GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Summit Back Up Vacuum Booster
Summit Back Up Vacuum Booster [message #366432] Wed, 01 September 2021 12:26 Go to previous message
Tom Katzenberger is currently offline  Tom Katzenberger   United States
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma:
Senior Member
Hello All,

I purchased a backup vacuum booster from summit racing. They show 2 options for installation. Both options tee into the engine vacuum line between the engine and the booster. The boosters on the diagrams have a single vacuum input port. My sensitized booster has 2 vacuum inputs ports. Can I avoid the tee in the engine vacuum line and plumb directly into the second port on my booster?

Thanks in advance,
Tom K.

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Previous Topic: Rostra cruise trouble shoot
Next Topic: Propane tank valve
Goto Forum:
  


Current Time: Thu Sep 19 19:58:32 CDT 2024

Total time taken to generate the page: 0.00656 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software