GMCforum: GMCnet » Victron Combiner Install.

Home » Public Forums » GMCnet » Victron Combiner Install.

Show: Today's Messages :: Polls :: Message Navigator

Victron Combiner Install. [message #367025]

Sun, 03 October 2021 12:49

Tom Katzenberger

Messages: 399
Registered: June 2019
Location: Kingsville, MD

Karma:

Senior Member

Hello all,

I am installing a Victron Combiner, Cyrix-ct and keeping it attached to the existing isolator.

I have the (2) large brass post on the combiner hooked up to the outside post on the isolator and the #86 ground post connected to ground.

Is post #85 generally ignored and do I need to install 120A fuses on the heavy cables going to the isolator outer terminals?

Thanks in advance,
Tom K.

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

Report message to a moderator

[Message index]

		Victron Combiner Install. By: Tom Katzenberger on Sun, 03 October 2021 12:49
		Re: Victron Combiner Install. By: lqqkatjon on Sun, 03 October 2021 14:33
		Re: Victron Combiner Install. By: Tom Katzenberger on Sun, 03 October 2021 14:56

Previous Topic:	[GMCnet] Exhaust manifold bolts GM 9440954
Next Topic:	[GMCnet] Interesting mileage comparison. A no tech post.

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Jul 02 03:46:22 CDT 2024

Total time taken to generate the page: 0.01864 seconds