| Howell EFI with EBL [message #367293] |
Sun, 24 October 2021 09:27  |
Biggamehunter
Messages: 17
Registered: April 2021
Karma: 0
|
Junior Member |
|
|
Hi I am looking for some information on the set up I picked up. I got it used so I do not know much about it. The ECM has a hand written number on it AO58 adx. it has a black box that plugs in to the ALDL. it has 2 led lights,4 dip switches and a serial port. The ECM has a prom installed but no other modifications to it. All I could make out on the prom is 455. Will I need a serial to USB converter or just use the serial port on my laptop? the kit I got has a Holly TBI unit with 2 pin terminal connectors on the injectors, not round tops. It has a high pressure (Walbro)fuel pump. When checking data should I use my scan tool or some thing else? Just trying to find out what I have and how to use it. Thank you for any and all help.
Michael Orlandi
Fairfield, Ca
1973 GMC Canyonlands
Lenzi knuckles/ hubs
|
|
|
|
| Re: Howell EFI with EBL [message #367294 is a reply to message #367293] |
Sun, 24 October 2021 10:30  |
Bill Van Vlack
Messages: 419
Registered: September 2015
Location: Guemes Island, Washington
Karma: 14
|
Senior Member |
|
|
Doesn't sound like the DynamicEFI EBL system. Their system is delivered with a generic prom that is then modified and flashed by the user via software so the prom would not have a sticker identifying it being for a particular engine. This sounds like a dedicated prom flashed by the supplier at the factory with a prom flasher.
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.
|
|
|
|
| [GMCnet] Re: Howell EFI with EBL [message #367299 is a reply to message #367294] |
Sun, 24 October 2021 18:42 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I can assist you as we are the major supplier of the Kit.
Contact me 800-752-7502.
On Sun, Oct 24, 2021 at 8:30 AM Bill Van Vlack
wrote:
> Doesn't sound like the DynamicEFI EBL system. Their system is delivered
> with a generic prom that is then modified and flashed by the user via
> software
> so the prom would not have a sticker identifying it being for a particular
> engine. This sounds like a dedicated prom flashed by the supplier at the
> factory with a prom flasher.
> --
> Bill Van Vlack
> '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o
> mid
> November 2015.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| [GMCnet] Re: Howell EFI with EBL [message #367301 is a reply to message #367293] |
Sun, 24 October 2021 18:46 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
EBL does not have a Prom chip, just an Embedded Locker circuit.
That can be modified at any time.
We provide them ready to go, turn key.
On Sun, Oct 24, 2021 at 4:42 PM Jim Kanomata wrote:
> I can assist you as we are the major supplier of the Kit.
> Contact me 800-752-7502.
>
>
> On Sun, Oct 24, 2021 at 8:30 AM Bill Van Vlack
> wrote:
>
>> Doesn't sound like the DynamicEFI EBL system. Their system is delivered
>> with a generic prom that is then modified and flashed by the user via
>> software
>> so the prom would not have a sticker identifying it being for a
>> particular engine. This sounds like a dedicated prom flashed by the
>> supplier at the
>> factory with a prom flasher.
>> --
>> Bill Van Vlack
>> '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
>> Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o
>> mid
>> November 2015.
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.gmcrvparts.com
> 1-800-752-7502
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Re: Howell EFI with EBL [message #367308 is a reply to message #367301] |
Mon, 25 October 2021 10:55 |
Bill Van Vlack
Messages: 419
Registered: September 2015
Location: Guemes Island, Washington
Karma: 14
|
Senior Member |
|
|
FWIW, the stock GM ECM has a PROM. Aftermarket systems that provide custom 455 chip like yours are PROMs. DynamicEFI's EBL system have a PROM. They are different types of Programmable Read Only Memory (PROMs) installed in the GM ECM, but they are PROMs. The EBL Prom is installed on a DynamicEFI daughterboard.
Your system that has a custom 455 chip and is marked with "AO58 adx" is readable by TunerPro RT, but it is not an EBL system. You can ship your ECM to DynamicEFI and they will convert it to the EBL system which allows flashing a new program while underway - among many other features; see https://groups.google.com/g/gmcmh-efi for lots more info on the EBL system from GMCMH owners.
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
