GMCforum: GMCnet » Tilt Steering column universal joint worn

Home » Public Forums » GMCnet » Tilt Steering column universal joint worn (Hopefully this is the last of my steering play issues)

Show: Today's Messages :: Polls :: Message Navigator

Tilt Steering column universal joint worn [message #368784]

Wed, 16 February 2022 08:36

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma: 3

Senior Member

Hopefully this is the last of my steering play issues.

There is a universal joint inside the steering column where it tilts. The universal joint has a spring loaded split plastic sphere which is worn in mine (see link to YouTube video below).

The sphere kit is cheap at $10 bucks from Rockauto. The current part number is ACDelco 26026564. The kit seems to have an upgraded spring assembly design over the original.

I also installed a new ignition key lock tumbler ACDelco D1402B @$22 and the ignition switch rack and gear assembly kit Dorman 83211 at $10 bucks from Rockauto as well.

For the steering column disassembly instructions, google "steering-column-rebuild.pdf"

https://youtu.be/xjQNUlsTxug

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

Previous Topic:	[GMCnet] Whatchamacallit
Next Topic:	air bag replacement?

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 21:03:01 CST 2024

Total time taken to generate the page: 0.02573 seconds