| [GMCnet] Re: A/C Belt chirps when compressor first engages [message #369589 is a reply to message #369582] |
Sun, 01 May 2022 10:22   |
powwerjon
Messages: 849
Registered: March 2013
Karma:
|
Senior Member |
|
|
I see that no one has replied to your email on your belt chirping on AC
pull in.
There is not necessarily one answer to your question.
1. Tired streated belt, glazed belt. Belt dressing can sometimes help, but
not necessarily for long.
2. Using one of the "NEW" metric 10MM belts or sometimes 3/8" can be the
only one available and all suppliers swear they will work. "SPOILER ALERT"
they don't! The original belts were 1/2" (13MM) wide and rode correctly in
the AC pulley.and crank pulley.
3. If you can find a Goodyear "Gatorback" or a Kelly Springfield and they
are 11+MM wide. Take a 10MM open end wrench to check the width. If the
10MM wrench fits over the belt then it will not work for long.
4. I rarely buy locally and get most belts online. vbeltsupply.com
5. For an Alternator belt I use an A56 belt (13MM) from NAPA or Farm and
Fleet. Some of the AutoZone Duralast belts are 11.176MM wide for other
belt locations. Check, Check, Measure and Measure!!!!!!
J.R. Wright
GMC Great Laker
GMCGL Tech Editor
GMC Eastern States
GMCMHI
TZE Zone Restorations
78 Buskirk Custom 29.5' Stretch
75 Avion (Under going Frame up Restoration)
On Sat, Apr 30, 2022 at 8:45 AM jhbridges--- via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Aha!
>
> --johnny
> --
> Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> I forgive them all, save those who hurt the dogs. They must answer to me
> in hell
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
