| Blower motor cooling hose [message #364936] |
Wed, 23 June 2021 15:55  |
kwharland
Messages: 246
Registered: November 2005
Location: Central Florida
Karma: 0
|
Senior Member |
|
|
I replaced the blower motor and was surprised to find it's a generic part available at many local parts stores but is the cooling hose also commonly available? Mine was rotted away and I no longer have it to try and match to something else.
1978 Eleganza II
|
|
|
|
| Re: Blower motor cooling hose [message #364938 is a reply to message #364936] |
Wed, 23 June 2021 18:44  |
JohnL455
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
Lots of variants of that hose were used for decades on GM vehicles. What you really need is the motor end with that molded flange. They were all the same, The lengths and bends of rubber varied by car series. I suggest the junk yard and perhaps cutting and joining with some tube couplers if it needs adjustment to fit.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
