Height Control Valve Link Assembly [message #361578] |
Sat, 09 January 2021 16:50 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Can I steel the parts and size information from someone with regard to the Height Control Valve Link Assembly? I am looking to fab one using (2) rod ends, jamb nuts and a long hex fitting. I sure many have already constructed this many times over in the past.
Thanks all and take care,
Tom
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
Re: Height Control Valve Link Assembly [message #361579 is a reply to message #361578] |
Sat, 09 January 2021 16:52 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma: 4
|
Senior Member |
|
|
Guys,
I am very sorry for the duplicate posts. Computer issue on my end.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
Re: Height Control Valve Link Assembly [message #361580 is a reply to message #361578] |
Sat, 09 January 2021 17:00 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Sir, I used adjustable turn buckles from Home Depot. 1/4” I think.
Tom Katzenberger wrote on Sat, 09 January 2021 17:50Can I steel the parts and size information from someone with regard to the Height Control Valve Link Assembly? I am looking to fab one using (2) rod ends, jamb nuts and a long hex fitting. I sure many have already constructed this many times over in the past.
Thanks all and take care,
Tom
C. Boyd
76 Crestmont
East Tennessee
|
|
|
Re: Height Control Valve Link Assembly [message #361583 is a reply to message #361580] |
Sat, 09 January 2021 17:04 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
5/16 “ maybe ?
C Boyd wrote on Sat, 09 January 2021 18:00Sir, I used adjustable turn buckles from Home Depot. 1/4” I think.
Tom Katzenberger wrote on Sat, 09 January 2021 17:50Can I steel the parts and size information from someone with regard to the Height Control Valve Link Assembly? I am looking to fab one using (2) rod ends, jamb nuts and a long hex fitting. I sure many have already constructed this many times over in the past.
Thanks all and take care,
Tom
C. Boyd
76 Crestmont
East Tennessee
|
|
|