GMCforum: GMCnet » A/C Expansion valve Location and Flushing

Home » Public Forums » GMCnet » A/C Expansion valve Location and Flushing

Show: Today's Messages :: Polls :: Message Navigator

A/C Expansion valve Location and Flushing [message #370034]

Sat, 25 June 2022 22:48

Tom Katzenberger

Messages: 399
Registered: June 2019
Location: Kingsville, MD

Karma:

Senior Member

Good evening Gentleman,

When flushing the condenser and evaporator, do I need to remove an expansion valve? I flushed the complete system, Installed a new accumulator/dryer and drained the Sandin air compressor, but could not find such a valve .

If need be, I would like to replace the expansion valve before I install the new PAG oil and refrigerant.

What are thoughts on if there was any harm done to the existing expansion valve or if I need to get a new one?

Thanks in advance,
Tom K.

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

Report message to a moderator

[Message index]

		A/C Expansion valve Location and Flushing By: Tom Katzenberger on Sat, 25 June 2022 22:48
		Re: A/C Expansion valve Location and Flushing By: rjw on Sun, 26 June 2022 08:16
		Re: A/C Expansion valve Location and Flushing By: Tom Katzenberger on Mon, 27 June 2022 14:14
		Re: A/C Expansion valve Location and Flushing By: Ken Burton on Mon, 27 June 2022 17:24
		Re: A/C Expansion valve Location and Flushing By: Tom Katzenberger on Tue, 28 June 2022 05:57

Previous Topic:	Duracool Dash AC
Next Topic:	New radiator install

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 27 17:14:45 CDT 2024

Total time taken to generate the page: 0.00917 seconds