Brake Caliper Guide Pin Boot Kit [message #364105] |
Tue, 18 May 2021 07:25 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Good morning all,
I purchased the Phase II brake kit from Jim at Applied. I need the brake caliper guide pin boot kit to replace the missing and old grommets.
It is not worth the postage, as the parts are too cheap and locally available. Does anyone know what model or GM part number the 80MM front and rear calipers are. Or, what vehicle and year they came off of?
Thanks again,
Tom
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
Re: Brake Caliper Guide Pin Boot Kit [message #364116 is a reply to message #364105] |
Tue, 18 May 2021 16:40 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Thank you Larry,
Will Do and I appreciate the help.
You guys take care.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
|
Re: Brake Caliper Guide Pin Boot Kit [message #364160 is a reply to message #364105] |
Fri, 21 May 2021 17:52 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I'm thinking Advance gave memore than that for mine. Just under a hundred for both if memory serves.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|