GMCforum: GMCnet » [GMCnet] Camber bolts

Home » Public Forums » GMCnet » [GMCnet] Camber bolts

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Re: Camber bolts [message #367656 is a reply to message #367654]

Sun, 21 November 2021 20:27

Bill Van Vlack

Messages: 419
Registered: September 2015
Location: Guemes Island, Washington

Karma:

Senior Member

Call DJ; he can send you a grade 8, fine thread, tall nut, OEM sized machined flat.

https://www.djsgmc.com/default.html

Bill Van Vlack '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.

Report message to a moderator

[Message index]

		[GMCnet] Camber bolts By: Keith V on Sat, 20 November 2021 18:32
		Re: [GMCnet] Camber bolts By: Bill Van Vlack on Sat, 20 November 2021 19:42
		[GMCnet] Re: Camber bolts By: jimk on Sat, 20 November 2021 19:47
		Re: [GMCnet] Camber bolts By: lqqkatjon on Sat, 20 November 2021 19:53
		[GMCnet] Re: Camber bolts By: Keith V on Sat, 20 November 2021 20:14
		[GMCnet] Re: Camber bolts By: jimk on Sat, 20 November 2021 21:30
		Re: [GMCnet] Camber bolts By: boybach on Sun, 21 November 2021 01:17
		Re: [GMCnet] Camber bolts By: Bill Van Vlack on Sun, 21 November 2021 01:25
		Re: [GMCnet] Camber bolts By: roy1 on Sun, 21 November 2021 12:57
		[GMCnet] Re: Camber bolts By: James Hupy on Sun, 21 November 2021 13:40
		[GMCnet] Re: Camber bolts By: Gerard Hickey on Sun, 21 November 2021 19:41
		Re: [GMCnet] Re: Camber bolts By: Bill Van Vlack on Sun, 21 November 2021 20:27
		[GMCnet] Re: Camber bolts By: Keith V on Mon, 22 November 2021 15:01

Previous Topic:	what do i need to know about intake corssover ?
Next Topic:	What model Onan was the 4.0 for the GMC ?

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Jul 04 02:11:47 CDT 2024

Total time taken to generate the page: 0.00962 seconds