Head Bolt Location [message #365379] |
Mon, 12 July 2021 13:26 |
TR 1
Messages: 348 Registered: August 2015 Location: DFW
Karma: -7
|
Senior Member |
|
|
So I took pictures of all of this when I disassembled my motor, but of course my phone crapped out and they were not captured in the backup....
So my coach as 4 head bolts with a threaded stud mounted on the top (which I believe is normal... 2 long, and 2 short.... Pretty sure the short ones go up front, but I want to say the long ones go in the 3rd bolt hole from the front... Does that sound correct? My memory's not what it used to be (thus the need for the pictures) but of course Murphy had to go and erase my phone...
Mark S. '73 Painted Desert,
Manny 1 Ton Front End,
Howell Injection,
Leigh Harrison 4bag and Rear Brakes,
Fort Worth, TX
|
|
|
Re: Head Bolt Location [message #365477 is a reply to message #365379] |
Fri, 16 July 2021 14:20 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Sir, short in the front and long in the 2nd hole.
http://www.gmcmhphotos.com/photos/texas/p57888-roller-tip-rockers.html
TR 1 wrote on Mon, 12 July 2021 14:26So I took pictures of all of this when I disassembled my motor, but of course my phone crapped out and they were not captured in the backup....
So my coach as 4 head bolts with a threaded stud mounted on the top (which I believe is normal... 2 long, and 2 short.... Pretty sure the short ones go up front, but I want to say the long ones go in the 3rd bolt hole from the front... Does that sound correct? My memory's not what it used to be (thus the need for the pictures) but of course Murphy had to go and erase my phone...
C. Boyd
76 Crestmont
East Tennessee
|
|
|