GMCforum: GMCnet » Steering box centering

Home » Public Forums » GMCnet » Steering box centering

Show: Today's Messages :: Polls :: Message Navigator

Re: Steering box centering [message #367360 is a reply to message #367287]

Thu, 28 October 2021 15:48

Greg C.

Messages: 224
Registered: October 2019
Location: Knoxville, TN

Karma:

Senior Member

So I'm fighting a back injury right now, and I'm not able to do much. But today I went out to the coach and checked the amount of turns lock to lock. It looks like about 3-1/4 turns. So, from Jim Hupy, this is not a factory steering box.

Am I screwed here? Does this box have the infamous "high spot" that corresponds with the input shaft flat aligned with the cover axis?

Or are all bets off?

It does require more hand movement than I would like to keep it straight going down the road. I have not yet removed the intermediate shaft to confirm the position of the input shaft flat, but since the steering wheel is out, I'm pretty sure that everything needs adjustment.

Greg Crawford KM4ZCR Knoxville, TN "Ruby Sue" 1977 Royale Rear Bath 403 Engine American Eagle Wheels Early Version Alex Sirum Quad bags

Report message to a moderator

[Message index]

		Steering box centering By: Greg C. on Sat, 23 October 2021 18:21
		Re: Steering box centering By: Matt Colie on Sat, 23 October 2021 18:43
		[GMCnet] Re: Steering box centering By: James Hupy on Sat, 23 October 2021 18:52
		Re: Steering box centering By: Greg C. on Sat, 23 October 2021 19:19
		Re: Steering box centering By: Bill Van Vlack on Sat, 23 October 2021 23:44
		Re: Steering box centering By: Greg C. on Sun, 24 October 2021 11:42
		Re: Steering box centering By: Bill Van Vlack on Sun, 24 October 2021 13:24
		Re: Steering box centering By: JohnL455 on Sun, 24 October 2021 19:22
		Re: Steering box centering By: Greg C. on Mon, 25 October 2021 11:26
		[GMCnet] Re: Steering box centering By: jimk on Mon, 25 October 2021 11:56
		[GMCnet] Re: Steering box centering By: Ken Henderson on Mon, 25 October 2021 15:51
		Re: Steering box centering By: Greg C. on Tue, 26 October 2021 10:00
		Re: Steering box centering By: Bill Van Vlack on Tue, 26 October 2021 10:13
		Re: Steering box centering By: Greg C. on Tue, 26 October 2021 10:07
		Re: Steering box centering By: TR 1 on Tue, 26 October 2021 13:25
		Re: Steering box centering By: Richard RV on Thu, 28 October 2021 08:10
		Re: Steering box centering By: Bill Van Vlack on Thu, 28 October 2021 11:20
		[GMCnet] Re: Steering box centering By: jimk on Thu, 28 October 2021 12:42
		[GMCnet] Re: Steering box centering By: bdub on Thu, 28 October 2021 20:11
		Re: Steering box centering By: RF_Burns on Tue, 26 October 2021 20:13
		[GMCnet] Re: Steering box centering By: jimk on Tue, 26 October 2021 22:56
		Re: Steering box centering By: boybach on Wed, 27 October 2021 00:56
		[GMCnet] Re: Steering box centering By: jimk on Wed, 27 October 2021 09:03
		[GMCnet] Re: Steering box centering By: James Hupy on Wed, 27 October 2021 09:57
		[GMCnet] Re: Steering box centering By: jimk on Wed, 27 October 2021 10:40
		Re: Steering box centering By: Bill Van Vlack on Wed, 27 October 2021 11:45
		[GMCnet] Re: Steering box centering By: tmaki on Wed, 27 October 2021 12:54
		Re: Steering box centering By: RF_Burns on Thu, 28 October 2021 06:25
		Re: Steering box centering By: boybach on Thu, 28 October 2021 13:09
		Re: Steering box centering By: Greg C. on Thu, 28 October 2021 15:48
		[GMCnet] Re: Steering box centering By: Ken Henderson on Thu, 28 October 2021 16:16
		Re: Steering box centering By: Bill Van Vlack on Thu, 28 October 2021 16:30
		Re: Steering box centering By: boybach on Thu, 28 October 2021 16:39
		Re: Steering box centering By: Greg C. on Thu, 28 October 2021 20:34
		Re: Steering box centering By: Bill Van Vlack on Fri, 29 October 2021 11:34
		[GMCnet] Re: Steering box centering By: jimk on Fri, 29 October 2021 16:08

Previous Topic:	[GMCnet] Tid Bit. The stock fan clutch
Next Topic:	WEATHER MAP

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 02 15:09:32 CDT 2024

Total time taken to generate the page: 0.00865 seconds