| Band it Tool Torque [message #363068] |
Fri, 26 March 2021 12:47  |
Tom Katzenberger
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma:
|
Senior Member |
|
|
Guys,
I serviced the Steering lower shaft CV Joint and accidentally dropped the bearings out of the bottom. I sat for a half hour rotating the inner sprocket and reinstalling the bearings until I got a smooth operation while swiveling the CV joint. I greased the joint up with Valvoline Full Synthetic Moly grease as directed and now I need to secure the new boot.
Using a "Band It" tool and 1/4" straps to secure the steering shaft boot, what torque should be applied to this small boot and should I double band?
Thanks,
Tom
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
