| multiple coolent temp sensors [message #362973] |
Tue, 23 March 2021 10:37  |
lqqkatjon
Messages: 2324
Registered: October 2010
Location: St. Cloud, MN
Karma:
|
Senior Member |
|
|
years back, I removed the christmas tree vacuum switch, and installed a analog coolent temp guage/sensor. it was very accurate and served me well for many years.
When I installed my EBL-EFI system, I pulled that sensor out, and left it dangling on the manifold with a zip tie. and used that spot to install the sensor for my EFI system.
I am now having some issues with the EBL whats up display, and without that the only temp display I have is the original dash gauge that is still located in the stock location.
I want to install the analog sensor again.. I have not removed the gauge itself. but I don't want to loose the stock sensor, and I can't loose the efi sensor. has anybody found a Y, or does a person just go buy a bunch of crappy brass parts and make some sort of T fitting? I don't want to make any higher of a spot for coolant to be off the manifold.
what happens if you T off he electrical sensor to feed both the EBL and the stock gauge? I am guessing that won't work right?
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
