GMCforum: GMCnet » Water pump pulley

Home » Public Forums » GMCnet » Water pump pulley

Show: Today's Messages :: Polls :: Message Navigator

Water pump pulley [message #371520]

Thu, 09 November 2023 00:37

fitzmorrispr

Messages: 137
Registered: February 2013
Location: Los Angeles

Karma: 0

Senior Member

Hi guys, just wondering what the right part number is for the original water pump pulley, on a 73. I'm not sure where mine got to while the motor was out.

I found a few, by searching for oldsmobile 455 water pump pulley, the first looks like the best deal:

1. https://www.ebay.com/itm/166385557336 (lists: GM pns 399404 and 409807, stamped codes KK, KF, KO, and KN)

2. https://www.inlinetube.com/products/inl14688 (stamped code KK, looks same as 3 and 4)

3. https://www.oldsparts.com/product/water-pump-pulley-ac-1968-73-cutlass442-3-groove-water-pump-pulley-with-ac-fits-all-350-400-455-motors-and-w30-w31-h urst-olds-has-3-grooves-with-a-5-34-diameter-sold-individually/

4. https://www.opgi.com/engines-components/belts-pulleys/1968-72-3-groove-water-pump-pulley/pulley-water-pump-1968-72-cutlass-3-groove-code-kk-c241594.ht ml

The Greatfruit: 1973, 26', Canyon Lands or Painted Desert, in Pineapple Yellow

Report message to a moderator

Re: Water pump pulley [message #371523 is a reply to message #371520]

Wed, 15 November 2023 18:47

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

I did not answer when you originally posted this because I would just be guessing but it looks like any of those 3 groove pulleys would work.

Ken B.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Previous Topic:	new gas gauge sender
Next Topic:	p30 master cylinder

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 19 08:06:13 CDT 2025

Total time taken to generate the page: 0.01265 seconds