GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » right side output shaft attachment bearing/seal
right side output shaft attachment bearing/seal [message #367589] Mon, 15 November 2021 20:57 Go to next message
sandy trout is currently offline  sandy trout   United States
Messages: 51
Registered: October 2018
Location: texas
Karma: 1
Member
Anyone know where you can get replacement bearing/seals for the right inboard shaft attachment bearing that rides in the bolt on bracket outboard of the differential?
Re: right side output shaft attachment bearing/seal [message #367590 is a reply to message #367589] Mon, 15 November 2021 21:34 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
Is this what you are looking for?

https://www.gmcmi.com/combogroup/final-drive/?p=front-axle&v=Final%20Drive


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: right side output shaft attachment bearing/seal [message #367593 is a reply to message #367589] Tue, 16 November 2021 09:22 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
sandy trout wrote on Mon, 15 November 2021 21:57
Anyone know where you can get replacement bearing/seals for the right inboard shaft attachment bearing that rides in the bolt on bracket outboard of the differential?
Sandy,

Did you call GMCRV parts (aka Applied, aka JimK)?

Matt


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
[GMCnet] Re: right side output shaft attachment bearing/seal [message #367597 is a reply to message #367593] Tue, 16 November 2021 12:44 Go to previous messageGo to next message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
If we are addressing the bearing that is attached to the hanger, there is
no seal there as the bearing is a sealed bearing.
However if your needing one that is attached to the Final drive case.it is
a double lip seal.
We stock All and any parts for the coaches.
We are now facing Back Orders on lot of the parts.
Even the ZipDee awning are on back order.

On Tue, Nov 16, 2021 at 7:23 AM Matt Colie wrote:

> sandy trout wrote on Mon, 15 November 2021 21:57
>> Anyone know where you can get replacement bearing/seals for the right
> inboard shaft attachment bearing that rides in the bolt on bracket outboard
>> of the differential?
>
> Sandy,
>
> Did you call GMCRV parts (aka Applied, aka JimK)?
>
> Matt
> --
> Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL,
> GMCES
> Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum
> Brakes with Applied Control Arms
> SE Michigan - Near DTW - Twixt A2 and Detroit
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>


--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:


Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
Re: [GMCnet] Re: right side output shaft attachment bearing/seal [message #367600 is a reply to message #367597] Tue, 16 November 2021 18:25 Go to previous messageGo to next message
sandy trout is currently offline  sandy trout   United States
Messages: 51
Registered: October 2018
Location: texas
Karma: 1
Member
Thanks for the diagram and the info.
I found the original Delco part RW508R and what appears to be a replacement Timkin RW508BR but I haven't determined if is sealed from the pictures.

[Updated on: Tue, 16 November 2021 20:21]

Report message to a moderator

Re: [GMCnet] Re: right side output shaft attachment bearing/seal [message #367601 is a reply to message #367600] Tue, 16 November 2021 19:25 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
sandy trout wrote on Tue, 16 November 2021 18:25
Thanks for the diagram and the info.
I found the original Delco part RW5088 and what appears to be a replacement Timkin RW508BR but I haven't determined if is sealed from the pictures.

Take a closer look at the part #. It looks like part # is RW508B...That last letter is a "B" as in Boy, not an "8". Just what I noticed.....


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: right side output shaft attachment bearing/seal [message #367602 is a reply to message #367589] Tue, 16 November 2021 20:25 Go to previous messageGo to next message
sandy trout is currently offline  sandy trout   United States
Messages: 51
Registered: October 2018
Location: texas
Karma: 1
Member
No, I didn't contact Jim as I figured I could find it local.
Now the confusion, I see they shows a different number for the 3:21 ratio which my 78 has.
RW507C or a RW507CR (disregard the retainer)
I think all the inner axles are the same regardless of year, wonder if they changed the attachment housing diameter?
[GMCnet] Re: right side output shaft attachment bearing/seal [message #367603 is a reply to message #367601] Tue, 16 November 2021 22:41 Go to previous messageGo to next message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
Senior Member
Like I said, NO Seal on the bearing as it is a sealed unit.
Trust me I have dealt with them in last 40 years.

On Tue, Nov 16, 2021 at 5:25 PM Larry wrote:

> sandy trout wrote on Tue, 16 November 2021 18:25
>> Thanks for the diagram and the info.
>> I found the original Delco part RW5088 and what appears to be a
> replacement Timkin RW508BR but I haven't determined if is sealed from the
>> pictures.
>
>
> Take a closer look at the part #. It looks like part # is RW508B...That
> last letter is a "B" as in Boy, not an "8". Just what I noticed.....
> --
> Larry
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>


--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:



Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
Re: [GMCnet] Re: right side output shaft attachment bearing/seal [message #367618 is a reply to message #367603] Wed, 17 November 2021 19:47 Go to previous message
sandy trout is currently offline  sandy trout   United States
Messages: 51
Registered: October 2018
Location: texas
Karma: 1
Member
www.bdub.net/gmcmhparts/#FRONTAXLE

Found this and it says the correct bearing is RW-507-CR

[Updated on: Wed, 17 November 2021 22:47]

Report message to a moderator

Previous Topic: Shock Absorbers
Next Topic: Stu rasmussen - passed away
Goto Forum:
  


Current Time: Fri Jun 21 15:34:09 CDT 2024

Total time taken to generate the page: 0.00610 seconds