Home » Public Forums » GMCnet » A quick easy question for the EFI guys
A quick easy question for the EFI guys [message #366245] |
Fri, 20 August 2021 17:38 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
I am in the process of installing the Howell EFI and electronic Dist. My EBL does not have a USB connection. How does one connect a laptop to the EBL?
Thanks,
Tom K.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
[GMCnet] Re: A quick easy question for the EFI guys [message #366247 is a reply to message #366245] |
Fri, 20 August 2021 18:27 |
Margie Van Winkle
Messages: 51 Registered: March 2012
Karma: 0
|
Member |
|
|
Does your tablet have a mini USB port? If so, you can get an adapter from
mini to regular. If your mini USB is being used to charge your tablet then
I think you can get an adapter to allow charging and other USB ports. I
have heard people say they have had trouble getting it to work reliably.
Randy
On Fri, Aug 20, 2021, 4:38 PM wrote:
> I am in the process of installing the Howell EFI and electronic Dist. My
> EBL does not have a USB connection. How does one connect a laptop to the
> EBL?
>
> Thanks,
> Tom K.
> --
> Tom & Oki Katzenberger,
> Kingsville, Maryland,
> 1977 23' Birchaven, 455 C.I.D.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
Re: A quick easy question for the EFI guys [message #366251 is a reply to message #366245] |
Fri, 20 August 2021 20:18 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Thank you Randy,
I think I will to have a dedicated tablet of some sort and keep it permanently mounted. I am just running the harness now and did not see the USB on the EBL or harness. Do I have to make the USB connection? The EBL does say "Whats Up Display" and a date. So that is good news. I am looking to run a data wire of some sort to the dash area.
Thanks again,
Tom K.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
[GMCnet] Re: A quick easy question for the EFI guys [message #366254 is a reply to message #366252] |
Fri, 20 August 2021 22:06 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
The new EBL is not USB, it is still TTL level serial and has to be translated to USB using an adapter
The change was to move the IO to use free pins on the connector
________________________________
From: Bruce Hislop
Sent: Friday, August 20, 2021 9:55 PM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: A quick easy question for the EFI guys
EBL changed from an RS232 serial connection to a USB connection around 2018. The USB cable has a stereo style 1/8" plug on one end that plugs into a
female connector on the wiring harness.
The previous RS232 cable had a modular cable that plugged in to the EBL.
You may need to add the female connector to your wiring harness for the newer USB cable. Here is a page that shows how:
http://dynamicefi.com/EBL_Flash_Install.php
--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
Re: [GMCnet] Re: A quick easy question for the EFI guys [message #366255 is a reply to message #366247] |
Fri, 20 August 2021 22:34 |
rvanwin
Messages: 325 Registered: April 2007 Location: Battlefield, MO
Karma: 6
|
Senior Member |
|
|
Sorry, I misunderstood your question. If you do not have a USB on your EBL, then you should have a telephone cable from the EBL to a Serial connector. If you have this cabling, then you need a Serial to USB connector. I have used this one with very good success: https://www.amazon.com/gp/product/B00425S1H8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
If you do not have the telephone cable connector (RJ46) to Serial connector which you should have received with your EBL system, then you should contact where you got your EBL system from to get the necessary connector. Make sure you use a 4-wire telephone cable.
If your EBL box does not have a telephone port (RJ46) then you have a system manufactured sometime after 2018. With this system, there should be a cable that has pins for 3 wires to attach to the data cable connectors (Blue) on the back of the EBL box. This cable has an Audio type connector that should have a USB connector on the other end. If you don't have these cables then contact your supplier.
Randy & Margie
'77 Eleganza II '403'
Battlefield, MO
|
|
|
Re: A quick easy question for the EFI guys [message #366259 is a reply to message #366245] |
Sat, 21 August 2021 06:45 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
You guys are great!!!!!! Thank you so much. I will carry on with the knowledge gained.
Have a great weekend,
Tom K
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
Re: A quick easy question for the EFI guys [message #366260 is a reply to message #366252] |
Sat, 21 August 2021 06:51 |
rjw
Messages: 697 Registered: September 2005
Karma: 4
|
Senior Member |
|
|
RF_Burns wrote on Fri, 20 August 2021 22:55EBL changed from an RS232 serial connection to a USB connection around 2018. The USB cable has a stereo style 1/8" plug on one end that plugs into a female connector on the wiring harness.
The previous RS232 cable had a modular cable that plugged in to the EBL.
I must have been sleeping in class when this happened. I didn't know about the change. I am wondering what else I missed since I installed my EBL over 10 years ago.
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water heaters.
|
|
|
[GMCnet] Re: A quick easy question for the EFI guys [message #366266 is a reply to message #366260] |
Sat, 21 August 2021 12:00 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Call me as I should have all the parts here.
On Sat, Aug 21, 2021 at 4:51 AM RJW wrote:
> RF_Burns wrote on Fri, 20 August 2021 22:55
>> EBL changed from an RS232 serial connection to a USB connection around
> 2018. The USB cable has a stereo style 1/8" plug on one end that plugs
>> into a female connector on the wiring harness.
>>
>> The previous RS232 cable had a modular cable that plugged in to the EBL.
>
> I must have been sleeping in class when this happened. I didn't know
> about the change. I am wondering what else I missed since I installed my EBL
> over 10 years ago.
> --
> Richard
> 76 Palm Beach
> SE Michigan
> www.PalmBeachGMC.com
>
>
> Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum
> system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water
> heaters.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: A quick easy question for the EFI guys [message #366268 is a reply to message #366245] |
Sat, 21 August 2021 14:04 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Jim,
Thank you. I found the USB cable link in the box. Everything is installing very well.
You guys have been great! Give my best to Nick and Dan.
Thanks again,
Tom K.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
Goto Forum:
Current Time: Sun Sep 29 00:06:22 CDT 2024
Total time taken to generate the page: 0.01488 seconds
|