[GMCnet] Re: EFI [message #362841 is a reply to message #362837] |
Mon, 15 March 2021 20:29 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma:
|
Senior Member |
|
|
Dean,
I don't understand the problem: IIRC, when I had the 455 with OEM
manifold, the Holly Throttle Body and later the GM TB, was no taller than
the Quadrajet and so did not require raising the hatch cover.
Even with the taller Cad500 installed with the GM TB, I've only had to
slightly raise about a 1/2" high aluminum dome over the cutaway plywood
hatch cover.
Even when I bought the GMC with a Quadrajet on the 455 with an Edelbrock
Performer manifold, the hatch was raised by only about 4". I have to
wonder what manifold your friend is using that's even taller than that one.
Ken H.
On Mon, Mar 15, 2021 at 7:41 PM Hanson Email wrote:
> Anyone know of a very low profile intake manifold for an EFI that will keep
> the doghouse from raising its ugly head? Right now the cover raise is about
> 6 inches. Thank you PO.
>
> This is for a friend as I am a quad guy.
>
>
>
> Dean The Resourceful Norse Hanson
>
> 75 Avion
>
> 73 Painted Desert.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|