[GMCnet] Re: Guess what’s coming to Chez Denney [message #362965 is a reply to message #362964] |
Tue, 23 March 2021 06:51 |
Richard Denney
Messages: 920 Registered: April 2010
Karma:
|
Senior Member |
|
|
Ken, do you have dimensions from the “dock” edge to the front supports?
I’ll probably use square tubing.
I may have to retrofit that part. Concrete contractor will start probably
week after next, but I have to run to Texas for a few weeks. My father
passed away in early January and we need to do the next round of stuff.
I’ll talk with the concrete guy this afternoon. Good guy.
I’m hammered with online stuff all day today but evenings are free. Seven
oh three six too 3 five six 6 ate.
Rick “endless online meetings these days” Denney
On Tue, Mar 23, 2021 at 6:05 AM Ken Henderson
wrote:
> Hey, Rick,
>
> Wonderful!!! I'm blue with envy -- even 'tho' I'd no longer use it much.
> :-)
>
> Be sure to have "sockets" set in the floor of the "loading dock" for the
> ramp support posts. Mine are, IIRC, 4" ID and 18" deep with 1-1/2" x 18"
> angle iron "feet" welded across the bottom. 24" square concrete around
> each of those two below the slab. Perhaps over-designed, but I don't worry
> at all about the support for the front of the GMC -- I probably put the
> back end of the big diesel pusher on there if I stll had it.
>
> By the way, I tried to call you a couple of times lately with no answer.
> I'll keep trying. I'm curious how the carpenter bee traps are working out
> ... just had to rehang mine.
>
> Ken H.
>
>
> On Mon, Mar 22, 2021 at 11:11 PM Richard Denney
> wrote:
>
>> I should have added that the elevations came from the Amish company
>> building the structure. The site is sloped, and the rear elevation shed
>> roof covers a 10x60 pad that is 42” below the level of the interior
> floor.
>> That is what makes the “loading dock” work in the Ken style. I have a
>> welding friend who I will get to make the ramps.
>>
>> 6” dead level slab under that bay, in case I ever want to install a lift.
>>
>> Rick “starting to think about wiring” Denney
>>
>> On Mon, Mar 22, 2021 at 11:04 PM Richard Denney
>> wrote:
>>
>>> Or, how I’ve been spending my Covid home time.
>>>
>>> Plan:
>>>
>>> http://www.gmcmhphotos.com/photos/misc/p68107-new-shop.html
>>>
>>> Rear:
>>>
>>> http://www.gmcmhphotos.com/photos/misc/p68105-new-shop.html
>>>
>>> Front:
>>>
>>> http://www.gmcmhphotos.com/photos/misc/p68106-new-shop.html
>>>
>>> No more losing screws in the gravel driveway.
>>>
>>> Pre-construction meeting tomorrow. Permit issued on Friday.
>>>
>>> You don’t even want to know how much this costs in Northern Virginia.
>>>
>>> Radiant heat in the floor, 2” of sprayed-on closed cell foam
> insulation.
>>>
>>> “Loading Dock” inspired by Ken H.
>>>
>>> Rick “ready to get back in circulation” Denney
>>>
>>> --
>>> '73 X-Glacier 230 "Jaws"
>>> Northern Virginia
>>> Offlist email: rick at rickdenney dot com
>>>
>> --
>> '73 X-Glacier 230 "Jaws"
>> Northern Virginia
>> Offlist email: rick at rickdenney dot com
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
'73 X-Glacier 230 "Jaws"
Northern Virginia
Offlist email: rick at rickdenney dot com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|