[GMCnet] Caster [message #367119] |
Sat, 09 October 2021 16:24 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
Well unfortunately im not as dumb as i thought.
I put offset bushings in my 76 and was still only able to get 0 degrees caster.
So i figured i put them on backwards.
Pulled it apart today and they are in correctly with the hole closest to the balljoint.
So now what do I do?
Put my new offset bushings in the front?
Seems like the only fix
Keith vasilakes
1976 ex royale
Minnesota
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
Re: [GMCnet] Caster [message #367126 is a reply to message #367119] |
Sun, 10 October 2021 10:00 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
Do you have the cams set to pull the rear of the arm inboard? Rear offset should have hole near ball joint as you mentioned. If fronts are done the the hole should be inboard to move front of arm outboard and balljoint rearward.
How are you measuring caster?
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
[GMCnet] Re: Caster [message #367127 is a reply to message #367126] |
Sun, 10 October 2021 10:14 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
Yeah the cams were set all the way in in back and out in front. There is an old school alignment shop that specializes on streetrods. Had it on his rack. So im sure he measured it right.
The problem looks to be mostly on the pass side as the cams on the drivers side are only 1/2 way
So hopefully putting the bushings on the front will fix it
________________________________
From: John R.Lebetski
Sent: Sunday, October 10, 2021 10:00:48 AM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: Caster
Do you have the cams set to pull the rear of the arm inboard? Rear offset should have hole near ball joint as you mentioned. If fronts are done the
the hole should be inboard to move front of arm outboard and balljoint rearward.
How are you measuring caster?
--
John Lebetski
Woodstock, IL
77 Eleganza II
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
Re: [GMCnet] Caster [message #367128 is a reply to message #367119] |
Sun, 10 October 2021 10:44 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
Strange. I got over 4° with no offset bushings. Hard to say without being there.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
[GMCnet] Re: Caster [message #367131 is a reply to message #367128] |
Sun, 10 October 2021 11:03 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
Gm build 'quality' ?
________________________________
From: John R.Lebetski
Sent: Sunday, October 10, 2021 10:44:13 AM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: Caster
Strange. I got over 4° with no offset bushings. Hard to say without being there.
--
John Lebetski
Woodstock, IL
77 Eleganza II
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
[GMCnet] Re: Caster [message #367133 is a reply to message #367127] |
Sun, 10 October 2021 11:28 |
James Hupy
Messages: 6806 Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Do you have your coach at the absolute correct ride height? If not, all
alignment adjustments are futile. Jus' Sayin.
Jim Hupy
Salem, Oregon
Aligned dozens of GMC's with offset bushings, never saw one that I
couldn't get at least 3° caster with.
On Sun, Oct 10, 2021, 9:03 AM Keith V wrote:
> Gm build 'quality' ?
> ________________________________
> From: John R.Lebetski
> Sent: Sunday, October 10, 2021 10:44:13 AM
> To: gmclist@list.gmcnet.org
> Subject: [GMCnet] Re: Caster
>
> Strange. I got over 4° with no offset bushings. Hard to say without
> being there.
> --
> John Lebetski
> Woodstock, IL
> 77 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
[GMCnet] Re: Caster [message #367134 is a reply to message #367133] |
Sun, 10 October 2021 11:33 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
Yeah, i made sure front and rear were correct height on the rack. Im usually pretty good at being the outlier.
Ill put the offsets in the front and try again
________________________________
From: James Hupy
Sent: Sunday, October 10, 2021 11:28:05 AM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: Caster
Do you have your coach at the absolute correct ride height? If not, all
alignment adjustments are futile. Jus' Sayin.
Jim Hupy
Salem, Oregon
Aligned dozens of GMC's with offset bushings, never saw one that I
couldn't get at least 3° caster with.
On Sun, Oct 10, 2021, 9:03 AM Keith V wrote:
> Gm build 'quality' ?
> ________________________________
> From: John R.Lebetski
> Sent: Sunday, October 10, 2021 10:44:13 AM
> To: gmclist@list.gmcnet.org
> Subject: [GMCnet] Re: Caster
>
> Strange. I got over 4° with no offset bushings. Hard to say without
> being there.
> --
> John Lebetski
> Woodstock, IL
> 77 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|