| Rostra cruise trouble shoot [message #366426] |
Wed, 01 September 2021 09:33  |
Ken Shaffer
Messages: 89
Registered: September 2017
Location: Marion Iowa
Karma: -1
|
Member |
|
|
I installed the Rostra electronic Cruise a couple years ago. It had been working for the most part. Just a little temperamental at times having to set it a few times before it took.
It isn’t working now. I checked for power and ground. Both are good. Does anybody have any suggestions for me? I just don’t know where else to check at this point,
Ken Shaffer
Marion Iowa
73 Canyon Lands, 455, Micro-level, Alum radiator, Alcoa wheels, Lenzi hubs/bearings, Howell EFI/EBL, Rostra Cruise, Custom interior
|
|
|
|
|
|
| [GMCnet] Re: Rostra cruise trouble shoot [message #366441 is a reply to message #366426] |
Wed, 01 September 2021 19:18  |
David Simpson
Messages: 4
Registered: June 2020
Karma: 0
|
Junior Member |
|
|
I had similar problems on two occasions - the solutions for me were
found under the coach, at the magnets glued to the shaft and the wires
connected to the pickup - first fix was replacing the magnets glued to
the shaft (one had disappeared - two are necessary on FWD vehicles); the
second fix identified that the spade clips attaching the wires to the
pickup were oily and loose. Cleaned and crimped tighter.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
