re: [GMCnet] Alcoa Wheels
>
> Hi Dan,
> The 160231 Alcoa wheel is polished on what is commonly viewed as the
> outside. The 160232 Alcoa wheel is identical to the 160231 except it is
> polished on the opposite side for "dually" wheel applications.
>
> Unfortunately, I have not run across a 160201 Alcoa wheel as related to
> GMCs.
>
> This article is quite helpful with respect to Alcoa wheel information
> related to GMC. I hope this helps:
>
> www.gmcmotorhome.com/tech/alcoa_wheels/index.html
>
>
>
> Keith Lee
> -----Original Message-----
>>From: gmcnet@dwinchester.com <gmcnet@dwinchester.com>
>>Sent: Jan 27, 2012 5:36 PM
>>To: GMC Net <gmclist@temp.gmcnet.org>
>>Subject: [GMCnet] Alcoa Wheels
>>
>>Can someone tell me the difference between alcoa 160231 and 160201 wheels
>>
>>Dan www.dwinchester.com Sent from my HTC
>>_______________________________________________
>>GMCnet mailing list
>>Unsubscribe or Change List Options:
>>http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1901 / Virus Database: 2109/4771 - Release Date: 01/27/12
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|