GMCforum: GMCnet » new gas gauge sender

Home » Public Forums » GMCnet » new gas gauge sender

Show: Today's Messages :: Polls :: Message Navigator

new gas gauge sender [message #371482]

Mon, 11 September 2023 11:07

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

I just replaced the fuel pump/filter/sender on my daughter's Kia Soul. The gauge sender is on the side, and looks like if it can be made to fit the GMC insert in the tank, its swing will be just about what's needed. When I get around to mine I'll put up some pics. This for a 2010 to 213 Kia Soul and some other Kias of that vintage. Also if someone needs a good used but working pump/filter/ass'y for a Kia let me know. Be aware, it's worked for 180K miles, no idea how many more are there.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

[Updated on: Mon, 11 September 2023 11:10]

Report message to a moderator

Re: new gas gauge sender [message #371519 is a reply to message #371482]

Wed, 08 November 2023 20:14

rickmike

Messages: 252
Registered: September 2011
Location: United States

Karma: 0

Senior Member

I could test fit it to my extra OEM tank if you would like.

Rick M.

1974 26' Canyonlands aka "The General" Clinton, TN

Report message to a moderator

Re: new gas gauge sender [message #371521 is a reply to message #371482]

Thu, 09 November 2023 06:44

RF_Burns

Messages: 2278
Registered: June 2008
Location: S. Ontario, Canada

Karma: 3

Senior Member

Johnny,
I looked up the specs under a 2012 Kia Soul 2.0L.

One replacement showed the sender resistance as 200-8 ohms so that will mess with the gauge readings. I'm not sure if there are modules that can adapt various senders and gauge resistances.

Also its for fuel injection so the fuel pressure is in the 70PSI range. It would need a pressure regulator to bring that way down for the Q-jet.

Rockauto also suggests to keep fuel levels above 1/4 tank level for pump cooling. I've never seen that recommendation before, but makes sense.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

Re: new gas gauge sender [message #371522 is a reply to message #371482]

Thu, 09 November 2023 07:28

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

I wouldn't use the pump on a gmc, just the sender. And although you could pad it to make 90 ohms it wouldn't track. Another good idea down the tubes Sad

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Previous Topic:	Cad 500 backfire through TB
Next Topic:	Water pump pulley

Goto Forum:

-=] Back to Top [=-

Current Time: Mon May 19 11:34:34 CDT 2025

Total time taken to generate the page: 0.02361 seconds