Home » Public Forums » GMCnet » New dash underway
|
|
| Re: New dash underway [message #365653 is a reply to message #365648] |
Sat, 24 July 2021 06:11   |
Tom Katzenberger
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
It is very nice and great to have everything in the dash!
Keep up the great work, I am looking forward to the final results.
Take care,
Tom K.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
| [GMCnet] Re: New dash underway [message #365654 is a reply to message #365648] |
Sat, 24 July 2021 09:27 |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
URL no works for me
Sully
Bellevue wa
On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford
wrote:
> Here is a picture of my first trial fit after cutting out all the holes. I
> think it's gonna work.
>
>
> [url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_11.jpg][url]
>
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
|
|
|
|
|
|
|
|
| [GMCnet] Re: New dash underway [message #365663 is a reply to message #365659] |
Sat, 24 July 2021 16:18 |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
That link works.
On Sat, Jul 24, 2021 at 10:29 AM D C _Mac_ Macdonald
wrote:
> As I have posted several times in the past
> the proper way to post URLs is to enclose
> them in parentheses ( ) and hit return to
> then cause underlining of the enclosed URL
> to keep it all together.
>
> D C "Mac" Macdonald
> Amateur Radio K2GKK
> Since 30 November '53
> USAF and FAA, Retired
> Member GMCMI & Classics
> Oklahoma City, OK
> "The Money Pit"
> TZE166V101966
> '76 ex-Palm Beach
> k2gkk + hotmail dot com
> ________________________________
> From: Todd Sullivan
> Sent: Saturday, July 24, 2021 09:27
> To: gmclist@list.gmcnet.org
> Subject: [GMCnet] Re: New dash underway
>
> URL no works for me
>
> Sully
> Bellevue wa
>
> On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford
> wrote:
>
>> Here is a picture of my first trial fit after cutting out all the holes.
> I
>> think it's gonna work.
>>
>>
>> [url=
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.gmcmhphotos.com%2Fphotos%2Fdata%2F7367%2Fmedium%2FDash_11.jpg& ;data=04%7C01%7C%7C1740b75c826f492f655508d94eaf3731%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637627336716522369%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC 4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=2iAqjlo0vimZjaYVx0jFxPeacgsSwN0RcbwG2O4%2BoM0%3D&reserved=0][url
> ]
>>
>> --
>> Greg Crawford
>> KM4ZCR
>> Knoxville, TN
>>
>> "Ruby Sue"
>> 1977 Royale
>> Rear Bath
>> 403 Engine
>> American Eagle Wheels
>> Early Version Alex Sirum Quad bags
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
|
|
| [GMCnet] Re: New dash underway [message #365669 is a reply to message #365664] |
Sun, 25 July 2021 13:18 |
w schurman
Messages: 49
Registered: June 2015
Karma: 1
|
Member |
|
|
This link doesn't work for mr
On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford
wrote:
> That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
> framework behind it. The top cover for the dash will be foam/fiberglass with
> vinyl padding over it. I am completely redoing the air conditioning
> ducting once it leaves the airbox as well as using late model Jeep a/c
> controls.
> The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
> product once fabrication is complete. Here is another picture with some of
> the
> gauges mocked up in it. The factory gauges are held in with fabricated
> aluminum semi circular clamps on the reverse side. I have to order my
> Autometer
> gauges to fill in most of the holes. I already have my double din touch
> screen stereo with Bluetooth and back up camera, which will be switchable so
> that I can turn it on whenever I wish. The smaller rectangular opening on
> the right is for the A/C control panel. The rectangular plastic pieces on
> each side of the column hole are for Carling switches that I got from
> Rocker Switch Pros. You can have the switch actuators custom engraved with
> anything you wish. Depending upon the switch body you select, they will
> have independent lights that light up the writing at the top of the switch,
> for example, when the coach's lights are on, and dependent lights that
> will light up the bottom of the switch when the switch is in the on
> position.
>
>
> ([url=http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
> ])
>
> ([url=
> http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
> ])
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
William S. Schurman
box 772806
Steamboat Springs, CO
80477
1978 Palm Beach
TZE168V100258
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
| [GMCnet] Re: New dash underway [message #365671 is a reply to message #365669] |
Sun, 25 July 2021 14:05 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Me neither
On Sun, Jul 25, 2021 at 11:18 AM w schurman wrote:
> This link doesn't work for mr
>
> On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford
> wrote:
>
>> That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
>> framework behind it. The top cover for the dash will be foam/fiberglass
> with
>> vinyl padding over it. I am completely redoing the air conditioning
>> ducting once it leaves the airbox as well as using late model Jeep a/c
>> controls.
>> The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
>> product once fabrication is complete. Here is another picture with some
> of
>> the
>> gauges mocked up in it. The factory gauges are held in with fabricated
>> aluminum semi circular clamps on the reverse side. I have to order my
>> Autometer
>> gauges to fill in most of the holes. I already have my double din touch
>> screen stereo with Bluetooth and back up camera, which will be
> switchable so
>> that I can turn it on whenever I wish. The smaller rectangular opening
> on
>> the right is for the A/C control panel. The rectangular plastic pieces on
>> each side of the column hole are for Carling switches that I got from
>> Rocker Switch Pros. You can have the switch actuators custom engraved
> with
>> anything you wish. Depending upon the switch body you select, they will
>> have independent lights that light up the writing at the top of the
> switch,
>> for example, when the coach's lights are on, and dependent lights that
>> will light up the bottom of the switch when the switch is in the on
>> position.
>>
>>
>> ([url=
> http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
>> ])
>>
>> ([url=
>>
> http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
>> ])
>> --
>> Greg Crawford
>> KM4ZCR
>> Knoxville, TN
>>
>> "Ruby Sue"
>> 1977 Royale
>> Rear Bath
>> 403 Engine
>> American Eagle Wheels
>> Early Version Alex Sirum Quad bags
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> William S. Schurman
> box 772806
> Steamboat Springs, CO
> 80477
> 1978 Palm Beach
> TZE168V100258
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| [GMCnet] Re: New dash underway [message #365672 is a reply to message #365648] |
Sun, 25 July 2021 14:13 |
powwerjon
Messages: 849
Registered: March 2013
Karma: -2
|
Senior Member |
|
|
Also unable to open the photos
JR Wright
> On Jul 25, 2021, at 3:05 PM, Jim Kanomata wrote:
>
> Me neither
>
>
> On Sun, Jul 25, 2021 at 11:18 AM w schurman wrote:
>
>> This link doesn't work for mr
>>
>> On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford
>> wrote:
>>
>>> That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
>>> framework behind it. The top cover for the dash will be foam/fiberglass
>> with
>>> vinyl padding over it. I am completely redoing the air conditioning
>>> ducting once it leaves the airbox as well as using late model Jeep a/c
>>> controls.
>>> The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
>>> product once fabrication is complete. Here is another picture with some
>> of
>>> the
>>> gauges mocked up in it. The factory gauges are held in with fabricated
>>> aluminum semi circular clamps on the reverse side. I have to order my
>>> Autometer
>>> gauges to fill in most of the holes. I already have my double din touch
>>> screen stereo with Bluetooth and back up camera, which will be
>> switchable so
>>> that I can turn it on whenever I wish. The smaller rectangular opening
>> on
>>> the right is for the A/C control panel. The rectangular plastic pieces on
>>> each side of the column hole are for Carling switches that I got from
>>> Rocker Switch Pros. You can have the switch actuators custom engraved
>> with
>>> anything you wish. Depending upon the switch body you select, they will
>>> have independent lights that light up the writing at the top of the
>> switch,
>>> for example, when the coach's lights are on, and dependent lights that
>>> will light up the bottom of the switch when the switch is in the on
>>> position.
>>>
>>>
>>> ([url=
>> http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
>>> ])
>>>
>>> ([url=
>>>
>> http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
>>> ])
>>> --
>>> Greg Crawford
>>> KM4ZCR
>>> Knoxville, TN
>>>
>>> "Ruby Sue"
>>> 1977 Royale
>>> Rear Bath
>>> 403 Engine
>>> American Eagle Wheels
>>> Early Version Alex Sirum Quad bags
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> William S. Schurman
>> box 772806
>> Steamboat Springs, CO
>> 80477
>> 1978 Palm Beach
>> TZE168V100258
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
|
| Re: New dash underway [message #365675 is a reply to message #365648] |
Sun, 25 July 2021 19:00 |
Greg C.
Messages: 224
Registered: October 2019
Location: Knoxville, TN
Karma: 0
|
Senior Member |
|
|
I'm sorry guys. I used the instructions from the sticky "Best Way Ever to Embed Pictures in the Forum". The pictures show up fine in the forum on my end. If someone can tell me what I am doing wrong, I will be glad to try and fix it.
Greg Crawford
KM4ZCR
Knoxville, TN
"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags
|
|
|
|
|
|
| [GMCnet] Re: New dash underway [message #365681 is a reply to message #365672] |
Mon, 26 July 2021 09:53 |
Keith V
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
ttry this link:
http://www.gmcmhphotos.com/photos/interior/p68266-dash-2.html
[http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg]
Dash 2
Dash with most holes mocked up.
www.gmcmhphotos.com
________________________________
From: John Wright
Sent: Sunday, July 25, 2021 2:13 PM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: New dash underway
Also unable to open the photos
JR Wright
> On Jul 25, 2021, at 3:05 PM, Jim Kanomata wrote:
>
> Me neither
>
>
> On Sun, Jul 25, 2021 at 11:18 AM w schurman wrote:
>
>> This link doesn't work for mr
>>
>> On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford
>> wrote:
>>
>>> That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
>>> framework behind it. The top cover for the dash will be foam/fiberglass
>> with
>>> vinyl padding over it. I am completely redoing the air conditioning
>>> ducting once it leaves the airbox as well as using late model Jeep a/c
>>> controls.
>>> The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
>>> product once fabrication is complete. Here is another picture with some
>> of
>>> the
>>> gauges mocked up in it. The factory gauges are held in with fabricated
>>> aluminum semi circular clamps on the reverse side. I have to order my
>>> Autometer
>>> gauges to fill in most of the holes. I already have my double din touch
>>> screen stereo with Bluetooth and back up camera, which will be
>> switchable so
>>> that I can turn it on whenever I wish. The smaller rectangular opening
>> on
>>> the right is for the A/C control panel. The rectangular plastic pieces on
>>> each side of the column hole are for Carling switches that I got from
>>> Rocker Switch Pros. You can have the switch actuators custom engraved
>> with
>>> anything you wish. Depending upon the switch body you select, they will
>>> have independent lights that light up the writing at the top of the
>> switch,
>>> for example, when the coach's lights are on, and dependent lights that
>>> will light up the bottom of the switch when the switch is in the on
>>> position.
>>>
>>>
>>> ([url=
>> http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
>>> ])
>>>
>>> ([url=
>>>
>> http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
>>> ])
>>> --
>>> Greg Crawford
>>> KM4ZCR
>>> Knoxville, TN
>>>
>>> "Ruby Sue"
>>> 1977 Royale
>>> Rear Bath
>>> 403 Engine
>>> American Eagle Wheels
>>> Early Version Alex Sirum Quad bags
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> William S. Schurman
>> box 772806
>> Steamboat Springs, CO
>> 80477
>> 1978 Palm Beach
>> TZE168V100258
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
|
|
|
|
|
| Re: New dash underway [message #365813 is a reply to message #365648] |
Sun, 01 August 2021 15:32 |
Greg C.
Messages: 224
Registered: October 2019
Location: Knoxville, TN
Karma: 0
|
Senior Member |
|
|
They are all on the photo site. I was merely posting the pictures per the instructions on the sticky so folks wouldn't have to go to the photo site. I guess it's just one more click...
Greg Crawford
KM4ZCR
Knoxville, TN
"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags
|
|
|
|
| [GMCnet] Re: New dash underway [message #365817 is a reply to message #365813] |
Sun, 01 August 2021 16:19 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Greg, If you'll just edit off the prefixes before "http..." and the
suffixes after "...jpg", the links will work.
Ken H.
On Sun, Aug 1, 2021 at 4:32 PM Greg Crawford
wrote:
> They are all on the photo site. I was merely posting the pictures per the
> instructions on the sticky so folks wouldn't have to go to the photo site. I
> guess it's just one more click...
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
Goto Forum:
Current Time: Fri Sep 20 03:46:40 CDT 2024
Total time taken to generate the page: 0.10255 seconds
|
GMCforum
Search
Help
Register
Login
Home
[url]
[url])
[url])
[url]
[url]
[url]
