[GMCnet] Rear Hub/drum/rotor diameter [message #364999] |
Fri, 25 June 2021 20:31 |
Russell Mehlenbacher
Messages: 128 Registered: June 2010
Karma: 1
|
Senior Member |
|
|
I am looking forward to letting my SIL machine a new set of rear rotors for
my TSM disc conversion. I would like to confirm my search findings. I found
one place where it is described as a 3.9 id.
Too big me thinks.
3.09 got a mention as well. Correct?
Thank you for your opinions!
Russell Mehlenbacher
Rochester Hills, MI
76 Eleganza
74 Sequoia
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Russ & Linda Mehlenbacher
Rochester Hills, Michigan
'76 Eleganza
'74 Sequoia
|
|
|
|
|
|
Re: [GMCnet] Re: Rear Hub/drum/rotor diameter [message #365130 is a reply to message #365040] |
Tue, 29 June 2021 19:09 |
cadelec
Messages: 303 Registered: September 2011 Location: Brisbane Australia
Karma: 1
|
Senior Member |
|
|
Emery thanks
but i think i have all the info i need
i am unsure of when Bobby installed this system but i found this article in a google search
so i assume prior to 1998 http://www.henry-davis.com/GMC/Sandy/discbrake.htm
this system he put on has long changed
originally i believe bobby put on 4 eldroado calipers and discs connected
to a electric seat actuator mounted in front of the fuel tanks that was
controlled by a switch in the wall beside the drivers seat
when he passed the coach was sold to a guy called Chester
in indiana who replaced the calipers with standard 80mm calipers
we then purchased the coach from Chester and shipped to Australia.
here we had to have a working handbrake so i swapped out the rear discs
for a set of drums and installed an original handbrake lever to actuate the drums.
on our last trip one caliper dragged and scoured up the disc.
i have since measured all of the discs and they are below the wear limits
so i have ordered new eldorado discs from rock auto. i will machine these myself
using the discs currently on the coach and the document posted earlier for reference
i believe that i will need to enlarge the hub hole which will be different for the fronts compared to the back I
I also have a spare disc that came with the coach but it too is on the limit of wear at 1.170 inches
Trevor
Brisbane Australia
Siesta Koala 76 Edgemont (old Bobby Moores)
71 Cadillac Eldo Convert
58 Cadillac Eldorado Brougham Project
|
|
|