Home » Public Forums » GMCnet » [GMCnet] Increased Caster
[GMCnet] Increased Caster [message #361748] |
Thu, 14 January 2021 10:42 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Time for a survey of those using Dave Lenzi's upper A-arms modified for
increased caster:
What's your opinion after using them for a while? Do they significantly
increase the steering stability? Did you try the offset bushings before
going to modified A-arms? How do they compare? Did either affect the
steering effort significantly? Which is the "better buy" -- or is either
worth the trouble/cost?
Thanks for your opinions.
Ken H.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Increased Caster [message #361753 is a reply to message #361748] |
Thu, 14 January 2021 14:24 |
lqqkatjon
Messages: 2324 Registered: October 2010 Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
This is a project that is on my "want" list, but I do not want to do the labor yet, so not sure if it will happen sometime in the near future. I am thinking for sure steering box this year, since I have one, and the electric wiper kit. I also want to put a beefier track bar in. After that it is time to look at bushings and adding that caster.
There are GMC owners that really like the offset bushings. I have heard real good things about Dave's arms, however I am under the impression that they are no longer available. Maybe you have some? There is a GMC that has a bad frame and engine here in MN that has a set of Dave's arms on it, and someone was discussing buying that coach just for the Arms because he mentioned Dave no longer does the arms.
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|
Re: [GMCnet] Increased Caster [message #361756 is a reply to message #361753] |
Thu, 14 January 2021 14:43 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Last word I heard was that Dave is willing to do TWO pair, but would rather
not fool with just one pair -- probably has to do with the labor of setting
up the jigs, I'd guess. I know of one person who's probably ready. Maybe
if someone else chimes in, they can get together and strike a deal with
Dave -- or more might be better.
Ken H.
On Thu, Jan 14, 2021 at 3:25 PM Jon Roche via Gmclist <
gmclist@list.gmcnet.org> wrote:
> This is a project that is on my "want" list, but I do not want to do the
> labor yet, so not sure if it will happen sometime in the near future. I am
> thinking for sure steering box this year, since I have one, and the
> electric wiper kit. I also want to put a beefier track bar in. After that
> it is
> time to look at bushings and adding that caster.
>
>
>
>
> There are GMC owners that really like the offset bushings. I have heard
> real good things about Dave's arms, however I am under the impression that
> they are no longer available. Maybe you have some? There is a GMC that
> has a bad frame and engine here in MN that has a set of Dave's arms on it,
> and someone was discussing buying that coach just for the Arms because he
> mentioned Dave no longer does the arms.
>
>
>
> --
> Jon Roche
> 75 palm beach
> EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
> St. Cloud, MN
> http://lqqkatjon.blogspot.com/
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Increased Caster [message #361757 is a reply to message #361756] |
Thu, 14 January 2021 15:15 |
James Hupy
Messages: 6806 Registered: May 2010
Karma: -62
|
Senior Member |
|
|
I have installed offset bushings on stock front ends as part of a repair of
the entire front end, and also in 1 ton conversions. They are nearly always
capable of allowing 5° of camber. That is probably the maximum that you
need. Any more, and the steering box will groan in protest. If you feel
that you need more than that to make your coach go "hands off" straight
down the road, look elsewhere for your problem. Worn bogie pins and
bushings will give your coach a bad case of the "wig wags" as will bent
bogie arms. This will be felt in the seat of your pants, and is often
followed by minor corrections with your hands on the steering wheel. Then
the assumption will be made that the problem lies with the front end parts.
So, do not forget the rear wheels when chasing steering problems.
As for Dave's control arms, I have no experience with them.
Jim Hupy
Salem, Oregon
On Thu, Jan 14, 2021, 12:44 PM Ken Henderson via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Last word I heard was that Dave is willing to do TWO pair, but would rather
> not fool with just one pair -- probably has to do with the labor of setting
> up the jigs, I'd guess. I know of one person who's probably ready. Maybe
> if someone else chimes in, they can get together and strike a deal with
> Dave -- or more might be better.
>
> Ken H.
>
> On Thu, Jan 14, 2021 at 3:25 PM Jon Roche via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> This is a project that is on my "want" list, but I do not want to do the
>> labor yet, so not sure if it will happen sometime in the near future.
> I am
>> thinking for sure steering box this year, since I have one, and the
>> electric wiper kit. I also want to put a beefier track bar in. After
> that
>> it is
>> time to look at bushings and adding that caster.
>>
>>
>>
>>
>> There are GMC owners that really like the offset bushings. I have
> heard
>> real good things about Dave's arms, however I am under the impression
> that
>> they are no longer available. Maybe you have some? There is a GMC
> that
>> has a bad frame and engine here in MN that has a set of Dave's arms on
> it,
>> and someone was discussing buying that coach just for the Arms because he
>> mentioned Dave no longer does the arms.
>>
>>
>>
>> --
>> Jon Roche
>> 75 palm beach
>> EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
>> St. Cloud, MN
>> http://lqqkatjon.blogspot.com/
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Increased Caster [message #361758 is a reply to message #361748] |
Thu, 14 January 2021 15:38 |
Larry
Messages: 2875 Registered: January 2004 Location: Menomonie, WI
Karma: 10
|
Senior Member |
|
|
I did my front end back in 2007 or so, before Dave was doing the upper arms. So after confiring with Steve Ferguson, who was the expert at the time, I installed the offset bushings. Had access through a GMC friend to the GM tools to do the job. When I do check my alignment, I now can get 4* on one side and 3.5* caster on the other. Between that and setting the steering box on high point, steering is one handed. (though I mostly have two on the wheel...just because I should...) Installing offset bushings is a time consuming job, but IMO because of the difference in cost, worth the effort to try it. After doing it, I did notice a positive difference in handling. But that may have been cumulative of all of the other stuff I did at the time. JMHO
Larry
78 Royale w/500 Caddy
Menomonie, WI.
|
|
|
Re: [GMCnet] Increased Caster [message #361762 is a reply to message #361748] |
Thu, 14 January 2021 17:00 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
FWIW I got about 4 deg on a 77 with no offset bushings. Of course one side was limiting factor and I stopped where camber would start to go negative. If I could find the scrap of cardboard I was using as a note sheet in the process I could give exact numbers, but was several years ago. Numbers don’t lie as equal caster gave a road test with no pull hands off wheel first try.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
Re: [GMCnet] Increased Caster [message #361766 is a reply to message #361762] |
Thu, 14 January 2021 19:02 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
I hate you all. With offset upper bushings we had to work to get zero caster
________________________________
From: Gmclist on behalf of John R. Lebetski via Gmclist
Sent: Thursday, January 14, 2021 5:00 PM
To: gmclist@list.gmcnet.org
Cc: John R. Lebetski
Subject: Re: [GMCnet] Increased Caster
FWIW I got about 4 deg on a 77 with no offset bushings. Of course one side was limiting factor and I stopped where camber would start to go negative.
If I could find the scrap of cardboard I was using as a note sheet in the process I could give exact numbers, but was several years ago. Numbers
don’t lie as equal caster gave a road test with no pull hands off wheel first try.
--
John Lebetski
Woodstock, IL
77 Eleganza II
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
|
Re: [GMCnet] Increased Caster [message #361772 is a reply to message #361771] |
Thu, 14 January 2021 21:39 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Sir, or possibly got caster and camber mixed up?
Larry wrote on Thu, 14 January 2021 22:11Keith V wrote on Thu, 14 January 2021 19:02
I hate you all. With offset upper bushings we had to work to get zero caster
Hummm. Never heard of this...... Is it possible that you put the bushings in wrong?
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
Re: [GMCnet] Increased Caster [message #361783 is a reply to message #361748] |
Thu, 14 January 2021 23:07 |
bwevers
Messages: 597 Registered: October 2010 Location: San Jose
Karma: 5
|
Senior Member |
|
|
The increase in caster won't cure the bump steer in the one ton conversion.
Bill Wevers GMC49ers, GMC Western States
1975 Glenbrook - Manny Powerdrive, OneTon
455 F Block, G heads
San Jose
|
|
|
Re: [GMCnet] Increased Caster [message #361784 is a reply to message #361766] |
Thu, 14 January 2021 23:32 |
sgltrac
Messages: 2797 Registered: April 2011
Karma: 1
|
Senior Member |
|
|
Did you put them in the correct holes? ;)
Sully
Bellevue wa
On Thu, Jan 14, 2021 at 5:02 PM Keith V via Gmclist
wrote:
> I hate you all. With offset upper bushings we had to work to get zero
> caster
> ________________________________
> From: Gmclist on behalf of John R.
> Lebetski via Gmclist
> Sent: Thursday, January 14, 2021 5:00 PM
> To: gmclist@list.gmcnet.org
> Cc: John R. Lebetski
> Subject: Re: [GMCnet] Increased Caster
>
> FWIW I got about 4 deg on a 77 with no offset bushings. Of course one side
> was limiting factor and I stopped where camber would start to go negative.
> If I could find the scrap of cardboard I was using as a note sheet in the
> process I could give exact numbers, but was several years ago. Numbers
> don’t lie as equal caster gave a road test with no pull hands off wheel
> first try.
> --
> John Lebetski
> Woodstock, IL
> 77 Eleganza II
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
Re: [GMCnet] Increased Caster [message #361838 is a reply to message #361748] |
Tue, 19 January 2021 07:43 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Ken, I went from offset bushings (<2.0 degrees caster) to Dave's upper control arms (UCA) (5.0 degrees caster) on Double Trouble (1975 Avion). If I'm on the freeway I can let go of the wheel and the coach will very slowly drift into the soft shoulder. I mean VERY slowly! They definitely helped the stability. Neither effected the steering effort. Offset bushings are WAY cheaper than Dave's UCA. R & Ring the UCA isn't a big job since they merely locate the upper ball joint and carry no weight. I would suggest that a GMC owner try the offset bushings first and see if the steering improves to a level they like or can live with and if not then go for Dave's UCA.
Here's a link to pictures of Dave's UCA: http://www.gmcmhphotos.com/photos/g5861-dave-lenzi-27s-offset-upper-control-arms.html
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
[Updated on: Tue, 19 January 2021 08:00] Report message to a moderator
|
|
|
|
Re: [GMCnet] Increased Caster [message #361866 is a reply to message #361771] |
Wed, 20 January 2021 08:26 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
knowing me its highly likely. I'll check in the summer.
But my recollection is that the caster is better now than it was.
Also Yes caster not camber
________________________________
From: Gmclist on behalf of Larry via Gmclist
Sent: Thursday, January 14, 2021 9:11 PM
To: gmclist@list.gmcnet.org
Cc: Larry
Subject: Re: [GMCnet] Increased Caster
Keith V wrote on Thu, 14 January 2021 19:02
> I hate you all. With offset upper bushings we had to work to get zero caster
Hummm. Never heard of this...... Is it possible that you put the bushings in wrong?
--
Larry
78 Royale w/500 Caddy
Menomonie, WI.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
Re: [GMCnet] Increased Caster [message #361867 is a reply to message #361866] |
Wed, 20 January 2021 09:28 |
Larry
Messages: 2875 Registered: January 2004 Location: Menomonie, WI
Karma: 10
|
Senior Member |
|
|
Keith V wrote on Wed, 20 January 2021 08:26knowing me its highly likely. I'll check in the summer.
But my recollection is that the caster is better now than it was.
Also Yes caster not camber
________________________________
From: Gmclist on behalf of Larry via Gmclist
Sent: Thursday, January 14, 2021 9:11 PM
To: gmclist@list.gmcnet.org
Cc: Larry
Subject: Re: [GMCnet] Increased Caster
Keith V wrote on Thu, 14 January 2021 19:02
> I hate you all. With offset upper bushings we had to work to get zero caster
Hummm. Never heard of this...... Is it possible that you put the bushings in wrong?
--
Larry
78 Royale w/500 Caddy
Menomonie, WI.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Keith, I almost put them in wrong. Spent a lot of time in email and phone calls with Steve Ferguson before I understood the geometry. That was 2005, so CRS has taken over relative to the proper install of the offset bushings. Maybe someone who has done this recently or many times could speak up here.
Larry
78 Royale w/500 Caddy
Menomonie, WI.
|
|
|
Re: [GMCnet] Increased Caster [message #361868 is a reply to message #361748] |
Wed, 20 January 2021 10:07 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
If you put in the bushings, have the cams at max, and can only get zero, you put them in backwards. You want the rear of the upper arm to move INBOARD. That moves the upper ball joint rearward.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
Re: [GMCnet] Increased Caster [message #361870 is a reply to message #361868] |
Wed, 20 January 2021 11:42 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
That would be great! I definitely will be checking after the snow melts.
I do understand steering geometry so I want to believe I did it right. But I'm also very good and making stupid mistakes
________________________________
From: Gmclist on behalf of John R. Lebetski via Gmclist
Sent: Wednesday, January 20, 2021 10:07 AM
To: gmclist@list.gmcnet.org
Cc: John R. Lebetski
Subject: Re: [GMCnet] Increased Caster
If you put in the bushings, have the cams at max, and can only get zero, you put them in backwards. You want the rear of the upper arm to move
INBOARD. That moves the upper ball joint rearward.
--
John Lebetski
Woodstock, IL
77 Eleganza II
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
Re: [GMCnet] Increased Caster [message #361876 is a reply to message #361748] |
Wed, 20 January 2021 20:01 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
I've got another question (or more) for this survey:
1. Is it feasible to use offset bushings in both the rear AND front of the
upper A-arms? Seems to me it should be perfectly OK and potentially give
about twice as much caster increase as using them only in the rear.
2. Seems to me installing the offset bushing in the rear, to increase
caster, would inevitably tend to move camber toward negative. By the same
rationale, using offset bushings front and rear would have less effect on
camber because the front would tend toward positive camber about equal to
the rear's negative effect.
3. Has anyone considered or tried the offset upper A-arm shafts? Like
this:
bit.ly/3obunmp
or
https://www.globalwest.net/billet-steel-stock-upper-control-arm-offset-cross-shaft-camaro-67-68-69-global-west.html
I have no idea whether those are available to fit the GMC, but we've got
plenty of folks capable of designing and building them. It might be easier
than modifying A-arms, as Lenzi does. What are the pros & cons?
4. Other options?
Rest assured, I'm just trying to learn something here -- I'm happy with my
1-ton front end -- and it was installed before Manny decided to increase
the caster. (I THINK I did use offset bushings in the rear though -- tooo
long ago for my old memory to be sure.)
Thanks for all your inputs/ideas.
Ken H.
On Thu, Jan 14, 2021 at 11:42 AM Ken Henderson
wrote:
> Time for a survey of those using Dave Lenzi's upper A-arms modified for
> increased caster:
>
> What's your opinion after using them for a while? Do they significantly
> increase the steering stability? Did you try the offset bushings before
> going to modified A-arms? How do they compare? Did either affect the
> steering effort significantly? Which is the "better buy" -- or is either
> worth the trouble/cost?
>
> Thanks for your opinions.
>
> Ken H.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Re: [GMCnet] Increased Caster [message #361879 is a reply to message #361876] |
Wed, 20 January 2021 21:00 |
Ken Henderson
Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Well, I guess I've had my head screwed on backward for quite some time:
I've been thinking, and discussing, the use of offset bushings in the UPPER
REAR of the upper A-arm. Tonight, I've been researching offset bushing
part numbers. LO and BEHOLD: Moog (and everyone else) ONLY mentions
eccentric (offset) bushings for the upper FRONT! NOT the rear! Holy Moly,
why hasn't someone called me on that? Or have we GMCers been "doing our
own thing"?
Here are the ONLY Moog part numbers I've found for '76 Toronado (and by
extension GMCMH):
Standard Offset(Eccentric)
Upper Front K7006 K7104
Upper Rear K6111
Lower Front K5222
Lower Rear K6116
Does this mean that the K7104 will ONLY fit the Upper Front, or merely that
that's where they're recommended (but CAN fit the rear?).
Come on, somebody straighten this mess out.
Ken H.
On Wed, Jan 20, 2021 at 9:01 PM Ken Henderson
wrote:
> I've got another question (or more) for this survey:
>
> 1. Is it feasible to use offset bushings in both the rear AND front of
> the upper A-arms? Seems to me it should be perfectly OK and potentially
> give about twice as much caster increase as using them only in the rear.
>
> 2. Seems to me installing the offset bushing in the rear, to increase
> caster, would inevitably tend to move camber toward negative. By the same
> rationale, using offset bushings front and rear would have less effect on
> camber because the front would tend toward positive camber about equal to
> the rear's negative effect.
>
> 3. Has anyone considered or tried the offset upper A-arm shafts? Like
> this:
> bit.ly/3obunmp
> or
>
> https://www.globalwest.net/billet-steel-stock-upper-control-arm-offset-cross-shaft-camaro-67-68-69-global-west.html
>
> I have no idea whether those are available to fit the GMC, but we've got
> plenty of folks capable of designing and building them. It might be easier
> than modifying A-arms, as Lenzi does. What are the pros & cons?
>
> 4. Other options?
>
> Rest assured, I'm just trying to learn something here -- I'm happy with my
> 1-ton front end -- and it was installed before Manny decided to increase
> the caster. (I THINK I did use offset bushings in the rear though -- tooo
> long ago for my old memory to be sure.)
>
> Thanks for all your inputs/ideas.
>
> Ken H.
>
>
> On Thu, Jan 14, 2021 at 11:42 AM Ken Henderson
> wrote:
>
>> Time for a survey of those using Dave Lenzi's upper A-arms modified for
>> increased caster:
>>
>> What's your opinion after using them for a while? Do they significantly
>> increase the steering stability? Did you try the offset bushings before
>> going to modified A-arms? How do they compare? Did either affect the
>> steering effort significantly? Which is the "better buy" -- or is either
>> worth the trouble/cost?
>>
>> Thanks for your opinions.
>>
>> Ken H.
>>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
Goto Forum:
Current Time: Sun Oct 06 02:13:34 CDT 2024
Total time taken to generate the page: 0.01225 seconds
|