Re: Onan Starter won't Disengage [message #369906 is a reply to message #369902] |
Thu, 09 June 2022 07:24 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to previous message](/GMCforum/theme/default/images/down.png) |
Bruce Hart
![United States United States](/GMCforum/images/flags/us.png) Messages: 1500 Registered: October 2011 Location: La Grange, Wyoming
Karma:
|
Senior Member |
|
|
Removed sheet metal, flywheel and cycled starter drive. Gear cycled in and out with out and any hesitation. Had a bad wear pattern on starter gear so I replaced the starter with a spare I had. Primed carb and fired Onan up. Shut Onan off and tried to restart but had a drag on flywheel and starter would only rotate flywheel a halve revolution before stopping. Checked house battery and got 13.7 volts (plugged into house circuit). I will remove starter and check brushes and clean up the guts and lub bendix drive.
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|