[GMCnet] Re: MicroLevel 2 [message #369335] |
Fri, 01 April 2022 09:37 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma:
|
Senior Member |
|
|
Ive looked into putting into more height positions but it really adds complexity and I'm not convinced it's necessary, just hit the up button and let it either go all the way up or just count to 3.
As far as air bag pressures, why not just add that gauge and pressure sensors, there's no need for microlevel to be in-between that, and no need to mess with an app.
But I will look into it and see if there is an easy way to solve it.
The ride height indicator might be a good idea, there are currently 4 LED indicators showing which valves are on, so if you are in travel mode and no valves are on it's at ride height. but it's not that obvious....Hmmmm
That and other indicators might not be a bad idea, but isn't that what the telltale lights are for?
as far compressors, the EL2 system is a terrible design. Those 2 tiny compressors are ridiculously small. A good design is 1 big compressor and a small tank. the Viair 450 or 485 is perfect, a 1 gallon tank is good.
no air lines go to the controller, just to the valve block.
All calibration data is stored in non volatile flash and will survive power loss for like 10,000 years 🙂
I've sold quite a few units >10 <100 with very few issues, most issues are installation issues.
There's no reason a GMC shop couldn't do the install, the coop was involved in one and I'd be happy to work with them
________________________________
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|