GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Centering the steering box (what does that mean?)
Re: [GMCnet] Re: Centering the steering box [message #363625 is a reply to message #363624] Thu, 22 April 2021 23:16 Go to previous messageGo to previous message
Bill Van Vlack is currently offline  Bill Van Vlack   United States
Messages: 419
Registered: September 2015
Location: Guemes Island, Washington
Karma:
Senior Member
DJ Eberhart in Oregon can supply those M8 bolts with a flat that is ground to match the openings in the adjusters, along with the longer nut. If your coach has the OEM adjusters with a chamfer on the inside circumference that matches the radius made when the brackets were bent into place, you're in good shape. If you have the aftermarket set that is simply a disc, the flats are ground deeper than stock and easily stripped. The lack of a chamfer does not allow the adjusters to spin as the bolt is tightened and they turn into cups as the edge lands on the bracket radius rather than flat against the control arm.

Alex Ferrara also supplied them and may still. DJ bought up a bunch of used OEM adjusters from scrapped coaches and sells the complete set or the individual parts. The Moog sets will not work.

Good luck, and congrats on finding the issue.


Bill Van Vlack '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: No contact temp sensor
Next Topic: Fuel sending unit lock ring wrench
Goto Forum:
  


Current Time: Mon Jul 08 02:04:29 CDT 2024

Total time taken to generate the page: 0.00807 seconds