[GMCnet] Re: WHERE TO INSERT BLOCKING AT THE BOGIES [message #366229 is a reply to message #366226] |
Thu, 19 August 2021 19:33 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma:
|
Senior Member |
|
|
Matt,
Cut a 2x4 15" long and lay it on top of the boggie case and release the
jack,
Since it is not going to be moving much, no need to knotch the ends a
little.
On Thu, Aug 19, 2021 at 3:24 PM Matt Colie wrote:
> g r a n t wrote on Thu, 19 August 2021 15:19
>> Hello! We're heading out for vacation shortly and sadly without the GMC.
> This will be the first time I won't have a chance to re-inflate the bags
>> so I'm looking to put in some wood blocks under the bogies while I am
> away.
>> Apologies but my short search did not come up with a photo of were
> EXACTLY to place the wood blocks.
>> I don't want to mesh anything up. Does anyone have a photo or clear
> description of where to block under the bogies?
>> I have to run up to the storage lot and don't want make several trips.
>>
>> THANK YOU....!
>> G
>
> Grant,
>
> No rocket science here, just place them under that bogie casting. The
> same place you would put a floor jack if you needed to.
>
> Matt
> --
> Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL,
> GMCES
> Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum
> Brakes with Applied Control Arms
> SE Michigan - Near DTW - Twixt A2 and Detroit
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|