Home » Public Forums » GMCnet » [GMCnet] Flywheel for 6k Onan
| [GMCnet] Flywheel for 6k Onan [message #368464] |
Sat, 15 January 2022 12:49  |
stu@97381.com, Emery
Messages: 232
Registered: June 2020
Karma: 2
|
Senior Member |
|
|
My flywheel key sheared and allowed the flywheel to spin. It ground out the hub. Does anyone have a flywheel that they could bring to the spring convention?
Emery Stora
emerystora@mac.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
| [GMCnet] Re: Flywheel for 6k Onan [message #368465 is a reply to message #368464] |
Sat, 15 January 2022 13:01  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Emory,
For you as a long time friend in many ways, I'll send one to you via UPS.
I will have our shipping dept determine the cost and that is all we will
charge.
On Sat, Jan 15, 2022 at 10:49 AM Emery Stora via Gmclist <
gmclist@list.gmcnet.org> wrote:
> My flywheel key sheared and allowed the flywheel to spin. It ground out
> the hub. Does anyone have a flywheel that they could bring to the spring
> convention?
>
> Emery Stora
> emerystora@mac.com
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| [GMCnet] Re: Flywheel for 6k Onan [message #368466 is a reply to message #368465] |
Sat, 15 January 2022 14:06 |
Bruce Hart
Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Emery, I have an extra 6k flywheel you can have.
I will be having hand surgery on Thursday (20th) in Denver, so maybe we can
meet up somewhere?
On Sat, Jan 15, 2022 at 12:01 PM Jim Kanomata wrote:
> Emory,
> For you as a long time friend in many ways, I'll send one to you via UPS.
> I will have our shipping dept determine the cost and that is all we will
> charge.
>
> On Sat, Jan 15, 2022 at 10:49 AM Emery Stora via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> My flywheel key sheared and allowed the flywheel to spin. It ground out
>> the hub. Does anyone have a flywheel that they could bring to the spring
>> convention?
>>
>> Emery Stora
>> emerystora@mac.com
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Bruce Hart
1976 Palm Beach
LaGrange, Wyoming
GMC=Genetically Modified Chevy
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| [GMCnet] Re: Flywheel for 6k Onan [message #368468 is a reply to message #368466] |
Sat, 15 January 2022 22:48 |
stu@97381.com, Emery
Messages: 232
Registered: June 2020
Karma: 2
|
Senior Member |
|
|
That is fantastic. I had no idea you had a parts Onan. What time is your surgery? Is it a in-out procedure or do you have a hospital stay?
Emery
> On Jan 15, 2022, at 1:06 PM, Bruce Hart wrote:
>
> Emery, I have an extra 6k flywheel you can have.
> I will be having hand surgery on Thursday (20th) in Denver, so maybe we can
> meet up somewhere?
>
>> On Sat, Jan 15, 2022 at 12:01 PM Jim Kanomata wrote:
>>
>> Emory,
>> For you as a long time friend in many ways, I'll send one to you via UPS.
>> I will have our shipping dept determine the cost and that is all we will
>> charge.
>>
>> On Sat, Jan 15, 2022 at 10:49 AM Emery Stora via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> My flywheel key sheared and allowed the flywheel to spin. It ground out
>>> the hub. Does anyone have a flywheel that they could bring to the spring
>>> convention?
>>>
>>> Emery Stora
>>> emerystora@mac.com
>>>
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> Jim Kanomata ASE
>> Applied/GMC, Newark,CA
>> jimk@appliedairfilters.com
>> http://www.gmcrvparts.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> LaGrange, Wyoming
> GMC=Genetically Modified Chevy
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
| [GMCnet] Re: Flywheel for 6k Onan [message #368470 is a reply to message #368468] |
Sun, 16 January 2022 10:32 |
Bruce Hart
Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Day surgery,but no time has been set. I do have other parts and pieces that
I took off of an Onan
The Onan that was in the other 76 Palmbeach I had (Rusty) was bad and
I made the swap but kept the add on pieces.
I got the good Onan out of Harold and Betty Kennedy's coach when Corn
Doggie replaced his with a bigger unit.
On Sat, Jan 15, 2022 at 9:49 PM Emery Stora via Gmclist <
gmclist@list.gmcnet.org> wrote:
> That is fantastic. I had no idea you had a parts Onan. What time is your
> surgery? Is it a in-out procedure or do you have a hospital stay?
>
> Emery
>
>> On Jan 15, 2022, at 1:06 PM, Bruce Hart wrote:
>>
>> Emery, I have an extra 6k flywheel you can have.
>> I will be having hand surgery on Thursday (20th) in Denver, so maybe we
> can
>> meet up somewhere?
>>
>>> On Sat, Jan 15, 2022 at 12:01 PM Jim Kanomata
> wrote:
>>>
>>> Emory,
>>> For you as a long time friend in many ways, I'll send one to you via
> UPS.
>>> I will have our shipping dept determine the cost and that is all we will
>>> charge.
>>>
>>> On Sat, Jan 15, 2022 at 10:49 AM Emery Stora via Gmclist >> gmclist@list.gmcnet.org> wrote:
>>>
>>>> My flywheel key sheared and allowed the flywheel to spin. It ground
> out
>>>> the hub. Does anyone have a flywheel that they could bring to the
> spring
>>>> convention?
>>>>
>>>> Emery Stora
>>>> emerystora@mac.com
>>>>
>>>>
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>>
>>>
>>>
>>> --
>>> Jim Kanomata ASE
>>> Applied/GMC, Newark,CA
>>> jimk@appliedairfilters.com
>>> http://www.gmcrvparts.com
>>> 1-800-752-7502
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> LaGrange, Wyoming
>> GMC=Genetically Modified Chevy
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Bruce Hart
1976 Palm Beach
LaGrange, Wyoming
GMC=Genetically Modified Chevy
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| [GMCnet] Re: Flywheel for 6k Onan [message #368471 is a reply to message #368470] |
Sun, 16 January 2022 11:34 |
stu@97381.com, Emery
Messages: 232
Registered: June 2020
Karma: 2
|
Senior Member |
|
|
I definitely want the flywheel. Let me know when you are coming through and we’ll plan to meet. What time do you have to be there for surgery? Can I buy you lunch perhaps at the mall by Hwy 7?
Emery
> On Jan 16, 2022, at 9:32 AM, Bruce Hart wrote:
>
> Day surgery,but no time has been set. I do have other parts and pieces that
> I took off of an Onan
> The Onan that was in the other 76 Palmbeach I had (Rusty) was bad and
> I made the swap but kept the add on pieces.
> I got the good Onan out of Harold and Betty Kennedy's coach when Corn
> Doggie replaced his with a bigger unit.
>
>> On Sat, Jan 15, 2022 at 9:49 PM Emery Stora via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>> That is fantastic. I had no idea you had a parts Onan. What time is your
>> surgery? Is it a in-out procedure or do you have a hospital stay?
>>
>> Emery
>>
>>>> On Jan 15, 2022, at 1:06 PM, Bruce Hart wrote:
>>>
>>> Emery, I have an extra 6k flywheel you can have.
>>> I will be having hand surgery on Thursday (20th) in Denver, so maybe we
>> can
>>> meet up somewhere?
>>>
>>>> On Sat, Jan 15, 2022 at 12:01 PM Jim Kanomata
>> wrote:
>>>>
>>>> Emory,
>>>> For you as a long time friend in many ways, I'll send one to you via
>> UPS.
>>>> I will have our shipping dept determine the cost and that is all we will
>>>> charge.
>>>>
>>>> On Sat, Jan 15, 2022 at 10:49 AM Emery Stora via Gmclist >>> gmclist@list.gmcnet.org> wrote:
>>>>
>>>> > My flywheel key sheared and allowed the flywheel to spin. It ground
>> out
>>>> > the hub. Does anyone have a flywheel that they could bring to the
>> spring
>>>> > convention?
>>>> >
>>>> > Emery Stora
>>>> > emerystora@mac.com
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> >
>>>>
>>>>
>>>> --
>>>> Jim Kanomata ASE
>>>> Applied/GMC, Newark,CA
>>>> jimk@appliedairfilters.com
>>>> http://www.gmcrvparts.com
>>>> 1-800-752-7502
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>>
>>>
>>>
>>> --
>>> Bruce Hart
>>> 1976 Palm Beach
>>> LaGrange, Wyoming
>>> GMC=Genetically Modified Chevy
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> LaGrange, Wyoming
> GMC=Genetically Modified Chevy
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
| [GMCnet] Re: Flywheel for 6k Onan [message #368472 is a reply to message #368471] |
Sun, 16 January 2022 13:22 |
Bruce Hart
Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
They haven't set a time for the surgery yet, just the day.
Do you remember that I gave you the choke housing for your Onan a couple
of years back.
On Sun, Jan 16, 2022 at 10:34 AM Emery Stora via Gmclist <
gmclist@list.gmcnet.org> wrote:
> I definitely want the flywheel. Let me know when you are coming through
> and we’ll plan to meet. What time do you have to be there for surgery? Can
> I buy you lunch perhaps at the mall by Hwy 7?
>
> Emery
>
>> On Jan 16, 2022, at 9:32 AM, Bruce Hart wrote:
>>
>> Day surgery,but no time has been set. I do have other parts and pieces
> that
>> I took off of an Onan
>> The Onan that was in the other 76 Palmbeach I had (Rusty) was bad and
>> I made the swap but kept the add on pieces.
>> I got the good Onan out of Harold and Betty Kennedy's coach when Corn
>> Doggie replaced his with a bigger unit.
>>
>>> On Sat, Jan 15, 2022 at 9:49 PM Emery Stora via Gmclist >> gmclist@list.gmcnet.org> wrote:
>>>
>>> That is fantastic. I had no idea you had a parts Onan. What time is your
>>> surgery? Is it a in-out procedure or do you have a hospital stay?
>>>
>>> Emery
>>>
>>>> > On Jan 15, 2022, at 1:06 PM, Bruce Hart wrote:
>>>>
>>>> Emery, I have an extra 6k flywheel you can have.
>>>> I will be having hand surgery on Thursday (20th) in Denver, so maybe we
>>> can
>>>> meet up somewhere?
>>>>
>>>> > On Sat, Jan 15, 2022 at 12:01 PM Jim Kanomata
>>> wrote:
>>>> >
>>>> > Emory,
>>>> > For you as a long time friend in many ways, I'll send one to you via
>>> UPS.
>>>> > I will have our shipping dept determine the cost and that is all we
> will
>>>> > charge.
>>>> >
>>>> > On Sat, Jan 15, 2022 at 10:49 AM Emery Stora via Gmclist >>> > gmclist@list.gmcnet.org> wrote:
>>>> >
>>>> >> My flywheel key sheared and allowed the flywheel to spin. It ground
>>> out
>>>> >> the hub. Does anyone have a flywheel that they could bring to the
>>> spring
>>>> >> convention?
>>>> >>
>>>> >> Emery Stora
>>>> >> emerystora@mac.com
>>>> >>
>>>> >>
>>>> >> _______________________________________________
>>>> >> GMCnet mailing list
>>>> >> Unsubscribe or Change List Options:
>>>> >>
>>>> >
>>>> >
>>>> > --
>>>> > Jim Kanomata ASE
>>>> > Applied/GMC, Newark,CA
>>>> > jimk@appliedairfilters.com
>>>> > http://www.gmcrvparts.com
>>>> > 1-800-752-7502
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> >
>>>>
>>>>
>>>> --
>>>> Bruce Hart
>>>> 1976 Palm Beach
>>>> LaGrange, Wyoming
>>>> GMC=Genetically Modified Chevy
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> LaGrange, Wyoming
>> GMC=Genetically Modified Chevy
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Bruce Hart
1976 Palm Beach
LaGrange, Wyoming
GMC=Genetically Modified Chevy
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| [GMCnet] Re: Flywheel for 6k Onan [message #368473 is a reply to message #368472] |
Sun, 16 January 2022 13:43 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
I have an old Miller Wasp welder with a Kohler single cylinder engine. It
came into my possession because the owner used an pneumatic impact wrench
to attach the crankshaft nut that secured the flywheel taper. Well, it
snapped off the end of the crankshaft leaving no threads to secure it. I
looked at it and figured out that there was enough of a stub protruding
past the flywheel to allow me to mill the end of the crankshaft flat and
drill and tap the end of the crankshaft, which I did. I then used valve
lapping compound on the intersection, and without the key in place, lapped
the flywheel in to the crankshaft to insure a perfect fitting taper. Then I
cleaned up the lapping compound, inserted the key and installed the
flywheel. I then used a grade 8 Allen bolt and a thick washer that fit the
milled flange on the flywheel. I carefully torqued it into place with blue
loctite and it is still holding today.
So, my recommendation to you would be to lap that used flywheel into
your crankshaft before you torque that crank nut. And use hand tools. No
pneumatic wrenches on cast crankshaft, ever.
Jim Hupy
Salem, Oregon
On Sun, Jan 16, 2022, 11:23 AM Bruce Hart wrote:
> They haven't set a time for the surgery yet, just the day.
> Do you remember that I gave you the choke housing for your Onan a couple
> of years back.
>
> On Sun, Jan 16, 2022 at 10:34 AM Emery Stora via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> I definitely want the flywheel. Let me know when you are coming through
>> and we’ll plan to meet. What time do you have to be there for surgery?
> Can
>> I buy you lunch perhaps at the mall by Hwy 7?
>>
>> Emery
>>
>>> On Jan 16, 2022, at 9:32 AM, Bruce Hart wrote:
>>>
>>> Day surgery,but no time has been set. I do have other parts and pieces
>> that
>>> I took off of an Onan
>>> The Onan that was in the other 76 Palmbeach I had (Rusty) was bad and
>>> I made the swap but kept the add on pieces.
>>> I got the good Onan out of Harold and Betty Kennedy's coach when Corn
>>> Doggie replaced his with a bigger unit.
>>>
>>>> On Sat, Jan 15, 2022 at 9:49 PM Emery Stora via Gmclist >>> gmclist@list.gmcnet.org> wrote:
>>>>
>>>> That is fantastic. I had no idea you had a parts Onan. What time is
> your
>>>> surgery? Is it a in-out procedure or do you have a hospital stay?
>>>>
>>>> Emery
>>>>
>>>> >> On Jan 15, 2022, at 1:06 PM, Bruce Hart wrote:
>>>> >
>>>> > Emery, I have an extra 6k flywheel you can have.
>>>> > I will be having hand surgery on Thursday (20th) in Denver, so maybe
> we
>>>> can
>>>> > meet up somewhere?
>>>> >
>>>> >> On Sat, Jan 15, 2022 at 12:01 PM Jim Kanomata jimkanomata@gmail.com>
>>>> wrote:
>>>> >>
>>>> >> Emory,
>>>> >> For you as a long time friend in many ways, I'll send one to you via
>>>> UPS.
>>>> >> I will have our shipping dept determine the cost and that is all we
>> will
>>>> >> charge.
>>>> >>
>>>> >> On Sat, Jan 15, 2022 at 10:49 AM Emery Stora via Gmclist >>> >> gmclist@list.gmcnet.org> wrote:
>>>> >>
>>>> >>> My flywheel key sheared and allowed the flywheel to spin. It
> ground
>>>> out
>>>> >>> the hub. Does anyone have a flywheel that they could bring to the
>>>> spring
>>>> >>> convention?
>>>> >>>
>>>> >>> Emery Stora
>>>> >>> emerystora@mac.com
>>>> >>>
>>>> >>>
>>>> >>> _______________________________________________
>>>> >>> GMCnet mailing list
>>>> >>> Unsubscribe or Change List Options:
>>>> >>>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Jim Kanomata ASE
>>>> >> Applied/GMC, Newark,CA
>>>> >> jimk@appliedairfilters.com
>>>> >> http://www.gmcrvparts.com
>>>> >> 1-800-752-7502
>>>> >> _______________________________________________
>>>> >> GMCnet mailing list
>>>> >> Unsubscribe or Change List Options:
>>>> >>
>>>> >
>>>> >
>>>> > --
>>>> > Bruce Hart
>>>> > 1976 Palm Beach
>>>> > LaGrange, Wyoming
>>>> > GMC=Genetically Modified Chevy
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>>
>>>
>>>
>>> --
>>> Bruce Hart
>>> 1976 Palm Beach
>>> LaGrange, Wyoming
>>> GMC=Genetically Modified Chevy
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> LaGrange, Wyoming
> GMC=Genetically Modified Chevy
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
| [GMCnet] Re: Flywheel for 6k Onan [message #368477 is a reply to message #368473] |
Sun, 16 January 2022 20:03 |
Bruce Hart
Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Jim, do you remember what grit the lapping compound was?
On Sun, Jan 16, 2022 at 12:43 PM James Hupy wrote:
> I have an old Miller Wasp welder with a Kohler single cylinder engine. It
> came into my possession because the owner used an pneumatic impact wrench
> to attach the crankshaft nut that secured the flywheel taper. Well, it
> snapped off the end of the crankshaft leaving no threads to secure it. I
> looked at it and figured out that there was enough of a stub protruding
> past the flywheel to allow me to mill the end of the crankshaft flat and
> drill and tap the end of the crankshaft, which I did. I then used valve
> lapping compound on the intersection, and without the key in place, lapped
> the flywheel in to the crankshaft to insure a perfect fitting taper. Then I
> cleaned up the lapping compound, inserted the key and installed the
> flywheel. I then used a grade 8 Allen bolt and a thick washer that fit the
> milled flange on the flywheel. I carefully torqued it into place with blue
> loctite and it is still holding today.
> So, my recommendation to you would be to lap that used flywheel into
> your crankshaft before you torque that crank nut. And use hand tools. No
> pneumatic wrenches on cast crankshaft, ever.
> Jim Hupy
> Salem, Oregon
>
> On Sun, Jan 16, 2022, 11:23 AM Bruce Hart wrote:
>
>> They haven't set a time for the surgery yet, just the day.
>> Do you remember that I gave you the choke housing for your Onan a couple
>> of years back.
>>
>> On Sun, Jan 16, 2022 at 10:34 AM Emery Stora via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> I definitely want the flywheel. Let me know when you are coming through
>>> and we’ll plan to meet. What time do you have to be there for surgery?
>> Can
>>> I buy you lunch perhaps at the mall by Hwy 7?
>>>
>>> Emery
>>>
>>>> On Jan 16, 2022, at 9:32 AM, Bruce Hart wrote:
>>>>
>>>> Day surgery,but no time has been set. I do have other parts and
> pieces
>>> that
>>>> I took off of an Onan
>>>> The Onan that was in the other 76 Palmbeach I had (Rusty) was bad and
>>>> I made the swap but kept the add on pieces.
>>>> I got the good Onan out of Harold and Betty Kennedy's coach when Corn
>>>> Doggie replaced his with a bigger unit.
>>>>
>>>> > On Sat, Jan 15, 2022 at 9:49 PM Emery Stora via Gmclist >>> > gmclist@list.gmcnet.org> wrote:
>>>> >
>>>> > That is fantastic. I had no idea you had a parts Onan. What time is
>> your
>>>> > surgery? Is it a in-out procedure or do you have a hospital stay?
>>>> >
>>>> > Emery
>>>> >
>>>> >>> On Jan 15, 2022, at 1:06 PM, Bruce Hart
> wrote:
>>>> >>
>>>> >> Emery, I have an extra 6k flywheel you can have.
>>>> >> I will be having hand surgery on Thursday (20th) in Denver, so
> maybe
>> we
>>>> > can
>>>> >> meet up somewhere?
>>>> >>
>>>> >>> On Sat, Jan 15, 2022 at 12:01 PM Jim Kanomata > jimkanomata@gmail.com>
>>>> > wrote:
>>>> >>>
>>>> >>> Emory,
>>>> >>> For you as a long time friend in many ways, I'll send one to you
> via
>>>> > UPS.
>>>> >>> I will have our shipping dept determine the cost and that is all
> we
>>> will
>>>> >>> charge.
>>>> >>>
>>>> >>> On Sat, Jan 15, 2022 at 10:49 AM Emery Stora via Gmclist >>> >>> gmclist@list.gmcnet.org> wrote:
>>>> >>>
>>>> >>>> My flywheel key sheared and allowed the flywheel to spin. It
>> ground
>>>> > out
>>>> >>>> the hub. Does anyone have a flywheel that they could bring to
> the
>>>> > spring
>>>> >>>> convention?
>>>> >>>>
>>>> >>>> Emery Stora
>>>> >>>> emerystora@mac.com
>>>> >>>>
>>>> >>>>
>>>> >>>> _______________________________________________
>>>> >>>> GMCnet mailing list
>>>> >>>> Unsubscribe or Change List Options:
>>>> >>>>
>>>> >>>
>>>> >>>
>>>> >>> --
>>>> >>> Jim Kanomata ASE
>>>> >>> Applied/GMC, Newark,CA
>>>> >>> jimk@appliedairfilters.com
>>>> >>> http://www.gmcrvparts.com
>>>> >>> 1-800-752-7502
>>>> >>> _______________________________________________
>>>> >>> GMCnet mailing list
>>>> >>> Unsubscribe or Change List Options:
>>>> >>>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Bruce Hart
>>>> >> 1976 Palm Beach
>>>> >> LaGrange, Wyoming
>>>> >> GMC=Genetically Modified Chevy
>>>> >> _______________________________________________
>>>> >> GMCnet mailing list
>>>> >> Unsubscribe or Change List Options:
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> >
>>>>
>>>>
>>>> --
>>>> Bruce Hart
>>>> 1976 Palm Beach
>>>> LaGrange, Wyoming
>>>> GMC=Genetically Modified Chevy
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> LaGrange, Wyoming
>> GMC=Genetically Modified Chevy
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Bruce Hart
1976 Palm Beach
LaGrange, Wyoming
GMC=Genetically Modified Chevy
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
Goto Forum:
Current Time: Sun Jun 30 12:07:14 CDT 2024
Total time taken to generate the page: 0.04528 seconds
|
GMCforum
Search
Help
Register
Login
Home
